Riba Zoltán wrote: > Hi, > > I want to get working this card under my Debian > :(2.6.24-etchnhalf.1-686 on i686) > > http://www.zoneminder.com/wiki/index.php/Image:4ch_DVR_card.jpg > > But it doesn't want...: > dmesg: > > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Host bridge needs ETBF enabled. > bttv: Bt8xx card found (0). > PCI: Found IRQ 15 for device 0000:00:12.0 > PCI: Sharing IRQ 15 with 0000:00:07.2 > PCI: Sharing IRQ 15 with 0000:00:0b.0 > FPCI: Sharing IRQ 15 with 0000:00:12.1F > bttv0: Bt878 (rev 17) at 0000:00:12.0, irq: 15, latency: 32, mmio: > 0xd7001000 > bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option] > bttv0: enabling ETBF (430FX/VP3 compatibilty) > bttv0: gpio: en=00000000, out=00000000 in=00f360ff [init] > bt878 #0 [sw]: bus seems to be busy > bttv0: tuner absent > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 .. ok > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > PCI: Found IRQ 15 for device 0000:00:12.1 > PCI: Sharing IRQ 15 with 0000:00:07.2 > PCI: Sharing IRQ 15 with 0000:00:0b.0 > PCI: Sharing IRQ 15 with 0000:00:12.0 > bt878_probe: card id=[0x0], Unknown card.Exiting.. > bt878: probe of 0000:00:12.1 failed with error -22 > > lspci -vn no subsystem ID reported ... and no card id in dmesg ... I'm wondering if there is no EEPROM on the card .... also wondering if your card is different (i.e. a new revision) from the card 77 (GrandTec Multi Capture Card). What happens if you don't pass a modprobe parameter (i.e. comment out what you added in your relevant /etc/modprobe.conf file) and let the card autodetect ... (though, as maybe surmised from my above comment, I'm guessing a spectacular nothing ) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
