Add in some host level sysfs entries:
enable_stream_detection - Send RAID 5/6 writes down the normal I/O path.
Allow for full-stripe write requests.
ssd_smart_path_enabled - Indicates that our Accelerated I/O path is
enabled. (AIO).
enable_r5_writes - Allow RAID 5 write operations down the AIO path.
enable_r6_writes - Allow RAID 6 write operations down the AIO path.
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
man4/smartpqi.4 | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/man4/smartpqi.4 b/man4/smartpqi.4
index 635b3fa185ab..19708a01f531 100644
--- a/man4/smartpqi.4
+++ b/man4/smartpqi.4
@@ -235,6 +235,63 @@ $ \c
Adaptec
.EE
.in
+.TP
+.IR /sys/class/scsi_host/host*/enable_stream_detection
+The
+.I enable_stream_detection
+attribute is read-write.
+This attribute enables/disables stream detection in the driver.
+Enabling stream detection can improve sequential write performance for ioaccel-enabled volumes. See the
+.BI ssd_smart_path_enabled
+disk attribute section for details on ioaccel-enabled volumes.
+The default value is 1 (stream detection enabled).
+.IP
+Enable example:
+.IP
+.in +4n
+.EX
+$ \c
+.B echo 1 > /sys/class/scsi_host/host1/enable_stream_detection
+.EE
+.in
+.TP
+.IR /sys/class/scsi_host/host*/enable_r5_writes
+The
+.I enable_r5_writes
+attribute is read-write.
+This attribute enables/disables RAID 5 write operations for ioaccel-enabled volumes.
+Enabling can improve sequential write performance. See the
+.BI ssd_smart_path_enabled
+disk attribute section for details on ioaccel-enabled volumes.
+The default value is 1 (RAID 5 writes enabled).
+.IP
+Enable example:
+.IP
+.in +4n
+.EX
+$ \c
+.B echo 1 > /sys/class/scsi_host/host1/enable_r5_writes
+.EE
+.in
+.TP
+.IR /sys/class/scsi_host/host*/enable_r6_writes
+The
+.I enable_r6_writes
+attribute is read-write.
+This attribute enables/disables RAID 6 write operations for ioaccel-enabled volumes.
+Enabling can improve sequential write performance. See the
+.BI ssd_smart_path_enabled
+disk attribute section for details on ioaccel-enabled volumes.
+The default value is 1 (RAID 6 writes enabled).
+.IP
+Enable example:
+.IP
+.in +4n
+.EX
+$ \c
+.B echo 1 > /sys/class/scsi_host/host1/enable_r6_writes
+.EE
+.in
.SS SmartPQI-specific disk attribute files in \f[BI]/sys\fP
In the file specifications below,
.I c
--
2.42.0.158.g94e83dcf5b
