> Hi, > > checked it again. Your lnbp21 patch definitely kills S2 tuning > on the Terratec Cinergy S2 PCI HD. > > mfg > > Edgar ( gimli ) Hucek I looked at it again and here is a new patch to set the LNBP21 options for the Twinhan VP-1041. This works better for me, including DVB-S2 channels. The EN enable bit is now not permanently set so sleep behavior is correct. Please note that I have a DiSEqC 1.2 rotor between the VP-1041 card and the LNB. That is quite a normal configuration, but the driver was probably not properly tested with rotors (and switches?) before. To rotate with scan-s2 use the patch I posted, which will be applied there soon: http://linuxtv.org/pipermail/linux-dvb/2009-January/031660.html Regards, Hans Patch is against latest http://mercurial.intuxication.org/hg/s2-liplianin repo. Signed-off-by: Hans Werner <hwerner4@xxxxxx> diff -r 084878324629 linux/drivers/media/dvb/mantis/mantis_dvb.c --- a/linux/drivers/media/dvb/mantis/mantis_dvb.c +++ b/linux/drivers/media/dvb/mantis/mantis_dvb.c @@ -239,7 +239,8 @@ int __devinit mantis_frontend_init(struc vp1041_config.demod_address); if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, &mantis->adapter)) { - if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0)) { + // static current limit, no extra 1V, high current limit, tone from DSQIN pin (stb0899) + if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL , LNBP21_LLC | LNBP21_ISEL | LNBP21_TEN)) { printk("%s: No LNBP21 found!\n", __FUNCTION__); mantis->fe = NULL; } -- Release early, release often. Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
