Lots of codign style fixes and a typo correction for em28xx.
Priority: low
Signed-off-by: Nicola Soranzo <nsoranzo@xxxxxxxxxx>
---
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx-audio.c
--- a/linux/drivers/media/video/em28xx/em28xx-audio.c Mon Feb 02 10:33:31 2009
+0100
+++ b/linux/drivers/media/video/em28xx/em28xx-audio.c Mon Feb 09 12:47:13 2009
+0100
@@ -264,8 +264,7 @@
}
#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 16)
-static int snd_pcm_alloc_vmalloc_buffer(snd_pcm_substream_t *subs,
- size_t size)
+static int snd_pcm_alloc_vmalloc_buffer(snd_pcm_substream_t *subs, size_t
size)
#else
static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
size_t size)
@@ -277,7 +276,7 @@
struct snd_pcm_runtime *runtime = subs->runtime;
#endif
- dprintk("Alocating vbuffer\n");
+ dprintk("Allocating vbuffer\n");
if (runtime->dma_area) {
if (runtime->dma_bytes > size)
return 0;
@@ -454,8 +453,8 @@
{
struct em28xx *dev = snd_pcm_substream_chip(substream);
- dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START)?
- "start": "stop");
+ dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START) ?
+ "start" : "stop");
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 1);
@@ -476,8 +475,7 @@
*substream)
#endif
{
- unsigned long flags;
-
+ unsigned long flags;
struct em28xx *dev;
snd_pcm_uframes_t hwptr_done;
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Mon Feb 02 10:33:31 2009
+0100
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c Mon Feb 09 12:47:13 2009
+0100
@@ -534,7 +534,7 @@
},
[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
.name = "Yakumo MovieMixer",
- .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -902,11 +902,11 @@
} },
},
[EM2800_BOARD_GRABBEEX_USB2800] = {
- .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
- .is_em2800 = 1,
- .decoder = EM28XX_SAA711X,
- .tuner_type = TUNER_ABSENT, /* capture only board */
- .input = { {
+ .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
+ .is_em2800 = 1,
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* capture only board */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
@@ -1282,7 +1282,9 @@
.has_dvb = 1,
.dvb_gpio = kworld_330u_digital,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
- .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD
| EM28XX_I2C_EEPROM_KEY_VALID,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_EEPROM_ON_BOARD |
+ EM28XX_I2C_EEPROM_KEY_VALID,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1321,7 +1323,7 @@
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
/* table of devices that work with this driver */
-struct usb_device_id em28xx_id_table [] = {
+struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0x2750),
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2751),
@@ -1391,7 +1393,8 @@
{ USB_DEVICE(0x2040, 0x6500),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
{ USB_DEVICE(0x2040, 0x6502),
- .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
+ .driver_info =
+ EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
@@ -1425,10 +1428,11 @@
/*
* EEPROM hash table for devices with generic USB IDs
*/
-static struct em28xx_hash_table em28xx_eeprom_hash [] = {
+static struct em28xx_hash_table em28xx_eeprom_hash[] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
- {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
+ {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2,
+ TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
};
@@ -1457,7 +1461,7 @@
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
-static void inline em28xx_set_model(struct em28xx *dev)
+static inline void em28xx_set_model(struct em28xx *dev)
{
memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
@@ -2193,7 +2197,8 @@
/* Checks if audio is provided by some interface */
for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
uif = udev->config->interface[i];
- if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
+ if (uif->altsetting[0].desc.bInterfaceClass ==
+ USB_CLASS_AUDIO) {
dev->has_audio_class = 1;
break;
}
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx-core.c
--- a/linux/drivers/media/video/em28xx/em28xx-core.c Mon Feb 02 10:33:31 2009
+0100
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c Mon Feb 09 12:47:13 2009
+0100
@@ -33,8 +33,8 @@
/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
@@ -42,8 +42,8 @@
dev->name, __func__ , ##arg); } while (0)
static unsigned int reg_debug;
-module_param(reg_debug,int,0644);
-MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
+module_param(reg_debug, int, 0644);
+MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
@@ -77,7 +77,7 @@
return -EINVAL;
if (reg_debug) {
- printk( KERN_DEBUG "(pipe 0x%08x): "
+ printk(KERN_DEBUG "(pipe 0x%08x): "
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
pipe,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -154,7 +154,7 @@
if (reg_debug) {
int byte;
- printk( KERN_DEBUG "(pipe 0x%08x): "
+ printk(KERN_DEBUG "(pipe 0x%08x): "
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -462,7 +462,8 @@
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
int sel = ac97_return_record_select(dev->ctl_aoutput);
- /* Use the same input for both left and right channels */
+ /* Use the same input for both left and right
+ channels */
sel |= (sel << 8);
em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
@@ -698,7 +699,7 @@
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
/* it seems that both H and V scalers must be active
to work correctly */
- mode = (h || v)? 0x30: 0x00;
+ mode = (h || v) ? 0x30 : 0x00;
}
return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
}
@@ -954,7 +955,7 @@
em28xx_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
- in_interrupt()?" while in int":"");
+ in_interrupt() ? " while in int" : "");
em28xx_uninit_isoc(dev);
return -ENOMEM;
}
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx-i2c.c
--- a/linux/drivers/media/video/em28xx/em28xx-i2c.c Mon Feb 02 10:33:31 2009
+0100
+++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c Mon Feb 09 12:47:13 2009
+0100
@@ -399,13 +399,15 @@
break;
case 1:
printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
- dev->name);
+ dev->name);
break;
case 2:
- printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n", dev->name);
+ printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
+ dev->name);
break;
case 3:
- printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n", dev->name);
+ printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
+ dev->name);
break;
}
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx-video.c
--- a/linux/drivers/media/video/em28xx/em28xx-video.c Mon Feb 02 10:33:31 2009
+0100
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c Mon Feb 09 12:47:13 2009
+0100
@@ -186,7 +186,8 @@
em28xx_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
((char *)startwrite + lencopy) -
((char *)outp + buf->vb.size));
- lencopy = remain = (char *)outp + buf->vb.size - (char *)startwrite;
+ lencopy = remain = (char *)outp + buf->vb.size -
+ (char *)startwrite;
}
if (lencopy <= 0)
return;
@@ -202,7 +203,8 @@
else
lencopy = bytesperline;
- if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
+ if ((char *)startwrite + lencopy > (char *)outp +
+ buf->vb.size) {
em28xx_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
((char *)startwrite + lencopy) -
((char *)outp + buf->vb.size));
@@ -351,7 +353,7 @@
}
if (p[0] == 0x22 && p[1] == 0x5a) {
em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
- len, (p[2] & 1)? "odd" : "even");
+ len, (p[2] & 1) ? "odd" : "even");
if (!(p[2] & 1)) {
if (buf != NULL)
@@ -389,7 +391,8 @@
struct em28xx *dev = fh->dev;
struct v4l2_frequency f;
- *size = (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
+ *size = (fh->dev->width * fh->dev->height * dev->format->depth + 7) >>
+ 3;
if (0 == *count)
*count = EM28XX_DEF_BUF;
@@ -443,7 +446,8 @@
struct em28xx *dev = fh->dev;
int rc = 0, urb_init = 0;
- buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth + 7)
>> 3;
+ buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth +
+ 7) >> 3;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
@@ -480,7 +484,8 @@
static void
buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
{
- struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
+ struct em28xx_buffer *buf = container_of(vb,
+ struct em28xx_buffer, vb);
struct em28xx_fh *fh = vq->priv_data;
struct em28xx *dev = fh->dev;
struct em28xx_dmaqueue *vidq = &dev->vidq;
@@ -493,7 +498,8 @@
static void buffer_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
- struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
+ struct em28xx_buffer *buf = container_of(vb,
+ struct em28xx_buffer, vb);
struct em28xx_fh *fh = vq->priv_data;
struct em28xx *dev = (struct em28xx *)fh->dev;
@@ -561,7 +567,7 @@
static int res_check(struct em28xx_fh *fh)
{
- return (fh->stream_on);
+ return fh->stream_on;
}
static void res_free(struct em28xx_fh *fh)
@@ -795,7 +801,7 @@
return rc;
}
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
@@ -1483,7 +1489,7 @@
if (rc < 0)
return rc;
- return (videobuf_reqbufs(&fh->vb_vidq, rb));
+ return videobuf_reqbufs(&fh->vb_vidq, rb);
}
static int vidioc_querybuf(struct file *file, void *priv,
@@ -1497,7 +1503,7 @@
if (rc < 0)
return rc;
- return (videobuf_querybuf(&fh->vb_vidq, b));
+ return videobuf_querybuf(&fh->vb_vidq, b);
}
static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1510,7 +1516,7 @@
if (rc < 0)
return rc;
- return (videobuf_qbuf(&fh->vb_vidq, b));
+ return videobuf_qbuf(&fh->vb_vidq, b);
}
static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1523,8 +1529,7 @@
if (rc < 0)
return rc;
- return (videobuf_dqbuf(&fh->vb_vidq, b,
- file->f_flags & O_NONBLOCK));
+ return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
@@ -1848,7 +1853,7 @@
* em28xx_v4l2_poll()
* will allocate buffers when called for the first time
*/
-static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait)
+static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait)
{
struct em28xx_fh *fh = filp->private_data;
struct em28xx *dev = fh->dev;
@@ -2006,8 +2011,8 @@
static struct video_device *em28xx_vdev_init(struct em28xx *dev,
- const struct video_device *template,
- const char *type_name)
+ const struct video_device *template,
+ const char *type_name)
{
struct video_device *vfd;
@@ -2057,8 +2062,9 @@
/* enable vbi capturing */
/* em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
- val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
- em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE |
val));
+ val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE |
+ val));
em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
#endif
@@ -2094,7 +2100,8 @@
}
if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
- dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+ dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template,
+ "radio");
if (!dev->radio_dev) {
em28xx_errdev("cannot allocate video_device.\n");
return -ENODEV;
diff -r 71e5a36634ea linux/drivers/media/video/em28xx/em28xx.h
--- a/linux/drivers/media/video/em28xx/em28xx.h Mon Feb 02 10:33:31 2009 +0100
+++ b/linux/drivers/media/video/em28xx/em28xx.h Mon Feb 09 12:47:13 2009 +0100
@@ -156,7 +156,8 @@
*/
/* time to wait when stopping the isoc transfer */
-#define EM28XX_URB_TIMEOUT msecs_to_jiffies(EM28XX_NUM_BUFS *
EM28XX_NUM_PACKETS)
+#define EM28XX_URB_TIMEOUT \
+ msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
/* time in msecs to wait for i2c writes to finish */
#define EM2800_I2C_WRITE_TIMEOUT 20
@@ -533,7 +534,8 @@
int num_alt; /* Number of alternative settings */
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
- char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer
*/
+ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc
+ transfer */
char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
/* helper funcs that call usb_control_msg */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
