Hi, I own a Lifeview FlyDVB Hybrid LR-306N model; it is a PCI model, and I've been happily using it with my Mythtv for a couple of years, despite it was identified as a Cardbus model. About two months ago, I have upgraded kernel, and since then DVB function doesn't work anymore. I've checked what's changed, and I've noticed /var/log/messages once was something like: Dec 28 14:07:02 mumonkan kernel: [ 56.651901] saa7130/34: v4l2 driver version 0.2.14 loaded Dec 28 14:07:02 mumonkan kernel: [ 57.249000] saa7133[0]: found at 0000:00:09.0, rev: 208, irq: 19, latency: 32, mmio: 0xfebfe800 Dec 28 14:07:02 mumonkan kernel: [ 57.249083] saa7133[0]: subsystem: 5168:3306, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected] Dec 28 14:07:02 mumonkan kernel: [ 57.249173] saa7133[0]: board init: gpio is 210000 Dec 28 14:07:02 mumonkan kernel: [ 57.381216] saa7133[0]: i2c eeprom 00: 68 51 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 Dec 28 14:07:02 mumonkan kernel: [ 57.382161] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.383096] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 16 ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.384032] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.384967] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.385911] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.386848] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.387783] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Dec 28 14:07:02 mumonkan kernel: [ 57.400815] saa7133[0]: registered device video0 [v4l2] Dec 28 14:07:02 mumonkan kernel: [ 57.400995] saa7133[0]: registered device vbi0 Dec 28 14:07:02 mumonkan kernel: [ 57.401173] saa7133[0]: registered device radio0 Dec 28 14:07:02 mumonkan kernel: [ 129.568135] DVB: registering new adapter (saa7133[0]) Dec 28 14:07:02 mumonkan kernel: [ 129.568234] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... Dec 28 14:07:02 mumonkan kernel: [ 129.638878] tda1004x: setting up plls for 48MHz sampling clock Dec 28 14:07:02 mumonkan kernel: [ 131.632829] tda1004x: found firmware revision 29 -- ok Dec 28 14:07:31 mumonkan kernel: [ 214.693005] tda1004x: setting up plls for 48MHz sampling clock Dec 28 14:07:33 mumonkan kernel: [ 216.647008] tda1004x: found firmware revision 29 -- ok Now it goes like this: Feb 13 22:53:06 mumonkan [ 7.138352] saa7130/34: v4l2 driver version 0.2.14 loaded Feb 13 22:53:06 mumonkan [ 8.089793] saa7134 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Feb 13 22:53:06 mumonkan [ 8.089800] saa7133[0]: found at 0000:00:09.0, rev: 208, irq: 17, latency: 32, mmio: 0xfebfe800 Feb 13 22:53:06 mumonkan [ 8.089808] saa7133[0]: subsystem: 5168:3306, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected] Feb 13 22:53:06 mumonkan [ 8.089827] saa7133[0]: board init: gpio is 210000 Feb 13 22:53:06 mumonkan [ 8.240008] saa7133[0]: i2c eeprom 00: 68 51 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 Feb 13 22:53:06 mumonkan [ 8.240019] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240027] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 16 ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240036] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240044] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240060] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240068] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240076] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240084] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240092] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240100] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240108] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240116] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240124] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.240132] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 13 22:53:06 mumonkan [ 8.352063] tuner' 0-004b: chip found @ 0x96 (saa7133[0]) Feb 13 22:53:06 mumonkan [ 8.440007] tda829x 0-004b: setting tuner address to 61 Feb 13 22:53:06 mumonkan [ 8.508506] tda829x 0-004b: type set to tda8290+75a Feb 13 22:53:06 mumonkan [ 12.341578] saa7133[0]: registered device video0 [v4l2] Feb 13 22:53:06 mumonkan [ 12.341611] saa7133[0]: registered device vbi0 Feb 13 22:53:06 mumonkan [ 12.341634] saa7133[0]: registered device radio0 Feb 13 22:53:06 mumonkan [ 12.840571] DVB: registering new adapter (saa7133[0]) Feb 13 22:53:06 mumonkan [ 12.840578] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... Feb 13 22:53:06 mumonkan [ 12.912507] tda1004x: setting up plls for 48MHz sampling clock Feb 13 22:53:06 mumonkan [ 15.156506] tda1004x: timeout waiting for DSP ready Feb 13 22:53:06 mumonkan [ 15.196504] tda1004x: found firmware revision 0 -- invalid Feb 13 22:53:06 mumonkan [ 15.196507] tda1004x: trying to boot from eeprom Feb 13 22:53:06 mumonkan [ 17.524007] tda1004x: timeout waiting for DSP ready Feb 13 22:53:06 mumonkan [ 17.564005] tda1004x: found firmware revision 0 -- invalid Feb 13 22:53:06 mumonkan [ 17.564007] tda1004x: waiting for firmware upload... Feb 13 22:53:06 mumonkan [ 17.564011] firmware: requesting dvb-fe-tda10046.fw Feb 13 22:53:06 mumonkan [ 30.084007] tda1004x: found firmware revision 20 -- ok If I understand correctly, the main difference is that now tda1004x module seems to be unable to recognize already present firmware rev 29 (failing to start/un-reset device?). So it tries to load a new firmware, rev 20; maybe because of this, maybe because of an incorrect resetting procedure, anyway it doesn't work on my board: if I try to tune any station with tzap, I sometimes get FE_HAS_LOCK, sometimes I don't, but as I try to display video with mplayer I always get no video/audio (actually most of the times mplayer doesn't even show a windows). Actually, this is what happens since mid-february or so, after most recent changes to saa7134 module. Before that, the board was almost non-working, but behaviour was far less consistent. Usually tda1004x module, after trying loading firmware several times, gave up. Sometimes it started with firmware ver 20, and very rarely it was even usable, but frequently the board went stuck when changing channel, and stopped tuning anything anymore. Another oddity is that now analog TV consistently works without any problem, while during previous years often didn't (not always). I've tried going back in time, pulling from mercurial old versions trying to determine which patch had broken things, but I wasn't unable to compile older (than 8848?) versions with my current kernel, so I had to give up. So... is there anything to do? Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
