On Tue, Feb 17, 2009 at 7:58 AM, <svankan@xxxxxxxxxx> wrote: >>Hi! >> >>I don't have any diseqc problem with this card. >>Tested with vdr 1.7.0, scan-s2, szap-s2 (myTeVii and ProgDVB) >>ArchLinux 32-bit, kernel26 2.6.28.4 > > Thank you for the answer Frank! > > Can you please provide an example when you use scan-s2? I have a dual boot > for Windows and as far as I remember there were some problems with diseqc > in dvbviewer also. My dish is 25 meters away from the computer but signal > is very good. > > /Svankan Windows softwares are like that with new cards but they usually get supported when the card becomes popular. My dish is even farther that yours, i live in six floor apartment building with over 100 apartments we all share four dishes so every apartment is satellite ready. One thing that i hate about this card is scanning for channels, i think it doesn't support AUTO scanning for initial transponders. For that we have to use scan-s2 with -X option and you need transponder files from http://joshyfun.peque.org/transponders/kaffeine.html before you start scanning edit you transponder files and remove transponders that you don't need, stuff like feeds, beams that you can't receive because it takes allot of time. Every transponders that wont lock it scan as dvb-s and then it will rescan as dvb-s2. scan-s2 -a 1 -s 3 -t 1 -p -X ../ini/astra > test.conf -a 1= adaptern 1 -s 3 = diseqc input 4 (Astra 19E) -t 1 = Service TV only -p = for vdr output format: dump provider name -X = Disable AUTOs for initial transponders (esp. for hardware which not support it). Instead try each value of any free parameters. Log: initial transponder DVB-S2 12090000 V 27500000 3/4 20 8PSK initial transponder DVB-S 12110000 H 27500000 3/4 35 QPSK initial transponder DVB-S2 12110000 H 27500000 3/4 35 QPSK initial transponder DVB-S2 12110000 H 27500000 3/4 35 8PSK initial transponder DVB-S2 12110000 H 27500000 3/4 25 QPSK ... ----------------------------------> Using DVB-S >>> tune to: 10744:hC56M2O35S0:S0.0W:22000: DVB-S IF freq is 994000 >>> parse_section, section number 0 out of 0...! 0x041B 0x7031: pmt_pid 0x0000 ARD -- EinsExtra (running) 0x041B 0x7032: pmt_pid 0x0000 ARD -- EinsFestival (running) 0x041B 0x7033: pmt_pid 0x0000 ARD -- EinsPlus (running) 0x041B 0x7034: pmt_pid 0x0000 ARD -- arte (running) 0x041B 0x7035: pmt_pid 0x0000 ARD -- Phoenix (running) 0x041B 0x7036: pmt_pid 0x0000 ARD -- Test-R (running) >>> parse_section, section number 0 out of 0...! service_id = 0x0 service_id = 0x7031 pmt_pid = 0x64 service_id = 0x7032 pmt_pid = 0xC8 service_id = 0x7033 pmt_pid = 0x12C service_id = 0x7034 pmt_pid = 0x190 service_id = 0x7035 pmt_pid = 0x1F4 service_id = 0x7036 pmt_pid = 0x258 >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x012D AUDIO : PID 0x012E TELETEXT : PID 0x0130 OTHER : PID 0x0172 TYPE 0x05 OTHER : PID 0x0173 TYPE 0x0B OTHER : PID 0x0818 TYPE 0x0B >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x00C9 AUDIO : PID 0x00CA TELETEXT : PID 0x00CC OTHER : PID 0x010E TYPE 0x05 OTHER : PID 0x0818 TYPE 0x0B >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x0065 AUDIO : PID 0x0066 OTHER : PID 0x00AA TYPE 0x05 OTHER : PID 0x00AB TYPE 0x0B OTHER : PID 0x00AC TYPE 0x05 OTHER : PID 0x00AD TYPE 0x0B OTHER : PID 0x00B0 TYPE 0x0C OTHER : PID 0x0818 TYPE 0x0B >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x01F5 AUDIO : PID 0x01F6 TELETEXT : PID 0x01F8 OTHER : PID 0x0816 TYPE 0x05 OTHER : PID 0x0818 TYPE 0x0B >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x0191 AUDIO : PID 0x0192 AUDIO : PID 0x0193 TELETEXT : PID 0x0194 OTHER : PID 0x0816 TYPE 0x05 OTHER : PID 0x0818 TYPE 0x0B >>> parse_section, section number 0 out of 0...! VIDEO : PID 0x0191 AUDIO : PID 0x0192 ^CERROR: interrupted by SIGINT, dumping partial result... dumping lists (6 services) Done. .......................................... cat test.conf ARD - EinsExtra;ARD:10744:hC56M2O35S0:S0.0W:22000:101:102=ger:0:0:28721:1:1051:0 ARD - EinsFestival;ARD:10744:hC56M2O35S0:S0.0W:22000:201:202=ger:204:0:28722:1:1051:0 ARD - EinsPlus;ARD:10744:hC56M2O35S0:S0.0W:22000:301:302=ger:304:0:28723:1:1051:0 ARD - arte;ARD:10744:hC56M2O35S0:S0.0W:22000:401:402=ger,403=fra:404:0:28724:1:1051:0 ARD - Phoenix;ARD:10744:hC56M2O35S0:S0.0W:22000:501:502=ger:504:0:28725:1:1051:0 ARD - Test-R;ARD:10744:hC56M2O35S0:S0.0W:22000:401:402=ger:0:0:28726:1:1051:0 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
