On Tue, Sep 26, 2023 at 02:11:57PM -0500, Don Brace wrote:
> Minor changes to the descriptions of the following module parameters:
> disable_device_id_wildcards
> disable_heartbeat
> disable_ctrl_shutdown
> expose_ld_first
> hide_vsep
>
> Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
> Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
> Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
> Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
> Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
> ---
Patch applied.
Thanks,
Alex
> man4/smartpqi.4 | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/man4/smartpqi.4 b/man4/smartpqi.4
> index 463976f88cea..428d79a19840 100644
> --- a/man4/smartpqi.4
> +++ b/man4/smartpqi.4
> @@ -66,17 +66,17 @@ Allows BMIC and CISS commands to be passed through to the controller.
> .TP
> .BR disable_device_id_wildcards= { 0 | 1 }
> Disables support for device ID wildcards.
> -The default value is 0.
> +The default value is 0 (wildcards are enabled).
> .TP
> .BR disable_heartbeat= { 0 | 1 }
> Disables support for the controller's heartbeat check.
> This parameter is used for debugging purposes.
> -The default value is 0, leaving the controller's heartbeat check active.
> +The default value is 0 (the controller's heartbeat check is enabled).
> .TP
> .BR disable_ctrl_shutdown= { 0 | 1 }
> Disables support for shutting down the controller in the
> event of a controller lockup.
> -The default value is 0.
> +The default value is 0 (controller will be shut down).
> .TP
> .BR lockup_action= { none | reboot | panic }
> Specifies the action the driver takes when a controller
> @@ -94,14 +94,12 @@ parameter action
> .TE
> .TP
> .BR expose_ld_first= { 0 | 1 }
> -This option enables support for exposing logical devices to
> -the operating system before physical devices.
> -The default value is 0.
> +This option exposes logical devices to the OS before physical devices.
> +The default value is 0 (physical devices exposed first).
> .TP
> .BR hide_vsep= { 0 | 1 }
> -This option enables disabling exposure of the virtual SEP to the host.
> -This is usually associated with direct attached drives.
> -The default value is 0.
> +This option disables exposure of the virtual SEP to the OS.
> +The default value is 0 (virtual SEP is exposed).
> .SH FILES
> .SS Device nodes
> Logical drives are accessed via the SCSI disk driver
> --
> 2.42.0.158.g94e83dcf5b
>
Attachment:
signature.asc
Description: PGP signature
