Hi, Jens Krehbiel-Gräther schrieb: > Artem Makhutov schrieb: > >> Hello, >> >> I am wondering on how to use scan-s2. >> >> When running scan-s2 like this I am only getting 13 services: >> >> scan-s2 -a 2 -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf >> >> when running >> >> scan-s2 -a 2 -n -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf >> >> then I am getting 152 services. >> >> When running the old dvbscan application I am getting 1461 services: >> >> dvbscan -a 2 -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf >> >> >> Have I missed a parameter in scan-s2 or what else could be the problem? >> >> Thanks, Artem >> > > > Hi Artem! > > I had the same "problem".When add no options I am only getting a few > services. > When I add the "-n" option I get some more services but all services I > only get, when I am adding "-n -5". > > the "-5" means: > multiply all filter timeouts by factor 5 for non-DVB-compliant section > repitition rates > > The scan takes a long time then, but I get 1476 services (Astra 19.2). > My device is a Pinnacle PCTV 452e (USB). > Perhaps this switch is working with your device, too? > I just tried it out. It does not work :( I am getting 217 services now. So I am still missing ~1200 services. I have run the scan using a TeVii S650. Now I have run then same using my SkyStar HD and I got 1467 services. So there is something not working using the TeVii S650... Any ideas? Regards, Artem -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
