Re: No subsystem id (and therefore no cx88_dvb loaded) after reboot

[Ang Way Chuang <wcang@xxxxxxxx>]

Ang Way Chuang wrote:
> I experience similar problem with HVR4000 Lite cards that we have in the 
> lab. The card can't tune after cold boot, but a reboot will fix the 
> problem. I will check whether it has the similar invalid subsystem id 
> problem.

Unfortunately, I can't reproduce the cold boot tuning problem now. We'll 
send syslog information if our partner universities report the similar 
issue. Sorry.

> Grant Gardner wrote:
> > I'm looking for some pointers on debugging a problem with my DVICO
> > FusionHDTV Hybrid DVB-T card.
> >
> > The device was working perfectly prior to a reconfiguration of my 
> > machine,
> > kernel upgrade etc...
> >
> > Now, on a cold start everything seems to start smoothly but I can't tune
> > channels.
> >
> > Then, after a reboot the device is not detected due to "invalid subsystem
> > id". As below lspci reports no subsystem information at all.
> > Comparing the lspci output seems to be around the "Region 0: Memory at
> > ee000000 v de000000", but I'm not
> > sure what this means, and whether fixing the reboot problem will fix the
> > channel tuning problem.
> >
> > Running mythbuntu 8.10
> > 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64 GNU/Linux
> >
> > lspci -vvnn after cold start
> >
> > 00:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
> > CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
> >     Subsystem: DViCO Corporation Device [18ac:db40]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> > <TAbort-
> > <MAbort- >SERR- <PERR- INTx-
> >     Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
> >     Interrupt: pin A routed to IRQ 18
> >     Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
> >     Capabilities: [44] Vital Product Data <?>
> >     Capabilities: [4c] Power Management version 2
> >         Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: cx8800
> >     Kernel modules: cx8800
> >
> > 00:0a.1 Multimedia controller [0480]: Conexant Systems, Inc. 
> > CX23880/1/2/3
> > PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
> >     Subsystem: DViCO Corporation Device [18ac:db40]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> > <TAbort-
> > <MAbort- >SERR- <PERR- INTx-
> >     Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
> >     Interrupt: pin A routed to IRQ 11
> >     Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
> >     Capabilities: [4c] Power Management version 2
> >         Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel modules: cx88-alsa
> >
> > 00:0a.2 Multimedia controller [0480]: Conexant Systems, Inc. 
> > CX23880/1/2/3
> > PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
> >     Subsystem: DViCO Corporation Device [18ac:db40]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> > <TAbort-
> > <MAbort- >SERR- <PERR- INTx-
> >     Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
> >     Interrupt: pin A routed to IRQ 18
> >     Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
> >     Capabilities: [4c] Power Management version 2
> >         Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
currently, though we're working on a commercial implementation of the
RTP profile.

If you're interested in the GPL'ed UDP profile code, we can email it to
you in a week or two (we'll eventually make it available on our website
as well, but currently it needs to be cleaned up a bit).

T.C.
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: cx88-mpeg driver manager
> >     Kernel modules: cx8802
> >
> >
> > lspci -vvnn after warm reboot
> >
> > 00:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
> > CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
> >       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx-
> >       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >       Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
> >       Interrupt: pin A routed to IRQ 18
> >       Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
> >       Capabilities: [44] Vital Product Data <?>
> >       Capabilities: [4c] Power Management version 2
> >               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >       Kernel driver in use: cx8800
> >       Kernel modules: cx8800
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html