On Sun, Dec 11, 2022 at 1:55 PM Alejandro Colomar
<alx.manpages@xxxxxxxxx> wrote:
>
> Hey Zach,
>
> On 12/11/22 22:51, Zach O'Keefe wrote:
> > On Sun, Dec 11, 2022 at 9:59 AM Alejandro Colomar
> > <alx.manpages@xxxxxxxxx> wrote:
> >>
> >> Hi Zach,
> >
> > Hey Alex,
> >
> >> On 10/22/22 00:33, Zach OKeefe wrote:
> >>> From: Zach O'Keefe <zokeefe@xxxxxxxxxx>
> >>>
> >>> Linux 6.1 introduced MADV_COLLAPSE in upstream commit 7d8faaf15545
> >>> ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse") and
> >>> upstream commit 34488399fa08 ("mm/madvise: add file and shmem support to
> >>> MADV_COLLAPSE"). Update the man-pages for madvise(2) and
> >>> process_madvise(2).
> >>>
> >>> Link: https://lore.kernel.org/linux-mm/20220922224046.1143204-1-zokeefe@xxxxxxxxxx/
> >>> Link: https://lore.kernel.org/linux-mm/20220706235936.2197195-1-zokeefe@xxxxxxxxxx/
> >>> Signed-off-by: Zach O'Keefe <zokeefe@xxxxxxxxxx>
> >>
> >> Please see a few comments below.
> >>
> >
> > Thanks for the mail. So, this patch was taken as commit b106cd5bf
> > ("madvise.2: add documentation for MADV_COLLAPSE"). Some of your
> > comments below were
> > applied (I think, by you) as fixes pre-commit. However, there are some
> > new comments (or ones
> > that address the same lines, but in different ways). Is this mail to
> > log ~ what changes were done,
> > or is there anything actionable here on my side?
>
> Ah no, it's just that I had it marked as unread for some reason, so I thought I
> had forgotten to respond (and I forgot that I had applied it). :-)
>
> So, no action required.
>
> Regarding different suggestions, heh, it demonstrates that it's not exactly
> deterministic :P
>
Heh -- no worries :) Thanks for following up!
> Cheers,
>
> Alex
>
> P.S.: Do you know if I have anything missing from you or any of your collegues?
At least on my part, I think you've taken all my patches (with help &
edits -- thank you!). I can't speak for anyone else at Google, however
(though, just a very hasty cross reference between git log and
lore.kernel.org/linux-man seems to indicate patches sent from
*@google.com since man-pages-6.00 have previously made it into
man-pages-6.01, and nothing afterwards).
Have a great rest of your weekend,
Best,
Zach
>
> >
> > Best,
> > Zach
> >
> > Thanks for this.
> >> Cheers,
> >>
> >> Alex
> >>
> >>> ---
> >>> man2/madvise.2 | 90 +++++++++++++++++++++++++++++++++++++++++-
> >>> man2/process_madvise.2 | 10 +++++
> >>> 2 files changed, 98 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/man2/madvise.2 b/man2/madvise.2
> >>> index df3413cc8..b03fc731d 100644
> >>> --- a/man2/madvise.2
> >>> +++ b/man2/madvise.2
> >>> @@ -385,9 +385,10 @@ set (see
> >>> .BR prctl (2) ).
> >>> .IP
> >>> The
> >>> -.B MADV_HUGEPAGE
> >>> +.BR MADV_HUGEPAGE ,
> >>> +.BR MADV_NOHUGEPAGE ,
> >>> and
> >>> -.B MADV_NOHUGEPAGE
> >>> +.B MADV_COLLAPSE
> >>> operations are available only if the kernel was configured with
> >>> .B CONFIG_TRANSPARENT_HUGEPAGE
> >>> and file/shmem memory is only supported if the kernel was configured with
> >>> @@ -400,6 +401,81 @@ and
> >>> .I length
> >>> will not be backed by transparent hugepages.
> >>> .TP
> >>> +.BR MADV_COLLAPSE " (since Linux 6.1)"
> >>> +.\" commit 7d8faaf155454f8798ec56404faca29a82689c77
> >>> +.\" commit 34488399fa08faaf664743fa54b271eb6f9e1321
> >>> +Perform a best-effort synchronous collapse of the native pages mapped by the
> >>
> >> Please use semantic line breaks. In this case, I'd break after "pages".
> >>
> >> man-pages(7):
> >> Use semantic newlines
> >> In the source of a manual page, new sentences should be started on new
> >> lines, long sentences should be split into lines at clause breaks (com‐
> >> mas, semicolons, colons, and so on), and long clauses should be split
> >> at phrase boundaries. This convention, sometimes known as "semantic
> >> newlines", makes it easier to see the effect of patches, which often
> >> operate at the level of individual sentences, clauses, or phrases.
> >>
> >>> +memory range into Transparent Huge Pages (THPs).
> >>> +.B MADV_COLLAPSE
> >>> +operates on the current state of memory of the calling process and makes no
> >>
> >> Here I'd break after "and".
> >>
> >>> +persistent changes or guarantees on how pages will be mapped,
> >>> +constructed,
> >>> +or faulted in the future.
> >>> +.IP
> >>> +.B MADV_COLLAPSE
> >>> +supports private anonymous pages (see
> >>> +.BR mmap (2)),
> >>> +shmem pages,
> >>> +and file-backed pages.
> >>> +See
> >>> +.B MADV_HUGEPAGE
> >>> +for general information on memory requirements for THP.
> >>> +If the range provided spans multiple VMAs,
> >>> +the semantics of the collapse over each VMA is independent from the others.
> >>> +If collapse of a given huge page-aligned/sized region fails,
> >>> +the operation may continue to attempt collapsing the remainder of the
> >>
> >> Break after "collapsing".
> >>
> >>> +specified memory.
> >>> +.B MADV_COLLAPSE
> >>> +will automatically clamp the provided range to be hugepage-aligned.
> >>> +.IP
> >>> +All non-resident pages covered by the range will first be
> >>
> >> Break after "range".
> >>
> >>> +swapped/faulted-in,
> >>> +before being copied onto a freshly allocated hugepage.
> >>> +If the native pages compose the same PTE-mapped hugepage,
> >>> +and are suitably aligned,
> >>> +allocation of a new hugepage may be elided and collapse may happen
> >>
> >> Break before or after "and".
> >>
> >>> +in-place.
> >>> +Unmapped pages will have their data directly initialized to 0 in the new
> >>
> >> Break after "0".
> >>
> >>> +hugepage.
> >>> +However,
> >>> +for every eligible hugepage-aligned/sized region to be collapsed,
> >>> +at least one page must currently be backed by physical memory.
> >>> +.IP
> >>> +.BR MADV_COLLAPSE
> >>
> >> s/BR/B/
> >>
> >>> +is independent of any sysfs
> >>> +(see
> >>> +.BR sysfs (5))
> >>> +setting under
> >>> +.IR /sys/kernel/mm/transparent_hugepage ,
> >>> +both in terms of determining THP eligibility,
> >>> +and allocation semantics.
> >>> +See Linux kernel source file
> >>> +.I Documentation/admin\-guide/mm/transhuge.rst
> >>> +for more information.
> >>> +.BR MADV_COLLAPSE
> >>
> >> s/BR/B/
> >>
> >>> +also ignores
> >>> +.B huge=
> >>> +tmpfs mount when operating on tmpfs files.
> >>> +Allocation for the new hugepage may enter direct reclaim and/or compaction,
> >>> +regardless of VMA flags
> >>> +(though
> >>> +.BR VM_NOHUGEPAGE
> >>
> >> s/BR/B/
> >>
> >>> +is still respected).
> >>> +.IP
> >>> +When the system has multiple NUMA nodes,
> >>> +the hugepage will be allocated from the node providing the most native
> >>
> >> Break after "from".
> >>
> >>> +pages.
> >>> +.IP
> >>> +If all hugepage-sized/aligned regions covered by the provided range were
> >>
> >> Prefer English rather than "/".
> >>
> >>> +either successfully collapsed,
> >>> +or were already PMD-mapped THPs,
> >>> +this operation will be deemed successful.
> >>> +Note that this doesn’t guarantee anything about other possible mappings of
> >>
> >> Break after "about".
> >>
> >>> +the memory.
> >>> +Also note that many failures might have occurred since the operation may
> >>> +continue to collapse in the event collapse of a single hugepage-sized/aligned
> >>
> >> Add some omitted "that" or something that will help readability to
> >> non-native-English readers.
> >>
> >> And break at a better place.
> >>
> >>> +region fails.
> >>> +.TP
> >>> .BR MADV_DONTDUMP " (since Linux 3.4)"
> >>> .\" commit 909af768e88867016f427264ae39d27a57b6a8ed
> >>> .\" commit accb61fe7bb0f5c2a4102239e4981650f9048519
> >>> @@ -619,6 +695,11 @@ A kernel resource was temporarily unavailable.
> >>> .B EBADF
> >>> The map exists, but the area maps something that isn't a file.
> >>> .TP
> >>> +.B EBUSY
> >>> +(for
> >>> +.BR MADV_COLLAPSE )
> >>> +Could not charge hugepage to cgroup: cgroup limit exceeded.
> >>> +.TP
> >>> .B EFAULT
> >>> .I advice
> >>> is
> >>> @@ -716,6 +797,11 @@ maximum resident set size.
> >>> Not enough memory: paging in failed.
> >>> .TP
> >>> .B ENOMEM
> >>> +(for
> >>> +.BR MADV_COLLAPSE )
> >>> +Not enough memory: could not allocate hugepage.
> >>> +.TP
> >>> +.B ENOMEM
> >>> Addresses in the specified range are not currently
> >>> mapped, or are outside the address space of the process.
> >>> .TP
> >>> diff --git a/man2/process_madvise.2 b/man2/process_madvise.2
> >>> index 44d3b94e8..8b0ddccdd 100644
> >>> --- a/man2/process_madvise.2
> >>> +++ b/man2/process_madvise.2
> >>> @@ -73,6 +73,10 @@ argument is one of the following values:
> >>> See
> >>> .BR madvise (2).
> >>> .TP
> >>> +.B MADV_COLLAPSE
> >>> +See
> >>> +.BR madvise (2).
> >>> +.TP
> >>> .B MADV_PAGEOUT
> >>> See
> >>> .BR madvise (2).
> >>> @@ -173,6 +177,12 @@ The caller does not have permission to access the address space of the process
> >>> .TP
> >>> .B ESRCH
> >>> The target process does not exist (i.e., it has terminated and been waited on).
> >>> +.PP
> >>> +See
> >>> +.BR madvise (2)
> >>> +for
> >>> +.IR advice -specific
> >>> +errors.
> >>> .SH VERSIONS
> >>> This system call first appeared in Linux 5.10.
> >>> .\" commit ecb8ac8b1f146915aa6b96449b66dd48984caacc
> >>
> >> --
> >> <http://www.alejandro-colomar.es/>
>
> --
> <http://www.alejandro-colomar.es/>
