Minor description changes for host attributes. Just some small changes to the host attribute descriptions. Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx> Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx> Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx> Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx> Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx> --- man4/smartpqi.4 | 31 +++++++------------------------ 1 file changed, 7 insertions(+), 24 deletions(-) diff --git a/man4/smartpqi.4 b/man4/smartpqi.4 index 87f6990f2455..165eee6848c3 100644 --- a/man4/smartpqi.4 +++ b/man4/smartpqi.4 @@ -135,29 +135,12 @@ The host attribute is a write-only attribute. Writing to this attribute will cause the driver to scan for new, changed, or removed devices (e.g., hot-plugged tape drives, or newly -configured or deleted logical drives) and notify the SCSI mid-layer of +configured or deleted logical volumes) and notify the SCSI mid-layer of any changes detected. Usually this action is triggered automatically by configuration changes, so the user should not normally have to write to this file. Doing so may be useful when hot-plugging devices such as tape drives or -entire storage boxes containing pre-configured logical drives. -.TP -.IR /sys/class/scsi_host/host * /version -The host -.I version -attribute is a read-only attribute. -This attribute contains the driver version and the controller firmware -version. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/version -driver: 1.1.2\-126 -firmware: 1.29\-112 -.EE +entire storage boxes containing pre-configured logical volumes. .in .TP .IR /sys/class/scsi_host/host * /lockup_action @@ -173,7 +156,7 @@ for an explanation of the .I lockup_action values. .TP -.I /sys/class/scsi_host/host*/driver_version +.IR /sys/class/scsi_host/host*/driver_version The .I driver_version attribute is read-only. @@ -189,7 +172,7 @@ $ \c .EE .in .TP -.I /sys/class/scsi_host/host*/firmware_version +.IR /sys/class/scsi_host/host*/firmware_version The .I firmware_version attribute is read-only. @@ -205,7 +188,7 @@ $ \c .EE .in .TP -.I /sys/class/scsi_host/host*/model +.IR /sys/class/scsi_host/host*/model The .I model attribute is read-only. @@ -221,7 +204,7 @@ $ \c .EE .in .TP -.I /sys/class/scsi_host/host*/serial_number +.IR /sys/class/scsi_host/host*/serial_number The .I serial_number attribute is read-only. @@ -237,7 +220,7 @@ $ \c .EE .in .TP -.I /sys/class/scsi_host/host*/vendor +.IR /sys/class/scsi_host/host*/vendor The .I vendor attribute is read-only. -- 2.42.0.rc2
