[PATCH 04/15] ioctl_tty.2: Add example how to get or set baudrate on the serial port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pali Rohár <pali@xxxxxxxxxx>

Setting custom baudrate for which is not defined Bnnn constant is possible
via BOTHER flag and then filling speed in c_ospeed and c_ispeed fields.

These two fields are either in struct termios or struct termios2. Former
belongs to TCGETS/TCSETS ioctls, latter to TCGETS2/TCSETS2 ioctls.

BOTHER flag with these two fields and new struct termios2 is not supported
by older versions of include header files.

Some architectures (e.g. amd64) provide both struct termios and struct
termios2, but c_ospeed and c_ispeed are only in struct termios2.

Some other architectures (e.g. alpha) provide both struct termios and struct
termios2 and both have c_ospeed and c_ispeed fields.

And some other architectures (e.g. powerpc) provide only struct termios
(no struct termios2) and it has c_ospeed and c_ispeed fields.

So basically to support all architectures it is needed to use
struct termios2 when TCGETS2/TCSETS2 is supported. Otherwise it is needed
to use struct termios with TCGETS/TCSETS (case for e.g. powerpc).

Setting input baudrate is done via IBSHIFT macro.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Signed-off-by: Alejandro Colomar <alx.manpages@xxxxxxxxx>
---
 man2/ioctl_tty.2 | 100 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/man2/ioctl_tty.2 b/man2/ioctl_tty.2
index 186011ee7..fd1f3dc25 100644
--- a/man2/ioctl_tty.2
+++ b/man2/ioctl_tty.2
@@ -755,6 +755,106 @@ main(void)
     close(fd);
 }
 .EE
+.PP
+Get or set arbitrary baudrate on the serial port.
+.PP
+.EX
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <asm/termbits.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+int
+main(int argc, char *argv[])
+{
+#ifndef BOTHER
+    fprintf(stderr, "BOTHER is unsupported\en");
+    /* Program may fallback to TCGETS/TCSETS with Bnnn constants */
+    exit(EXIT_FAILURE);
+#else
+    /* Declare tio structure, its type depends on supported ioctl */
+#ifdef TCGETS2
+    struct termios2 tio;
+#else
+    struct termios tio;
+#endif
+    int fd, rc;
+
+    if (argc != 2 && argc != 3 && argc != 4) {
+        fprintf(stderr, "Usage: %s device [output [input] ]\en", argv[0]);
+        exit(EXIT_FAILURE);
+    }
+
+    fd = open(argv[1], O_RDWR | O_NONBLOCK | O_NOCTTY);
+    if (fd < 0) {
+        perror("open");
+        exit(EXIT_FAILURE);
+    }
+
+    /* Get the current serial port settings via supported ioctl */
+#ifdef TCGETS2
+    rc = ioctl(fd, TCGETS2, &tio);
+#else
+    rc = ioctl(fd, TCGETS, &tio);
+#endif
+    if (rc) {
+        perror("TCGETS");
+        close(fd);
+        exit(EXIT_FAILURE);
+    }
+
+    /* Change baud rate when more arguments were provided */
+    if (argc == 3 || argc == 4) {
+        /* Clear the current output baud rate and fill a new value */
+        tio.c_cflag &= ~CBAUD;
+        tio.c_cflag |= BOTHER;
+        tio.c_ospeed = atoi(argv[2]);
+
+        /* Clear the current input baud rate and fill a new value */
+        tio.c_cflag &= ~(CBAUD << IBSHIFT);
+        tio.c_cflag |= BOTHER << IBSHIFT;
+        /* When 4th argument is not provided reuse output baud rate */
+        tio.c_ispeed = (argc == 4) ? atoi(argv[3]) : atoi(argv[2]);
+
+        /* Set new serial port settings via supported ioctl */
+#ifdef TCSETS2
+        rc = ioctl(fd, TCSETS2, &tio);
+#else
+        rc = ioctl(fd, TCSETS, &tio);
+#endif
+        if (rc) {
+            perror("TCSETS");
+            close(fd);
+            exit(EXIT_FAILURE);
+        }
+
+        /* And get new values which were really configured */
+#ifdef TCGETS2
+        rc = ioctl(fd, TCGETS2, &tio);
+#else
+        rc = ioctl(fd, TCGETS, &tio);
+#endif
+        if (rc) {
+            perror("TCGETS");
+            close(fd);
+            exit(EXIT_FAILURE);
+        }
+    }
+
+    close(fd);
+
+    printf("output baud rate: %u\en", tio.c_ospeed);
+    printf("input baud rate: %u\en", tio.c_ispeed);
+
+    exit(EXIT_SUCCESS);
+#endif
+}
+.EE
 .SH SEE ALSO
 .BR ldattach (1),
 .BR ioctl (2),
-- 
2.33.0




[Index of Archives]     [Kernel Documentation]     [Netdev]     [Linux Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux