Mike Isely wrote: > Why is this change needed? (Please point me at a discussion thread, if > you'd like...) > > -Mike > I remember this list of patches: https://kerneltrap.org/mailarchive/linux-usb/2008/10/17/3708324 and https://kerneltrap.org/mailarchive/linux-usb/2008/10/17/3709124 I think this is related. This is just the extension of these modifications. Thierry > > On Thu, 8 Jan 2009, Mauro Carvalho Chehab wrote: > >> Alexey, >> >> You should get the driver maintainer's ack or at least let them know that >> you're touching on their drivers. >> >> Mike, Thierry an Dean, >> >> Could you please review this patch? >> >> Cheers, >> Mauro. >> >> Forwarded message: >> >> Date: Thu, 01 Jan 2009 11:06:08 +0300 >> From: Alexey Klimov <klimov.linux@xxxxxxxxx> >> To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> >> Cc: video4linux-list@xxxxxxxxxx, Greg KH <greg@xxxxxxxxx> >> Subject: [PATCH] v4l/dvb: remove err macro from few usb devices >> >> >> Hello all >> I re-send this patch. Previous time i sent i get no response. >> Please nack, apply or criticize :) >> >> -- >> >> Patch removes err() macros from few usb devices. >> It places pr_err in pvrusb2-v4l2.c, dev_err in dabusb and in usbvision >> drivers. Beside placing dev_err, patch defines new s2255_dev_err macro >> with S2255_DRIVER_NAME in s2255 module. >> >> Signed-off-by: Alexey Klimov <klimov.linux@xxxxxxxxx> >> >> --- >> diff -r 6a189bc8f115 linux/drivers/media/video/dabusb.c >> --- a/linux/drivers/media/video/dabusb.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/dabusb.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -199,17 +199,20 @@ >> dst += len; >> } >> else >> - err("dabusb_iso_complete: invalid len %d", len); >> + dev_err(&purb->dev->dev, >> + "dabusb_iso_complete: invalid len %d\n", len); >> } >> else >> dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status); >> if (dst != purb->actual_length) >> - err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length); >> + dev_err(&purb->dev->dev, >> + "dst!=purb->actual_length:%d!=%d\n", >> + dst, purb->actual_length); >> } >> >> if (atomic_dec_and_test (&s->pending_io) && !s->remove_pending && s->state != _stopped) { >> s->overruns++; >> - err("overrun (%d)", s->overruns); >> + dev_err(&purb->dev->dev, "overrun (%d)\n", s->overruns); >> } >> wake_up (&s->wait); >> } >> @@ -230,13 +233,14 @@ >> while (transfer_len < (s->total_buffer_size << 10)) { >> b = kzalloc(sizeof (buff_t), GFP_KERNEL); >> if (!b) { >> - err("kzalloc(sizeof(buff_t))==NULL"); >> + dev_err(&s->usbdev->dev, >> + "kzalloc(sizeof(buff_t))==NULL\n"); >> goto err; >> } >> b->s = s; >> b->purb = usb_alloc_urb(packets, GFP_KERNEL); >> if (!b->purb) { >> - err("usb_alloc_urb == NULL"); >> + dev_err(&s->usbdev->dev, "usb_alloc_urb == NULL\n"); >> kfree (b); >> goto err; >> } >> @@ -245,7 +249,8 @@ >> if (!b->purb->transfer_buffer) { >> kfree (b->purb); >> kfree (b); >> - err("kmalloc(%d)==NULL", transfer_buffer_length); >> + dev_err(&s->usbdev->dev, >> + "kmalloc(%d)==NULL\n", transfer_buffer_length); >> goto err; >> } >> >> @@ -289,10 +294,11 @@ >> >> ret=usb_bulk_msg(s->usbdev, pipe, pb->data, pb->size, &actual_length, 100); >> if(ret<0) { >> - err("dabusb: usb_bulk_msg failed(%d)",ret); >> + dev_err(&s->usbdev->dev, >> + "usb_bulk_msg failed(%d)\n", ret); >> >> if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { >> - err("set_interface failed"); >> + dev_err(&s->usbdev->dev, "set_interface failed\n"); >> return -EINVAL; >> } >> >> @@ -301,7 +307,7 @@ >> if( ret == -EPIPE ) { >> dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n"); >> if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe))) >> - err("request failed"); >> + dev_err(&s->usbdev->dev, "request failed\n"); >> } >> >> pb->size = actual_length; >> @@ -319,7 +325,8 @@ >> unsigned char *transfer_buffer = kmalloc (len, GFP_KERNEL); >> >> if (!transfer_buffer) { >> - err("dabusb_writemem: kmalloc(%d) failed.", len); >> + dev_err(&s->usbdev->dev, >> + "dabusb_writemem: kmalloc(%d) failed.\n", len); >> return -ENOMEM; >> } >> >> @@ -352,7 +359,8 @@ >> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) >> ret = request_ihex_firmware(&fw, "dabusb/firmware.fw", &s->usbdev->dev); >> if (ret) { >> - err("Failed to load \"dabusb/firmware.fw\": %d\n", ret); >> + dev_err(&s->usbdev->dev, >> + "Failed to load \"dabusb/firmware.fw\": %d\n", ret); >> goto out; >> } >> #endif >> @@ -378,11 +386,14 @@ >> #endif >> if (ret < 0) { >> #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) >> - err("dabusb_writemem failed (%d %04X %p %d)", ret, ptr->Address, ptr->Data, ptr->Length); >> + dev_err(&s->usbdev->dev, >> + "dabusb_writemem failed (%d %04X %p %d)\n", >> + ret, ptr->Address, ptr->Data, ptr->Length); >> #else >> - err("dabusb_writemem failed (%d %04X %p %d)", ret, >> - be32_to_cpu(rec->addr), rec->data, >> - be16_to_cpu(rec->len)); >> + dev_err(&s->usbdev->dev, >> + "dabusb_writemem failed (%d %04X %p %d)\n", >> + ret, be32_to_cpu(rec->addr), >> + rec->data, be16_to_cpu(rec->len)); >> #endif >> break; >> } >> @@ -443,14 +454,16 @@ >> dbg("Enter dabusb_fpga_download (internal)"); >> >> if (!b) { >> - err("kmalloc(sizeof(bulk_transfer_t))==NULL"); >> + dev_err(&s->usbdev->dev, >> + "kmalloc(sizeof(bulk_transfer_t))==NULL\n"); >> return -ENOMEM; >> } >> >> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) >> ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev); >> if (ret) { >> - err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret); >> + dev_err(&s->usbdev->dev, >> + "Failed to load \"dabusb/bitstream.bin\": %d\n", ret); >> kfree(b); >> return ret; >> } >> @@ -482,7 +495,7 @@ >> #endif >> ret = dabusb_bulk (s, b); >> if (ret < 0) { >> - err("dabusb_bulk failed."); >> + dev_err(&s->usbdev->dev, "dabusb_bulk failed.\n"); >> break; >> } >> mdelay (1); >> @@ -537,9 +550,11 @@ >> >> ret = usb_submit_urb (end->purb, GFP_KERNEL); >> if (ret) { >> - err("usb_submit_urb returned:%d", ret); >> + dev_err(&s->usbdev->dev, >> + "usb_submit_urb returned:%d\n", ret); >> if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) >> - err("startrek: dabusb_add_buf_tail failed"); >> + dev_err(&s->usbdev->dev, >> + "startrek: dabusb_add_buf_tail failed\n"); >> break; >> } >> else >> @@ -582,7 +597,8 @@ >> >> spin_unlock_irqrestore(&s->lock, flags); >> >> - err("error: rec_buf_list is empty"); >> + dev_err(&s->usbdev->dev, >> + "error: rec_buf_list is empty\n"); >> goto err; >> } >> >> @@ -611,7 +627,8 @@ >> >> if (list_empty (&s->rec_buff_list)) { >> spin_unlock_irqrestore(&s->lock, flags); >> - err("error: still no buffer available."); >> + dev_err(&s->usbdev->dev, >> + "error: still no buffer available.\n"); >> goto err; >> } >> spin_unlock_irqrestore(&s->lock, flags); >> @@ -632,7 +649,7 @@ >> dbg("copy_to_user:%p %p %d",buf, purb->transfer_buffer + s->readptr, cnt); >> >> if (copy_to_user (buf, purb->transfer_buffer + s->readptr, cnt)) { >> - err("read: copy_to_user failed"); >> + dev_err(&s->usbdev->dev, "read: copy_to_user failed\n"); >> if (!ret) >> ret = -EFAULT; >> goto err; >> @@ -646,7 +663,8 @@ >> if (s->readptr == purb->actual_length) { >> // finished, take next buffer >> if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) >> - err("read: dabusb_add_buf_tail failed"); >> + dev_err(&s->usbdev->dev, >> + "read: dabusb_add_buf_tail failed\n"); >> s->readptr = 0; >> } >> } >> @@ -682,7 +700,7 @@ >> } >> if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { >> mutex_unlock(&s->mutex); >> - err("set_interface failed"); >> + dev_err(&s->usbdev->dev, "set_interface failed\n"); >> return -EINVAL; >> } >> s->opened = 1; >> @@ -707,7 +725,7 @@ >> >> if (!s->remove_pending) { >> if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) >> - err("set_interface failed"); >> + dev_err(&s->usbdev->dev, "set_interface failed\n"); >> } >> else >> wake_up (&s->remove_ok); >> @@ -827,7 +845,7 @@ >> s->devnum = intf->minor; >> >> if (usb_reset_configuration (usbdev) < 0) { >> - err("reset_configuration failed"); >> + dev_err(&intf->dev, "reset_configuration failed\n"); >> goto reject; >> } >> if (le16_to_cpu(usbdev->descriptor.idProduct) == 0x2131) { >> @@ -838,7 +856,7 @@ >> dabusb_fpga_download (s, NULL); >> >> if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) { >> - err("set_interface failed"); >> + dev_err(&intf->dev, "set_interface failed\n"); >> goto reject; >> } >> } >> diff -r 6a189bc8f115 linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c >> --- a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -1275,8 +1275,9 @@ >> dip->minor_type = pvr2_v4l_type_video; >> nr_ptr = video_nr; >> if (!dip->stream) { >> - err("Failed to set up pvrusb2 v4l video dev" >> - " due to missing stream instance"); >> + pr_err(KBUILD_MODNAME >> + ": Failed to set up pvrusb2 v4l video dev" >> + " due to missing stream instance\n"); >> return; >> } >> break; >> @@ -1293,8 +1294,8 @@ >> break; >> default: >> /* Bail out (this should be impossible) */ >> - err("Failed to set up pvrusb2 v4l dev" >> - " due to unrecognized config"); >> + pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev" >> + " due to unrecognized config\n"); >> return; >> } >> >> @@ -1310,7 +1311,8 @@ >> dip->v4l_type, mindevnum) < 0) && >> (video_register_device(&dip->devbase, >> dip->v4l_type, -1) < 0)) { >> - err("Failed to register pvrusb2 v4l device"); >> + pr_err(KBUILD_MODNAME >> + ": Failed to register pvrusb2 v4l device\n"); >> } >> >> printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n", >> diff -r 6a189bc8f115 linux/drivers/media/video/s2255drv.c >> --- a/linux/drivers/media/video/s2255drv.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/s2255drv.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -337,13 +337,18 @@ >> u16 index, u16 value, void *buf, >> s32 buf_len, int bOut); >> >> +/* dev_err macro with driver name */ >> +#define S2255_DRIVER_NAME "s2255" >> +#define s2255_dev_err(dev, fmt, arg...) \ >> + dev_err(dev, S2255_DRIVER_NAME " - " fmt, ##arg) >> + >> #define dprintk(level, fmt, arg...) \ >> do { \ >> if (*s2255_debug >= (level)) { \ >> - printk(KERN_DEBUG "s2255: " fmt, ##arg); \ >> + printk(KERN_DEBUG S2255_DRIVER_NAME \ >> + ": " fmt, ##arg); \ >> } \ >> } while (0) >> - >> >> static struct usb_driver s2255_driver; >> >> @@ -529,14 +534,14 @@ >> int len; >> dprintk(100, "udev %p urb %p", udev, urb); >> if (urb->status) { >> - dev_err(&udev->dev, "URB failed with status %d", urb->status); >> + dev_err(&udev->dev, "URB failed with status %d\n", urb->status); >> atomic_set(&data->fw_state, S2255_FW_FAILED); >> /* wake up anything waiting for the firmware */ >> wake_up(&data->wait_fw); >> return; >> } >> if (data->fw_urb == NULL) { >> - dev_err(&udev->dev, "s2255 disconnected\n"); >> + s2255_dev_err(&udev->dev, "disconnected\n"); >> atomic_set(&data->fw_state, S2255_FW_FAILED); >> /* wake up anything waiting for the firmware */ >> wake_up(&data->wait_fw); >> @@ -1279,7 +1284,7 @@ >> } >> >> if (!res_get(dev, fh)) { >> - dev_err(&dev->udev->dev, "s2255: stream busy\n"); >> + s2255_dev_err(&dev->udev->dev, "stream busy\n"); >> return -EBUSY; >> } >> >> @@ -1546,7 +1551,8 @@ >> >> switch (atomic_read(&dev->fw_data->fw_state)) { >> case S2255_FW_FAILED: >> - err("2255 firmware load failed. retrying.\n"); >> + s2255_dev_err(&dev->udev->dev, >> + "firmware load failed. retrying.\n"); >> s2255_fwload_start(dev, 1); >> wait_event_timeout(dev->fw_data->wait_fw, >> ((atomic_read(&dev->fw_data->fw_state) >> @@ -2174,7 +2180,8 @@ >> >> printk(KERN_INFO "2255 usb firmware version %d \n", fw_ver); >> if (fw_ver < CUR_USB_FWVER) >> - err("usb firmware not up to date %d\n", fw_ver); >> + dev_err(&dev->udev->dev, >> + "usb firmware not up to date %d\n", fw_ver); >> >> for (j = 0; j < MAX_CHANNELS; j++) { >> dev->b_acquire[j] = 0; >> @@ -2229,13 +2236,13 @@ >> dprintk(100, "read pipe completion %p, status %d\n", purb, >> purb->status); >> if (pipe_info == NULL) { >> - err("no context !"); >> + dev_err(&purb->dev->dev, "no context!\n"); >> return; >> } >> >> dev = pipe_info->dev; >> if (dev == NULL) { >> - err("no context !"); >> + dev_err(&purb->dev->dev, "no context!\n"); >> return; >> } >> status = purb->status; >> @@ -2287,7 +2294,7 @@ >> pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); >> if (!pipe_info->stream_urb) { >> dev_err(&dev->udev->dev, >> - "ReadStream: Unable to alloc URB"); >> + "ReadStream: Unable to alloc URB\n"); >> return -ENOMEM; >> } >> /* transfer buffer allocated in board_init */ >> @@ -2392,7 +2399,7 @@ >> int j; >> >> if (dev == NULL) { >> - err("s2255: invalid device"); >> + s2255_dev_err(&dev->udev->dev, "invalid device\n"); >> return; >> } >> dprintk(4, "stop read pipe\n"); >> @@ -2454,7 +2461,7 @@ >> /* allocate memory for our device state and initialize it to zero */ >> dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL); >> if (dev == NULL) { >> - err("s2255: out of memory"); >> + s2255_dev_err(&interface->dev, "out of memory\n"); >> goto error; >> } >> >> @@ -2488,7 +2495,7 @@ >> } >> >> if (!dev->read_endpoint) { >> - dev_err(&interface->dev, "Could not find bulk-in endpoint"); >> + dev_err(&interface->dev, "Could not find bulk-in endpoint\n"); >> goto error; >> } >> >> @@ -2584,7 +2591,7 @@ >> } >> >> static struct usb_driver s2255_driver = { >> - .name = "s2255", >> + .name = S2255_DRIVER_NAME, >> .probe = s2255_probe, >> .disconnect = s2255_disconnect, >> .id_table = s2255_table, >> @@ -2598,7 +2605,8 @@ >> result = usb_register(&s2255_driver); >> >> if (result) >> - err("usb_register failed. Error number %d", result); >> + pr_err(KBUILD_MODNAME >> + ": usb_register failed. Error number %d\n", result); >> >> dprintk(2, "s2255_init: done\n"); >> return result; >> diff -r 6a189bc8f115 linux/drivers/media/video/usbvision/usbvision-core.c >> --- a/linux/drivers/media/video/usbvision/usbvision-core.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/usbvision/usbvision-core.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -381,8 +381,9 @@ >> usbvision->scratch = vmalloc_32(scratch_buf_size); >> scratch_reset(usbvision); >> if(usbvision->scratch == NULL) { >> - err("%s: unable to allocate %d bytes for scratch", >> - __func__, scratch_buf_size); >> + dev_err(&usbvision->dev->dev, >> + "%s: unable to allocate %d bytes for scratch\n", >> + __func__, scratch_buf_size); >> return -ENOMEM; >> } >> return 0; >> @@ -491,8 +492,9 @@ >> int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2; >> usbvision->IntraFrameBuffer = vmalloc_32(IFB_size); >> if (usbvision->IntraFrameBuffer == NULL) { >> - err("%s: unable to allocate %d for compr. frame buffer", >> - __func__, IFB_size); >> + dev_err(&usbvision->dev->dev, >> + "%s: unable to allocate %d for compr. frame buffer\n", >> + __func__, IFB_size); >> return -ENOMEM; >> } >> return 0; >> @@ -1519,8 +1521,9 @@ >> errCode = usb_submit_urb (urb, GFP_ATOMIC); >> >> if(errCode) { >> - err("%s: usb_submit_urb failed: error %d", >> - __func__, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s: usb_submit_urb failed: error %d\n", >> + __func__, errCode); >> } >> >> return; >> @@ -1551,7 +1554,8 @@ >> 0, (__u16) reg, buffer, 1, HZ); >> >> if (errCode < 0) { >> - err("%s: failed: error %d", __func__, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s: failed: error %d\n", __func__, errCode); >> return errCode; >> } >> return buffer[0]; >> @@ -1579,7 +1583,8 @@ >> USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ); >> >> if (errCode < 0) { >> - err("%s: failed: error %d", __func__, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s: failed: error %d\n", __func__, errCode); >> } >> return errCode; >> } >> @@ -1859,7 +1864,8 @@ >> 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ); >> >> if (errCode < 0) { >> - err("%s failed: error %d", __func__, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s failed: error %d\n", __func__, errCode); >> return errCode; >> } >> usbvision->curwidth = usbvision->stretch_width * UsbWidth; >> @@ -2245,7 +2251,7 @@ >> (__u16) USBVISION_DRM_PRM1, value, 8, HZ); >> >> if (rc < 0) { >> - err("%sERROR=%d", __func__, rc); >> + dev_err(&usbvision->dev->dev, "%sERROR=%d\n", __func__, rc); >> return rc; >> } >> >> @@ -2453,8 +2459,9 @@ >> PDEBUG(DBG_FUNC,"setting alternate %d with wMaxPacketSize=%u", dev->ifaceAlt,dev->isocPacketSize); >> errCode = usb_set_interface(dev->dev, dev->iface, dev->ifaceAlt); >> if (errCode < 0) { >> - err ("cannot change alternate number to %d (error=%i)", >> - dev->ifaceAlt, errCode); >> + dev_err(&dev->dev->dev, >> + "cannot change alternate number to %d (error=%i)\n", >> + dev->ifaceAlt, errCode); >> return errCode; >> } >> } >> @@ -2505,7 +2512,8 @@ >> >> urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); >> if (urb == NULL) { >> - err("%s: usb_alloc_urb() failed", __func__); >> + dev_err(&usbvision->dev->dev, >> + "%s: usb_alloc_urb() failed\n", __func__); >> return -ENOMEM; >> } >> usbvision->sbuf[bufIdx].urb = urb; >> @@ -2537,8 +2545,9 @@ >> errCode = usb_submit_urb(usbvision->sbuf[bufIdx].urb, >> GFP_KERNEL); >> if (errCode) { >> - err("%s: usb_submit_urb(%d) failed: error %d", >> - __func__, bufIdx, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s: usb_submit_urb(%d) failed: error %d\n", >> + __func__, bufIdx, errCode); >> } >> } >> >> @@ -2587,8 +2596,9 @@ >> errCode = usb_set_interface(usbvision->dev, usbvision->iface, >> usbvision->ifaceAlt); >> if (errCode < 0) { >> - err("%s: usb_set_interface() failed: error %d", >> - __func__, errCode); >> + dev_err(&usbvision->dev->dev, >> + "%s: usb_set_interface() failed: error %d\n", >> + __func__, errCode); >> usbvision->last_error = errCode; >> } >> regValue = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; >> diff -r 6a189bc8f115 linux/drivers/media/video/usbvision/usbvision-i2c.c >> --- a/linux/drivers/media/video/usbvision/usbvision-i2c.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/usbvision/usbvision-i2c.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -120,7 +120,8 @@ >> /* try extended address code... */ >> ret = try_write_address(i2c_adap, addr, retries); >> if (ret != 1) { >> - err("died at extended address code, while writing"); >> + dev_err(&i2c_adap->dev, >> + "died at extended address code, while writing\n"); >> return -EREMOTEIO; >> } >> add[0] = addr; >> @@ -129,7 +130,8 @@ >> addr |= 0x01; >> ret = try_read_address(i2c_adap, addr, retries); >> if (ret != 1) { >> - err("died at extended address code, while reading"); >> + dev_err(&i2c_adap->dev, >> + "died at extended address code, while reading\n"); >> return -EREMOTEIO; >> } >> } >> diff -r 6a189bc8f115 linux/drivers/media/video/usbvision/usbvision-video.c >> --- a/linux/drivers/media/video/usbvision/usbvision-video.c Wed Dec 31 15:26:57 2008 -0200 >> +++ b/linux/drivers/media/video/usbvision/usbvision-video.c Thu Jan 01 10:59:06 2009 +0300 >> @@ -329,7 +329,7 @@ >> return; >> } while (0); >> >> - err("%s error: %d\n", __func__, res); >> + dev_err(&vdev->dev, "%s error: %d\n", __func__, res); >> } >> >> static void usbvision_remove_sysfs(struct video_device *vdev) >> @@ -487,8 +487,9 @@ >> /* NT100x has a 8-bit register space */ >> errCode = usbvision_read_reg(usbvision, reg->reg&0xff); >> if (errCode < 0) { >> - err("%s: VIDIOC_DBG_G_REGISTER failed: error %d", >> - __func__, errCode); >> + dev_err(&usbvision->vdev->dev, >> + "%s: VIDIOC_DBG_G_REGISTER failed: error %d\n", >> + __func__, errCode); >> return errCode; >> } >> reg->val = errCode; >> @@ -507,8 +508,9 @@ >> /* NT100x has a 8-bit register space */ >> errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); >> if (errCode < 0) { >> - err("%s: VIDIOC_DBG_S_REGISTER failed: error %d", >> - __func__, errCode); >> + dev_err(&usbvision->vdev->dev, >> + "%s: VIDIOC_DBG_S_REGISTER failed: error %d\n", >> + __func__, errCode); >> return errCode; >> } >> return 0; >> @@ -1189,7 +1191,9 @@ >> mutex_lock(&usbvision->lock); >> >> if (usbvision->user) { >> - err("%s: Someone tried to open an already opened USBVision Radio!", __func__); >> + dev_err(&usbvision->rdev->dev, >> + "%s: Someone tried to open an already opened USBVision Radio!\n", >> + __func__); >> errCode = -EBUSY; >> } >> else { >> @@ -1413,7 +1417,8 @@ >> struct video_device *vdev; >> >> if (usb_dev == NULL) { >> - err("%s: usbvision->dev is not set", __func__); >> + dev_err(&usbvision->dev->dev, >> + "%s: usbvision->dev is not set\n", __func__); >> return NULL; >> } >> >> @@ -1524,7 +1529,9 @@ >> return 0; >> >> err_exit: >> - err("USBVision[%d]: video_register_device() failed", usbvision->nr); >> + dev_err(&usbvision->dev->dev, >> + "USBVision[%d]: video_register_device() failed\n", >> + usbvision->nr); >> usbvision_unregister_video(usbvision); >> return -1; >> } >> @@ -1676,20 +1683,20 @@ >> endpoint = &interface->endpoint[1].desc; >> if (usb_endpoint_type(endpoint) != >> USB_ENDPOINT_XFER_ISOC) { >> - err("%s: interface %d. has non-ISO endpoint!", >> + dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n", >> __func__, ifnum); >> - err("%s: Endpoint attributes %d", >> + dev_err(&intf->dev, "%s: Endpoint attributes %d", >> __func__, endpoint->bmAttributes); >> return -ENODEV; >> } >> if (usb_endpoint_dir_out(endpoint)) { >> - err("%s: interface %d. has ISO OUT endpoint!", >> + dev_err(&intf->dev, "%s: interface %d. has ISO OUT endpoint!\n", >> __func__, ifnum); >> return -ENODEV; >> } >> >> if ((usbvision = usbvision_alloc(dev)) == NULL) { >> - err("%s: couldn't allocate USBVision struct", __func__); >> + dev_err(&intf->dev, "%s: couldn't allocate USBVision struct\n", __func__); >> return -ENOMEM; >> } >> >> @@ -1712,7 +1719,7 @@ >> usbvision->alt_max_pkt_size = kmalloc(32* >> usbvision->num_alt,GFP_KERNEL); >> if (usbvision->alt_max_pkt_size == NULL) { >> - err("usbvision: out of memory!\n"); >> + dev_err(&intf->dev, "usbvision: out of memory!\n"); >> mutex_unlock(&usbvision->lock); >> return -ENOMEM; >> } >> @@ -1773,7 +1780,8 @@ >> PDEBUG(DBG_PROBE, ""); >> >> if (usbvision == NULL) { >> - err("%s: usb_get_intfdata() failed", __func__); >> + dev_err(&usbvision->dev->dev, >> + "%s: usb_get_intfdata() failed\n", __func__); >> return; >> } >> usb_set_intfdata (intf, NULL); >> >> >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html