Not sure if it's the same issue, but we had the similar problem with the
ASUS 3100 mycinema DVB-TH card
killing off this function appeared to fix it..
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
struct input_dev *input_dev;
return 0;
}
Regards
Alan
Brett wrote:
Hello,
I have a dvb_usb_dib0700 (Nova 500 dual) card and it shows similar
issues to the dvb_usb_dib3000mc card, ie:
"This card has an issue (which particularly manifests itself in
Australia where a bandwidth of 7MHz is used) with jittery reception -
artifacts and choppy sound throughout recordings despite having full
signal strength. Australian users will typically see this behaviour on
SBS and ABC channels"
The fix for the dib3000mc is to enable the 'buggy sfn workaround' but
there is no such option for the dib 0700 :
The buggy sfn workaround workaround does "dib7000p_write_word(state,
166, 0x4000);" if it is active, or "dib7000p_write_word(state, 166,
0x0000)" if it inactive, in the dib3000mc driver. I presume this
tweaks a bandwidth filter or something similar for the dib3000mc, is
there such an equivalent feature for the dib0700 chipset ?
Does anybody have specs on the dib0700 that describes registers, or
how to set tuner bandwidth etc., during tuning ?
Cheers
Brett
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
