[PATCH v3 05/10] smartpqi: update FILES section

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Minor description changes for Device nodes.

Change "Logical drives" to "Disk drives".

Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 man4/smartpqi.4 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/man4/smartpqi.4 b/man4/smartpqi.4
index f04472836210..87f6990f2455 100644
--- a/man4/smartpqi.4
+++ b/man4/smartpqi.4
@@ -115,7 +115,7 @@ for controller ready. The valid range is 0 or 30-1800. The default value
 is 0, which causes the driver to use a timeout of 180 seconds.
 .SH FILES
 .SS Device nodes
-Logical drives are accessed via the SCSI disk driver
+Disk drives are accessed via the SCSI disk driver
 .RI ( sd ),
 tape drives via the SCSI tape driver
 .RI ( st ),
-- 
2.42.0.158.g94e83dcf5b




[Index of Archives]     [Kernel Documentation]     [Netdev]     [Linux Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux