[PATCH bpf-next v4 10/10] bpf: update bpf.h uapi header for tools

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update tools/include/uapi/linux/bpf.h file in order to reflect the
changes for BPF helper functions documentation introduced in previous
commits.

Signed-off-by: Quentin Monnet <quentin.monnet@xxxxxxxxxxxxx>
---
 tools/include/uapi/linux/bpf.h | 1776 +++++++++++++++++++++++++++++++---------
 1 file changed, 1380 insertions(+), 396 deletions(-)

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index e6679393b687..3b91e22f68c1 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -377,412 +377,1396 @@ union bpf_attr {
 	};
 } __attribute__((aligned(8)));
 
-/* BPF helper function descriptions:
- *
- * void *bpf_map_lookup_elem(&map, &key)
- *     Return: Map value or NULL
- *
- * int bpf_map_update_elem(&map, &key, &value, flags)
- *     Return: 0 on success or negative error
- *
- * int bpf_map_delete_elem(&map, &key)
- *     Return: 0 on success or negative error
- *
- * int bpf_probe_read(void *dst, int size, void *src)
- *     Return: 0 on success or negative error
+/* The description below is an attempt at providing documentation to eBPF
+ * developers about the multiple available eBPF helper functions. It can be
+ * parsed and used to produce a manual page. The workflow is the following,
+ * and requires the rst2man utility:
+ *
+ *     $ ./scripts/bpf_helpers_doc.py \
+ *             --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
+ *     $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
+ *     $ man /tmp/bpf-helpers.7
+ *
+ * Note that in order to produce this external documentation, some RST
+ * formatting is used in the descriptions to get "bold" and "italics" in
+ * manual pages. Also note that the few trailing white spaces are
+ * intentional, removing them would break paragraphs for rst2man.
+ *
+ * Start of BPF helper function descriptions:
+ *
+ * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+ * 	Description
+ * 		Perform a lookup in *map* for an entry associated to *key*.
+ * 	Return
+ * 		Map value associated to *key*, or **NULL** if no entry was
+ * 		found.
+ *
+ * int bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+ * 	Description
+ * 		Add or update the value of the entry associated to *key* in
+ * 		*map* with *value*. *flags* is one of:
+ *
+ * 		**BPF_NOEXIST**
+ * 			The entry for *key* must not exist in the map.
+ * 		**BPF_EXIST**
+ * 			The entry for *key* must already exist in the map.
+ * 		**BPF_ANY**
+ * 			No condition on the existence of the entry for *key*.
+ *
+ * 		Flag value **BPF_NOEXIST** cannot be used for maps of types
+ * 		**BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY**  (all
+ * 		elements always exist), the helper would return an error.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_map_delete_elem(struct bpf_map *map, const void *key)
+ * 	Description
+ * 		Delete entry with *key* from *map*.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_probe_read(void *dst, u32 size, const void *src)
+ * 	Description
+ * 		For tracing programs, safely attempt to read *size* bytes from
+ * 		address *src* and store the data in *dst*.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
  *
  * u64 bpf_ktime_get_ns(void)
- *     Return: current ktime
- *
- * int bpf_trace_printk(const char *fmt, int fmt_size, ...)
- *     Return: length of buffer written or negative error
- *
- * u32 bpf_prandom_u32(void)
- *     Return: random value
- *
- * u32 bpf_raw_smp_processor_id(void)
- *     Return: SMP processor ID
- *
- * int bpf_skb_store_bytes(skb, offset, from, len, flags)
- *     store bytes into packet
- *     @skb: pointer to skb
- *     @offset: offset within packet from skb->mac_header
- *     @from: pointer where to copy bytes from
- *     @len: number of bytes to store into packet
- *     @flags: bit 0 - if true, recompute skb->csum
- *             other bits - reserved
- *     Return: 0 on success or negative error
- *
- * int bpf_l3_csum_replace(skb, offset, from, to, flags)
- *     recompute IP checksum
- *     @skb: pointer to skb
- *     @offset: offset within packet where IP checksum is located
- *     @from: old value of header field
- *     @to: new value of header field
- *     @flags: bits 0-3 - size of header field
- *             other bits - reserved
- *     Return: 0 on success or negative error
- *
- * int bpf_l4_csum_replace(skb, offset, from, to, flags)
- *     recompute TCP/UDP checksum
- *     @skb: pointer to skb
- *     @offset: offset within packet where TCP/UDP checksum is located
- *     @from: old value of header field
- *     @to: new value of header field
- *     @flags: bits 0-3 - size of header field
- *             bit 4 - is pseudo header
- *             other bits - reserved
- *     Return: 0 on success or negative error
- *
- * int bpf_tail_call(ctx, prog_array_map, index)
- *     jump into another BPF program
- *     @ctx: context pointer passed to next program
- *     @prog_array_map: pointer to map which type is BPF_MAP_TYPE_PROG_ARRAY
- *     @index: 32-bit index inside array that selects specific program to run
- *     Return: 0 on success or negative error
- *
- * int bpf_clone_redirect(skb, ifindex, flags)
- *     redirect to another netdev
- *     @skb: pointer to skb
- *     @ifindex: ifindex of the net device
- *     @flags: bit 0 - if set, redirect to ingress instead of egress
- *             other bits - reserved
- *     Return: 0 on success or negative error
+ * 	Description
+ * 		Return the time elapsed since system boot, in nanoseconds.
+ * 	Return
+ * 		Current *ktime*.
+ *
+ * int bpf_trace_printk(const char *fmt, u32 fmt_size, ...)
+ * 	Description
+ * 		This helper is a "printk()-like" facility for debugging. It
+ * 		prints a message defined by format *fmt* (of size *fmt_size*)
+ * 		to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
+ * 		available. It can take up to three additional **u64**
+ * 		arguments (as an eBPF helpers, the total number of arguments is
+ * 		limited to five).
+ *
+ * 		Each time the helper is called, it appends a line to the trace.
+ * 		The format of the trace is customizable, and the exact output
+ * 		one will get depends on the options set in
+ * 		*\/sys/kernel/debug/tracing/trace_options* (see also the
+ * 		*README* file under the same directory). However, it usually
+ * 		defaults to something like:
+ *
+ * 		::
+ *
+ * 			telnet-470   [001] .N.. 419421.045894: 0x00000001: <formatted msg>
+ *
+ * 		In the above:
+ *
+ * 			* ``telnet`` is the name of the current task.
+ * 			* ``470`` is the PID of the current task.
+ * 			* ``001`` is the CPU number on which the task is
+ * 			  running.
+ * 			* In ``.N..``, each character refers to a set of
+ * 			  options (whether irqs are enabled, scheduling
+ * 			  options, whether hard/softirqs are running, level of
+ * 			  preempt_disabled respectively). **N** means that
+ * 			  **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
+ * 			  are set.
+ * 			* ``419421.045894`` is a timestamp.
+ * 			* ``0x00000001`` is a fake value used by BPF for the
+ * 			  instruction pointer register.
+ * 			* ``<formatted msg>`` is the message formatted with
+ * 			  *fmt*.
+ *
+ * 		The conversion specifiers supported by *fmt* are similar, but
+ * 		more limited than for printk(). They are **%d**, **%i**,
+ * 		**%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
+ * 		**%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
+ * 		of field, padding with zeroes, etc.) is available, and the
+ * 		helper will return **-EINVAL** (but print nothing) if it
+ * 		encounters an unknown specifier.
+ *
+ * 		Also, note that **bpf_trace_printk**\ () is slow, and should
+ * 		only be used for debugging purposes. For this reason, a notice
+ * 		bloc (spanning several lines) is printed to kernel logs and
+ * 		states that the helper should not be used "for production use"
+ * 		the first time this helper is used (or more precisely, when
+ * 		**trace_printk**\ () buffers are allocated). For passing values
+ * 		to user space, perf events should be preferred.
+ * 	Return
+ * 		The number of bytes written to the buffer, or a negative error
+ * 		in case of failure.
+ *
+ * u32 bpf_get_prandom_u32(void)
+ * 	Description
+ * 		Get a pseudo-random number.
+ *
+ * 		From a security point of view, this helper uses its own
+ * 		pseudo-random internal state, and cannot be used to infer the
+ * 		seed of other random functions in the kernel. However, it is
+ * 		essential to note that the generator used by the helper is not
+ * 		cryptographically secure.
+ * 	Return
+ * 		A random 32-bit unsigned value.
+ *
+ * u32 bpf_get_smp_processor_id(void)
+ * 	Description
+ * 		Get the SMP (symmetric multiprocessing) processor id. Note that
+ * 		all programs run with preemption disabled, which means that the
+ * 		SMP processor id is stable during all the execution of the
+ * 		program.
+ * 	Return
+ * 		The SMP id of the processor running the program.
+ *
+ * int bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags)
+ * 	Description
+ * 		Store *len* bytes from address *from* into the packet
+ * 		associated to *skb*, at *offset*. *flags* are a combination of
+ * 		**BPF_F_RECOMPUTE_CSUM** (automatically recompute the
+ * 		checksum for the packet after storing the bytes) and
+ * 		**BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
+ * 		**->swhash** and *skb*\ **->l4hash** to 0).
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size)
+ * 	Description
+ * 		Recompute the layer 3 (e.g. IP) checksum for the packet
+ * 		associated to *skb*. Computation is incremental, so the helper
+ * 		must know the former value of the header field that was
+ * 		modified (*from*), the new value of this field (*to*), and the
+ * 		number of bytes (2 or 4) for this field, stored in *size*.
+ * 		Alternatively, it is possible to store the difference between
+ * 		the previous and the new values of the header field in *to*, by
+ * 		setting *from* and *size* to 0. For both methods, *offset*
+ * 		indicates the location of the IP checksum within the packet.
+ *
+ * 		This helper works in combination with **bpf_csum_diff**\ (),
+ * 		which does not update the checksum in-place, but offers more
+ * 		flexibility and can handle sizes larger than 2 or 4 for the
+ * 		checksum to update.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags)
+ * 	Description
+ * 		Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
+ * 		packet associated to *skb*. Computation is incremental, so the
+ * 		helper must know the former value of the header field that was
+ * 		modified (*from*), the new value of this field (*to*), and the
+ * 		number of bytes (2 or 4) for this field, stored on the lowest
+ * 		four bits of *flags*. Alternatively, it is possible to store
+ * 		the difference between the previous and the new values of the
+ * 		header field in *to*, by setting *from* and the four lowest
+ * 		bits of *flags* to 0. For both methods, *offset* indicates the
+ * 		location of the IP checksum within the packet. In addition to
+ * 		the size of the field, *flags* can be added (bitwise OR) actual
+ * 		flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
+ * 		untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
+ * 		for updates resulting in a null checksum the value is set to
+ * 		**CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
+ * 		the checksum is to be computed against a pseudo-header.
+ *
+ * 		This helper works in combination with **bpf_csum_diff**\ (),
+ * 		which does not update the checksum in-place, but offers more
+ * 		flexibility and can handle sizes larger than 2 or 4 for the
+ * 		checksum to update.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index)
+ * 	Description
+ * 		This special helper is used to trigger a "tail call", or in
+ * 		other words, to jump into another eBPF program. The same stack
+ * 		frame is used (but values on stack and in registers for the
+ * 		caller are not accessible to the callee). This mechanism allows
+ * 		for program chaining, either for raising the maximum number of
+ * 		available eBPF instructions, or to execute given programs in
+ * 		conditional blocks. For security reasons, there is an upper
+ * 		limit to the number of successive tail calls that can be
+ * 		performed.
+ *
+ * 		Upon call of this helper, the program attempts to jump into a
+ * 		program referenced at index *index* in *prog_array_map*, a
+ * 		special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
+ * 		*ctx*, a pointer to the context.
+ *
+ * 		If the call succeeds, the kernel immediately runs the first
+ * 		instruction of the new program. This is not a function call,
+ * 		and it never returns to the previous program. If the call
+ * 		fails, then the helper has no effect, and the caller continues
+ * 		to run its subsequent instructions. A call can fail if the
+ * 		destination program for the jump does not exist (i.e. *index*
+ * 		is superior to the number of entries in *prog_array_map*), or
+ * 		if the maximum number of tail calls has been reached for this
+ * 		chain of programs. This limit is defined in the kernel by the
+ * 		macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
+ * 		which is currently set to 32.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags)
+ * 	Description
+ * 		Clone and redirect the packet associated to *skb* to another
+ * 		net device of index *ifindex*. Both ingress and egress
+ * 		interfaces can be used for redirection. The **BPF_F_INGRESS**
+ * 		value in *flags* is used to make the distinction (ingress path
+ * 		is selected if the flag is present, egress path otherwise).
+ * 		This is the only flag supported for now.
+ *
+ * 		In comparison with **bpf_redirect**\ () helper,
+ * 		**bpf_clone_redirect**\ () has the associated cost of
+ * 		duplicating the packet buffer, but this can be executed out of
+ * 		the eBPF program. Conversely, **bpf_redirect**\ () is more
+ * 		efficient, but it is handled through an action code where the
+ * 		redirection happens only after the eBPF program has returned.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
  *
  * u64 bpf_get_current_pid_tgid(void)
- *     Return: current->tgid << 32 | current->pid
+ * 	Return
+ * 		A 64-bit integer containing the current tgid and pid, and
+ * 		created as such:
+ * 		*current_task*\ **->tgid << 32 \|**
+ * 		*current_task*\ **->pid**.
  *
  * u64 bpf_get_current_uid_gid(void)
- *     Return: current_gid << 32 | current_uid
- *
- * int bpf_get_current_comm(char *buf, int size_of_buf)
- *     stores current->comm into buf
- *     Return: 0 on success or negative error
- *
- * u32 bpf_get_cgroup_classid(skb)
- *     retrieve a proc's classid
- *     @skb: pointer to skb
- *     Return: classid if != 0
- *
- * int bpf_skb_vlan_push(skb, vlan_proto, vlan_tci)
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_vlan_pop(skb)
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_get_tunnel_key(skb, key, size, flags)
- * int bpf_skb_set_tunnel_key(skb, key, size, flags)
- *     retrieve or populate tunnel metadata
- *     @skb: pointer to skb
- *     @key: pointer to 'struct bpf_tunnel_key'
- *     @size: size of 'struct bpf_tunnel_key'
- *     @flags: room for future extensions
- *     Return: 0 on success or negative error
- *
- * u64 bpf_perf_event_read(map, flags)
- *     read perf event counter value
- *     @map: pointer to perf_event_array map
- *     @flags: index of event in the map or bitmask flags
- *     Return: value of perf event counter read or error code
- *
- * int bpf_redirect(ifindex, flags)
- *     redirect to another netdev
- *     @ifindex: ifindex of the net device
- *     @flags:
- *	  cls_bpf:
- *          bit 0 - if set, redirect to ingress instead of egress
- *          other bits - reserved
- *	  xdp_bpf:
- *	    all bits - reserved
- *     Return: cls_bpf: TC_ACT_REDIRECT on success or TC_ACT_SHOT on error
- *	       xdp_bfp: XDP_REDIRECT on success or XDP_ABORT on error
- * int bpf_redirect_map(map, key, flags)
- *     redirect to endpoint in map
- *     @map: pointer to dev map
- *     @key: index in map to lookup
- *     @flags: --
- *     Return: XDP_REDIRECT on success or XDP_ABORT on error
- *
- * u32 bpf_get_route_realm(skb)
- *     retrieve a dst's tclassid
- *     @skb: pointer to skb
- *     Return: realm if != 0
- *
- * int bpf_perf_event_output(ctx, map, flags, data, size)
- *     output perf raw sample
- *     @ctx: struct pt_regs*
- *     @map: pointer to perf_event_array map
- *     @flags: index of event in the map or bitmask flags
- *     @data: data on stack to be output as raw data
- *     @size: size of data
- *     Return: 0 on success or negative error
- *
- * int bpf_get_stackid(ctx, map, flags)
- *     walk user or kernel stack and return id
- *     @ctx: struct pt_regs*
- *     @map: pointer to stack_trace map
- *     @flags: bits 0-7 - numer of stack frames to skip
- *             bit 8 - collect user stack instead of kernel
- *             bit 9 - compare stacks by hash only
- *             bit 10 - if two different stacks hash into the same stackid
- *                      discard old
- *             other bits - reserved
- *     Return: >= 0 stackid on success or negative error
- *
- * s64 bpf_csum_diff(from, from_size, to, to_size, seed)
- *     calculate csum diff
- *     @from: raw from buffer
- *     @from_size: length of from buffer
- *     @to: raw to buffer
- *     @to_size: length of to buffer
- *     @seed: optional seed
- *     Return: csum result or negative error code
- *
- * int bpf_skb_get_tunnel_opt(skb, opt, size)
- *     retrieve tunnel options metadata
- *     @skb: pointer to skb
- *     @opt: pointer to raw tunnel option data
- *     @size: size of @opt
- *     Return: option size
- *
- * int bpf_skb_set_tunnel_opt(skb, opt, size)
- *     populate tunnel options metadata
- *     @skb: pointer to skb
- *     @opt: pointer to raw tunnel option data
- *     @size: size of @opt
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_change_proto(skb, proto, flags)
- *     Change protocol of the skb. Currently supported is v4 -> v6,
- *     v6 -> v4 transitions. The helper will also resize the skb. eBPF
- *     program is expected to fill the new headers via skb_store_bytes
- *     and lX_csum_replace.
- *     @skb: pointer to skb
- *     @proto: new skb->protocol type
- *     @flags: reserved
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_change_type(skb, type)
- *     Change packet type of skb.
- *     @skb: pointer to skb
- *     @type: new skb->pkt_type type
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_under_cgroup(skb, map, index)
- *     Check cgroup2 membership of skb
- *     @skb: pointer to skb
- *     @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
- *     @index: index of the cgroup in the bpf_map
- *     Return:
- *       == 0 skb failed the cgroup2 descendant test
- *       == 1 skb succeeded the cgroup2 descendant test
- *        < 0 error
- *
- * u32 bpf_get_hash_recalc(skb)
- *     Retrieve and possibly recalculate skb->hash.
- *     @skb: pointer to skb
- *     Return: hash
+ * 	Return
+ * 		A 64-bit integer containing the current GID and UID, and
+ * 		created as such: *current_gid* **<< 32 \|** *current_uid*.
+ *
+ * int bpf_get_current_comm(char *buf, u32 size_of_buf)
+ * 	Description
+ * 		Copy the **comm** attribute of the current task into *buf* of
+ * 		*size_of_buf*. The **comm** attribute contains the name of
+ * 		the executable (excluding the path) for the current task. The
+ * 		*size_of_buf* must be strictly positive. On success, the
+ * 		helper makes sure that the *buf* is NUL-terminated. On failure,
+ * 		it is filled with zeroes.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u32 bpf_get_cgroup_classid(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the classid for the current task, i.e. for the net_cls
+ * 		cgroup to which *skb* belongs.
+ *
+ * 		This helper can be used on TC egress path, but not on ingress.
+ *
+ * 		The net_cls cgroup provides an interface to tag network packets
+ * 		based on a user-provided identifier for all traffic coming from
+ * 		the tasks belonging to the related cgroup. See also the related
+ * 		kernel documentation, available from the Linux sources in file
+ * 		*Documentation/cgroup-v1/net_cls.txt*.
+ *
+ * 		The Linux kernel has two versions for cgroups: there are
+ * 		cgroups v1 and cgroups v2. Both are available to users, who can
+ * 		use a mixture of them, but note that the net_cls cgroup is for
+ * 		cgroup v1 only. This makes it incompatible with BPF programs
+ * 		run on cgroups, which is a cgroup-v2-only feature (a socket can
+ * 		only hold data for one version of cgroups at a time).
+ *
+ * 		This helper is only available is the kernel was compiled with
+ * 		the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
+ * 		"**y**" or to "**m**".
+ * 	Return
+ * 		The classid, or 0 for the default unconfigured classid.
+ *
+ * int bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
+ * 	Description
+ * 		Push a *vlan_tci* (VLAN tag control information) of protocol
+ * 		*vlan_proto* to the packet associated to *skb*, then update
+ * 		the checksum. Note that if *vlan_proto* is different from
+ * 		**ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
+ * 		be **ETH_P_8021Q**.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_vlan_pop(struct sk_buff *skb)
+ * 	Description
+ * 		Pop a VLAN header from the packet associated to *skb*.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
+ * 	Description
+ * 		Get tunnel metadata. This helper takes a pointer *key* to an
+ * 		empty **struct bpf_tunnel_key** of **size**, that will be
+ * 		filled with tunnel metadata for the packet associated to *skb*.
+ * 		The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
+ * 		indicates that the tunnel is based on IPv6 protocol instead of
+ * 		IPv4.
+ *
+ * 		The **struct bpf_tunnel_key** is an object that generalizes the
+ * 		principal parameters used by various tunneling protocols into a
+ * 		single struct. This way, it can be used to easily make a
+ * 		decision based on the contents of the encapsulation header,
+ * 		"summarized" in this struct. In particular, it holds the IP
+ * 		address of the remote end (IPv4 or IPv6, depending on the case)
+ * 		in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
+ * 		this struct exposes the *key*\ **->tunnel_id**, which is
+ * 		generally mapped to a VNI (Virtual Network Identifier), making
+ * 		it programmable together with the **bpf_skb_set_tunnel_key**\
+ * 		() helper.
+ *
+ * 		Let's imagine that the following code is part of a program
+ * 		attached to the TC ingress interface, on one end of a GRE
+ * 		tunnel, and is supposed to filter out all messages coming from
+ * 		remote ends with IPv4 address other than 10.0.0.1:
+ *
+ * 		::
+ *
+ * 			int ret;
+ * 			struct bpf_tunnel_key key = {};
+ * 			
+ * 			ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
+ * 			if (ret < 0)
+ * 				return TC_ACT_SHOT;	// drop packet
+ * 			
+ * 			if (key.remote_ipv4 != 0x0a000001)
+ * 				return TC_ACT_SHOT;	// drop packet
+ * 			
+ * 			return TC_ACT_OK;		// accept packet
+ *
+ * 		This interface can also be used with all encapsulation devices
+ * 		that can operate in "collect metadata" mode: instead of having
+ * 		one network device per specific configuration, the "collect
+ * 		metadata" mode only requires a single device where the
+ * 		configuration can be extracted from this helper.
+ *
+ * 		This can be used together with various tunnels such as VXLan,
+ * 		Geneve, GRE or IP in IP (IPIP).
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
+ * 	Description
+ * 		Populate tunnel metadata for packet associated to *skb.* The
+ * 		tunnel metadata is set to the contents of *key*, of *size*. The
+ * 		*flags* can be set to a combination of the following values:
+ *
+ * 		**BPF_F_TUNINFO_IPV6**
+ * 			Indicate that the tunnel is based on IPv6 protocol
+ * 			instead of IPv4.
+ * 		**BPF_F_ZERO_CSUM_TX**
+ * 			For IPv4 packets, add a flag to tunnel metadata
+ * 			indicating that checksum computation should be skipped
+ * 			and checksum set to zeroes.
+ * 		**BPF_F_DONT_FRAGMENT**
+ * 			Add a flag to tunnel metadata indicating that the
+ * 			packet should not be fragmented.
+ * 		**BPF_F_SEQ_NUMBER**
+ * 			Add a flag to tunnel metadata indicating that a
+ * 			sequence number should be added to tunnel header before
+ * 			sending the packet. This flag was added for GRE
+ * 			encapsulation, but might be used with other protocols
+ * 			as well in the future.
+ *
+ * 		Here is a typical usage on the transmit path:
+ *
+ * 		::
+ *
+ * 			struct bpf_tunnel_key key;
+ * 			     populate key ...
+ * 			bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
+ * 			bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
+ *
+ * 		See also the description of the **bpf_skb_get_tunnel_key**\ ()
+ * 		helper for additional information.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags)
+ * 	Description
+ * 		Read the value of a perf event counter. This helper relies on a
+ * 		*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
+ * 		the perf event counter is selected when *map* is updated with
+ * 		perf event file descriptors. The *map* is an array whose size
+ * 		is the number of available CPUs, and each cell contains a value
+ * 		relative to one CPU. The value to retrieve is indicated by
+ * 		*flags*, that contains the index of the CPU to look up, masked
+ * 		with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * 		**BPF_F_CURRENT_CPU** to indicate that the value for the
+ * 		current CPU should be retrieved.
+ *
+ * 		Note that before Linux 4.13, only hardware perf event can be
+ * 		retrieved.
+ *
+ * 		Also, be aware that the newer helper
+ * 		**bpf_perf_event_read_value**\ () is recommended over
+ * 		**bpf_perf_event_read*\ () in general. The latter has some ABI
+ * 		quirks where error and counter value are used as a return code
+ * 		(which is wrong to do since ranges may overlap). This issue is
+ * 		fixed with bpf_perf_event_read_value(), which at the same time
+ * 		provides more features over the **bpf_perf_event_read**\ ()
+ * 		interface. Please refer to the description of
+ * 		**bpf_perf_event_read_value**\ () for details.
+ * 	Return
+ * 		The value of the perf event counter read from the map, or a
+ * 		negative error code in case of failure.
+ *
+ * int bpf_redirect(u32 ifindex, u64 flags)
+ * 	Description
+ * 		Redirect the packet to another net device of index *ifindex*.
+ * 		This helper is somewhat similar to **bpf_clone_redirect**\
+ * 		(), except that the packet is not cloned, which provides
+ * 		increased performance.
+ *
+ * 		Except for XDP, both ingress and egress interfaces can be used
+ * 		for redirection. The **BPF_F_INGRESS** value in *flags* is used
+ * 		to make the distinction (ingress path is selected if the flag
+ * 		is present, egress path otherwise). Currently, XDP only
+ * 		supports redirection to the egress interface, and accepts no
+ * 		flag at all.
+ *
+ * 		The same effect can be attained with the more generic
+ * 		**bpf_redirect_map**\ (), which requires specific maps to be
+ * 		used but offers better performance.
+ * 	Return
+ * 		For XDP, the helper returns **XDP_REDIRECT** on success or
+ * 		**XDP_ABORTED** on error. For other program types, the values
+ * 		are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
+ * 		error.
+ *
+ * u32 bpf_get_route_realm(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the realm or the route, that is to say the
+ * 		**tclassid** field of the destination for the *skb*. The
+ * 		indentifier retrieved is a user-provided tag, similar to the
+ * 		one used with the net_cls cgroup (see description for
+ * 		**bpf_get_cgroup_classid**\ () helper), but here this tag is
+ * 		held by a route (a destination entry), not by a task.
+ *
+ * 		Retrieving this identifier works with the clsact TC egress hook
+ * 		(see also **tc-bpf(8)**), or alternatively on conventional
+ * 		classful egress qdiscs, but not on TC ingress path. In case of
+ * 		clsact TC egress hook, this has the advantage that, internally,
+ * 		the destination entry has not been dropped yet in the transmit
+ * 		path. Therefore, the destination entry does not need to be
+ * 		artificially held via **netif_keep_dst**\ () for a classful
+ * 		qdisc until the *skb* is freed.
+ *
+ * 		This helper is available only if the kernel was compiled with
+ * 		**CONFIG_IP_ROUTE_CLASSID** configuration option.
+ * 	Return
+ * 		The realm of the route for the packet associated to *skb*, or 0
+ * 		if none was found.
+ *
+ * int bpf_perf_event_output(struct pt_reg *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
+ * 	Description
+ * 		Write raw *data* blob into a special BPF perf event held by
+ * 		*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
+ * 		event must have the following attributes: **PERF_SAMPLE_RAW**
+ * 		as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
+ * 		**PERF_COUNT_SW_BPF_OUTPUT** as **config**.
+ *
+ * 		The *flags* are used to indicate the index in *map* for which
+ * 		the value must be put, masked with **BPF_F_INDEX_MASK**.
+ * 		Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
+ * 		to indicate that the index of the current CPU core should be
+ * 		used.
+ *
+ * 		The value to write, of *size*, is passed through eBPF stack and
+ * 		pointed by *data*.
+ *
+ * 		The context of the program *ctx* needs also be passed to the
+ * 		helper.
+ *
+ * 		On user space, a program willing to read the values needs to
+ * 		call **perf_event_open**\ () on the perf event (either for
+ * 		one or for all CPUs) and to store the file descriptor into the
+ * 		*map*. This must be done before the eBPF program can send data
+ * 		into it. An example is available in file
+ * 		*samples/bpf/trace_output_user.c* in the Linux kernel source
+ * 		tree (the eBPF program counterpart is in
+ * 		*samples/bpf/trace_output_kern.c*).
+ *
+ * 		**bpf_perf_event_output**\ () achieves better performance
+ * 		than **bpf_trace_printk**\ () for sharing data with user
+ * 		space, and is much better suitable for streaming data from eBPF
+ * 		programs.
+ *
+ * 		Note that this helper is not restricted to tracing use cases
+ * 		and can be used with programs attached to TC or XDP as well,
+ * 		where it allows for passing data to user space listeners. Data
+ * 		can be:
+ *
+ * 		* Only custom structs,
+ * 		* Only the packet payload, or
+ * 		* A combination of both.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len)
+ * 	Description
+ * 		This helper was provided as an easy way to load data from a
+ * 		packet. It can be used to load *len* bytes from *offset* from
+ * 		the packet associated to *skb*, into the buffer pointed by
+ * 		*to*.
+ *
+ * 		Since Linux 4.7, usage of this helper has mostly been replaced
+ * 		by "direct packet access", enabling packet data to be
+ * 		manipulated with *skb*\ **->data** and *skb*\ **->data_end**
+ * 		pointing respectively to the first byte of packet data and to
+ * 		the byte after the last byte of packet data. However, it
+ * 		remains useful if one wishes to read large quantities of data
+ * 		at once from a packet into the eBPF stack.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_get_stackid(struct pt_reg *ctx, struct bpf_map *map, u64 flags)
+ * 	Description
+ * 		Walk a user or a kernel stack and return its id. To achieve
+ * 		this, the helper needs *ctx*, which is a pointer to the context
+ * 		on which the tracing program is executed, and a pointer to a
+ * 		*map* of type **BPF_MAP_TYPE_STACK_TRACE**.
+ *
+ * 		The last argument, *flags*, holds the number of stack frames to
+ * 		skip (from 0 to 255), masked with
+ * 		**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
+ * 		a combination of the following flags:
+ *
+ * 		**BPF_F_USER_STACK**
+ * 			Collect a user space stack instead of a kernel stack.
+ * 		**BPF_F_FAST_STACK_CMP**
+ * 			Compare stacks by hash only.
+ * 		**BPF_F_REUSE_STACKID**
+ * 			If two different stacks hash into the same *stackid*,
+ * 			discard the old one.
+ *
+ * 		The stack id retrieved is a 32 bit long integer handle which
+ * 		can be further combined with other data (including other stack
+ * 		ids) and used as a key into maps. This can be useful for
+ * 		generating a variety of graphs (such as flame graphs or off-cpu
+ * 		graphs).
+ *
+ * 		For walking a stack, this helper is an improvement over
+ * 		**bpf_probe_read**\ (), which can be used with unrolled loops
+ * 		but is not efficient and consumes a lot of eBPF instructions.
+ * 		Instead, **bpf_get_stackid**\ () can collect up to
+ * 		**PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
+ * 		this limit can be controlled with the **sysctl** program, and
+ * 		that it should be manually increased in order to profile long
+ * 		user stacks (such as stacks for Java programs). To do so, use:
+ *
+ * 		::
+ *
+ * 			# sysctl kernel.perf_event_max_stack=<new value>
+ *
+ * 	Return
+ * 		The positive or null stack id on success, or a negative error
+ * 		in case of failure.
+ *
+ * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed)
+ * 	Description
+ * 		Compute a checksum difference, from the raw buffer pointed by
+ * 		*from*, of length *from_size* (that must be a multiple of 4),
+ * 		towards the raw buffer pointed by *to*, of size *to_size*
+ * 		(same remark). An optional *seed* can be added to the value
+ * 		(this can be cascaded, the seed may come from a previous call
+ * 		to the helper).
+ *
+ * 		This is flexible enough to be used in several ways:
+ *
+ * 		* With *from_size* == 0, *to_size* > 0 and *seed* set to
+ * 		  checksum, it can be used when pushing new data.
+ * 		* With *from_size* > 0, *to_size* == 0 and *seed* set to
+ * 		  checksum, it can be used when removing data from a packet.
+ * 		* With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
+ * 		  can be used to compute a diff. Note that *from_size* and
+ * 		  *to_size* do not need to be equal.
+ *
+ * 		This helper can be used in combination with
+ * 		**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
+ * 		which one can feed in the difference computed with
+ * 		**bpf_csum_diff**\ ().
+ * 	Return
+ * 		The checksum result, or a negative error code in case of
+ * 		failure.
+ *
+ * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * 	Description
+ * 		Retrieve tunnel options metadata for the packet associated to
+ * 		*skb*, and store the raw tunnel option data to the buffer *opt*
+ * 		of *size*.
+ *
+ * 		This helper can be used with encapsulation devices that can
+ * 		operate in "collect metadata" mode (please refer to the related
+ * 		note in the description of **bpf_skb_get_tunnel_key**\ () for
+ * 		more details). A particular example where this can be used is
+ * 		in combination with the Geneve encapsulation protocol, where it
+ * 		allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
+ * 		and retrieving arbitrary TLVs (Type-Length-Value headers) from
+ * 		the eBPF program. This allows for full customization of these
+ * 		headers.
+ * 	Return
+ * 		The size of the option data retrieved.
+ *
+ * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * 	Description
+ * 		Set tunnel options metadata for the packet associated to *skb*
+ * 		to the option data contained in the raw buffer *opt* of *size*.
+ *
+ * 		See also the description of the **bpf_skb_get_tunnel_opt**\ ()
+ * 		helper for additional information.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags)
+ * 	Description
+ * 		Change the protocol of the *skb* to *proto*. Currently
+ * 		supported are transition from IPv4 to IPv6, and from IPv6 to
+ * 		IPv4. The helper takes care of the groundwork for the
+ * 		transition, including resizing the socket buffer. The eBPF
+ * 		program is expected to fill the new headers, if any, via
+ * 		**skb_store_bytes**\ () and to recompute the checksums with
+ * 		**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
+ * 		(). The main case for this helper is to perform NAT64
+ * 		operations out of an eBPF program.
+ *
+ * 		Internally, the GSO type is marked as dodgy so that headers are
+ * 		checked and segments are recalculated by the GSO/GRO engine.
+ * 		The size for GSO target is adapted as well.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_change_type(struct sk_buff *skb, u32 type)
+ * 	Description
+ * 		Change the packet type for the packet associated to *skb*. This
+ * 		comes down to setting *skb*\ **->pkt_type** to *type*, except
+ * 		the eBPF program does not have a write access to *skb*\
+ * 		**->pkt_type** beside this helper. Using a helper here allows
+ * 		for graceful handling of errors.
+ *
+ * 		The major use case is to change incoming *skb*s to
+ * 		**PACKET_HOST** in a programmatic way instead of having to
+ * 		recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
+ * 		example.
+ *
+ * 		Note that *type* only allows certain values. At this time, they
+ * 		are:
+ *
+ * 		**PACKET_HOST**
+ * 			Packet is for us.
+ * 		**PACKET_BROADCAST**
+ * 			Send packet to all.
+ * 		**PACKET_MULTICAST**
+ * 			Send packet to group.
+ * 		**PACKET_OTHERHOST**
+ * 			Send packet to someone else.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index)
+ * 	Description
+ * 		Check whether *skb* is a descendant of the cgroup2 held by
+ * 		*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ * 	Return
+ * 		The return value depends on the result of the test, and can be:
+ *
+ * 		* 0, if the *skb* failed the cgroup2 descendant test.
+ * 		* 1, if the *skb* succeeded the cgroup2 descendant test.
+ * 		* A negative error code, if an error occurred.
+ *
+ * u32 bpf_get_hash_recalc(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the hash of the packet, *skb*\ **->hash**. If it is
+ * 		not set, in particular if the hash was cleared due to mangling,
+ * 		recompute this hash. Later accesses to the hash can be done
+ * 		directly with *skb*\ **->hash**.
+ *
+ * 		Calling **bpf_set_hash_invalid**\ (), changing a packet
+ * 		prototype with **bpf_skb_change_proto**\ (), or calling
+ * 		**bpf_skb_store_bytes**\ () with the
+ * 		**BPF_F_INVALIDATE_HASH** are actions susceptible to clear
+ * 		the hash and to trigger a new computation for the next call to
+ * 		**bpf_get_hash_recalc**\ ().
+ * 	Return
+ * 		The 32-bit hash.
  *
  * u64 bpf_get_current_task(void)
- *     Returns current task_struct
- *     Return: current
- *
- * int bpf_probe_write_user(void *dst, void *src, int len)
- *     safely attempt to write to a location
- *     @dst: destination address in userspace
- *     @src: source address on stack
- *     @len: number of bytes to copy
- *     Return: 0 on success or negative error
- *
- * int bpf_current_task_under_cgroup(map, index)
- *     Check cgroup2 membership of current task
- *     @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
- *     @index: index of the cgroup in the bpf_map
- *     Return:
- *       == 0 current failed the cgroup2 descendant test
- *       == 1 current succeeded the cgroup2 descendant test
- *        < 0 error
- *
- * int bpf_skb_change_tail(skb, len, flags)
- *     The helper will resize the skb to the given new size, to be used f.e.
- *     with control messages.
- *     @skb: pointer to skb
- *     @len: new skb length
- *     @flags: reserved
- *     Return: 0 on success or negative error
- *
- * int bpf_skb_pull_data(skb, len)
- *     The helper will pull in non-linear data in case the skb is non-linear
- *     and not all of len are part of the linear section. Only needed for
- *     read/write with direct packet access.
- *     @skb: pointer to skb
- *     @len: len to make read/writeable
- *     Return: 0 on success or negative error
- *
- * s64 bpf_csum_update(skb, csum)
- *     Adds csum into skb->csum in case of CHECKSUM_COMPLETE.
- *     @skb: pointer to skb
- *     @csum: csum to add
- *     Return: csum on success or negative error
- *
- * void bpf_set_hash_invalid(skb)
- *     Invalidate current skb->hash.
- *     @skb: pointer to skb
- *
- * int bpf_get_numa_node_id()
- *     Return: Id of current NUMA node.
- *
- * int bpf_skb_change_head()
- *     Grows headroom of skb and adjusts MAC header offset accordingly.
- *     Will extends/reallocae as required automatically.
- *     May change skb data pointer and will thus invalidate any check
- *     performed for direct packet access.
- *     @skb: pointer to skb
- *     @len: length of header to be pushed in front
- *     @flags: Flags (unused for now)
- *     Return: 0 on success or negative error
- *
- * int bpf_xdp_adjust_head(xdp_md, delta)
- *     Adjust the xdp_md.data by delta
- *     @xdp_md: pointer to xdp_md
- *     @delta: An positive/negative integer to be added to xdp_md.data
- *     Return: 0 on success or negative on error
+ * 	Return
+ * 		A pointer to the current task struct.
+ *
+ * int bpf_probe_write_user(void *dst, const void *src, u32 len)
+ * 	Description
+ * 		Attempt in a safe way to write *len* bytes from the buffer
+ * 		*src* to *dst* in memory. It only works for threads that are in
+ * 		user context, and *dst* must be a valid user space address.
+ *
+ * 		This helper should not be used to implement any kind of
+ * 		security mechanism because of TOC-TOU attacks, but rather to
+ * 		debug, divert, and manipulate execution of semi-cooperative
+ * 		processes.
+ *
+ * 		Keep in mind that this feature is meant for experiments, and it
+ * 		has a risk of crashing the system and running programs.
+ * 		Therefore, when an eBPF program using this helper is attached,
+ * 		a warning including PID and process name is printed to kernel
+ * 		logs.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_current_task_under_cgroup(struct bpf_map *map, u32 index)
+ * 	Description
+ * 		Check whether the probe is being run is the context of a given
+ * 		subset of the cgroup2 hierarchy. The cgroup2 to test is held by
+ * 		*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ * 	Return
+ * 		The return value depends on the result of the test, and can be:
+ *
+ * 		* 0, if the *skb* task belongs to the cgroup2.
+ * 		* 1, if the *skb* task does not belong to the cgroup2.
+ * 		* A negative error code, if an error occurred.
+ *
+ * int bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
+ * 	Description
+ * 		Resize (trim or grow) the packet associated to *skb* to the
+ * 		new *len*. The *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		The basic idea is that the helper performs the needed work to
+ * 		change the size of the packet, then the eBPF program rewrites
+ * 		the rest via helpers like **bpf_skb_store_bytes**\ (),
+ * 		**bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
+ * 		and others. This helper is a slow path utility intended for
+ * 		replies with control messages. And because it is targeted for
+ * 		slow path, the helper itself can afford to be slow: it
+ * 		implicitly linearizes, unclones and drops offloads from the
+ * 		*skb*.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_pull_data(struct sk_buff *skb, u32 len)
+ * 	Description
+ * 		Pull in non-linear data in case the *skb* is non-linear and not
+ * 		all of *len* are part of the linear section. Make *len* bytes
+ * 		from *skb* readable and writable. If a zero value is passed for
+ * 		*len*, then the whole length of the *skb* is pulled.
+ *
+ * 		This helper is only needed for reading and writing with direct
+ * 		packet access.
+ *
+ * 		For direct packet access, testing that offsets to access
+ * 		are within packet boundaries (test on *skb*\ **->data_end**) is
+ * 		susceptible to fail if offsets are invalid, or if the requested
+ * 		data is in non-linear parts of the *skb*. On failure the
+ * 		program can just bail out, or in the case of a non-linear
+ * 		buffer, use a helper to make the data available. The
+ * 		**bpf_skb_load_bytes**\ () helper is a first solution to access
+ * 		the data. Another one consists in using **bpf_skb_pull_data**
+ * 		to pull in once the non-linear parts, then retesting and
+ * 		eventually access the data.
+ *
+ * 		At the same time, this also makes sure the *skb* is uncloned,
+ * 		which is a necessary condition for direct write. As this needs
+ * 		to be an invariant for the write part only, the verifier
+ * 		detects writes and adds a prologue that is calling
+ * 		**bpf_skb_pull_data()** to effectively unclone the *skb* from
+ * 		the very beginning in case it is indeed cloned.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum)
+ * 	Description
+ * 		Add the checksum *csum* into *skb*\ **->csum** in case the
+ * 		driver has supplied a checksum for the entire packet into that
+ * 		field. Return an error otherwise. This helper is intended to be
+ * 		used in combination with **bpf_csum_diff**\ (), in particular
+ * 		when the checksum needs to be updated after data has been
+ * 		written into the packet through direct packet access.
+ * 	Return
+ * 		The checksum on success, or a negative error code in case of
+ * 		failure.
+ *
+ * void bpf_set_hash_invalid(struct sk_buff *skb)
+ * 	Description
+ * 		Invalidate the current *skb*\ **->hash**. It can be used after
+ * 		mangling on headers through direct packet access, in order to
+ * 		indicate that the hash is outdated and to trigger a
+ * 		recalculation the next time the kernel tries to access this
+ * 		hash or when the **bpf_get_hash_recalc**\ () helper is called.
+ *
+ * int bpf_get_numa_node_id(void)
+ * 	Description
+ * 		Return the id of the current NUMA node. The primary use case
+ * 		for this helper is the selection of sockets for the local NUMA
+ * 		node, when the program is attached to sockets using the
+ * 		**SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
+ * 		but the helper is also available to other eBPF program types,
+ * 		similarly to **bpf_get_smp_processor_id**\ ().
+ * 	Return
+ * 		The id of current NUMA node.
+ *
+ * int bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags)
+ * 	Description
+ * 		Grows headroom of packet associated to *skb* and adjusts the
+ * 		offset of the MAC header accordingly, adding *len* bytes of
+ * 		space. It automatically extends and reallocates memory as
+ * 		required.
+ *
+ * 		This helper can be used on a layer 3 *skb* to push a MAC header
+ * 		for redirection into a layer 2 device.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
+ * 		it is possible to use a negative value for *delta*. This helper
+ * 		can be used to prepare the packet for pushing or popping
+ * 		headers.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
  *
  * int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr)
- *     Copy a NUL terminated string from unsafe address. In case the string
- *     length is smaller than size, the target is not padded with further NUL
- *     bytes. In case the string length is larger than size, just count-1
- *     bytes are copied and the last byte is set to NUL.
- *     @dst: destination address
- *     @size: maximum number of bytes to copy, including the trailing NUL
- *     @unsafe_ptr: unsafe address
- *     Return:
- *       > 0 length of the string including the trailing NUL on success
- *       < 0 error
- *
- * u64 bpf_get_socket_cookie(skb)
- *     Get the cookie for the socket stored inside sk_buff.
- *     @skb: pointer to skb
- *     Return: 8 Bytes non-decreasing number on success or 0 if the socket
- *     field is missing inside sk_buff
- *
- * u32 bpf_get_socket_uid(skb)
- *     Get the owner uid of the socket stored inside sk_buff.
- *     @skb: pointer to skb
- *     Return: uid of the socket owner on success or overflowuid if failed.
- *
- * u32 bpf_set_hash(skb, hash)
- *     Set full skb->hash.
- *     @skb: pointer to skb
- *     @hash: hash to set
- *
- * int bpf_setsockopt(bpf_socket, level, optname, optval, optlen)
- *     Calls setsockopt. Not all opts are available, only those with
- *     integer optvals plus TCP_CONGESTION.
- *     Supported levels: SOL_SOCKET and IPPROTO_TCP
- *     @bpf_socket: pointer to bpf_socket
- *     @level: SOL_SOCKET or IPPROTO_TCP
- *     @optname: option name
- *     @optval: pointer to option value
- *     @optlen: length of optval in bytes
- *     Return: 0 or negative error
- *
- * int bpf_getsockopt(bpf_socket, level, optname, optval, optlen)
- *     Calls getsockopt. Not all opts are available.
- *     Supported levels: IPPROTO_TCP
- *     @bpf_socket: pointer to bpf_socket
- *     @level: IPPROTO_TCP
- *     @optname: option name
- *     @optval: pointer to option value
- *     @optlen: length of optval in bytes
- *     Return: 0 or negative error
- *
- * int bpf_sock_ops_cb_flags_set(bpf_sock_ops, flags)
- *     Set callback flags for sock_ops
- *     @bpf_sock_ops: pointer to bpf_sock_ops_kern struct
- *     @flags: flags value
- *     Return: 0 for no error
- *             -EINVAL if there is no full tcp socket
- *             bits in flags that are not supported by current kernel
- *
- * int bpf_skb_adjust_room(skb, len_diff, mode, flags)
- *     Grow or shrink room in sk_buff.
- *     @skb: pointer to skb
- *     @len_diff: (signed) amount of room to grow/shrink
- *     @mode: operation mode (enum bpf_adj_room_mode)
- *     @flags: reserved for future use
- *     Return: 0 on success or negative error code
- *
- * int bpf_sk_redirect_map(map, key, flags)
- *     Redirect skb to a sock in map using key as a lookup key for the
- *     sock in map.
- *     @map: pointer to sockmap
- *     @key: key to lookup sock in map
- *     @flags: reserved for future use
- *     Return: SK_PASS
- *
- * int bpf_sock_map_update(skops, map, key, flags)
- *	@skops: pointer to bpf_sock_ops
- *	@map: pointer to sockmap to update
- *	@key: key to insert/update sock in map
- *	@flags: same flags as map update elem
- *
- * int bpf_xdp_adjust_meta(xdp_md, delta)
- *     Adjust the xdp_md.data_meta by delta
- *     @xdp_md: pointer to xdp_md
- *     @delta: An positive/negative integer to be added to xdp_md.data_meta
- *     Return: 0 on success or negative on error
- *
- * int bpf_perf_event_read_value(map, flags, buf, buf_size)
- *     read perf event counter value and perf event enabled/running time
- *     @map: pointer to perf_event_array map
- *     @flags: index of event in the map or bitmask flags
- *     @buf: buf to fill
- *     @buf_size: size of the buf
- *     Return: 0 on success or negative error code
- *
- * int bpf_perf_prog_read_value(ctx, buf, buf_size)
- *     read perf prog attached perf event counter and enabled/running time
- *     @ctx: pointer to ctx
- *     @buf: buf to fill
- *     @buf_size: size of the buf
- *     Return : 0 on success or negative error code
- *
- * int bpf_override_return(pt_regs, rc)
- *	@pt_regs: pointer to struct pt_regs
- *	@rc: the return value to set
- *
- * int bpf_msg_redirect_map(map, key, flags)
- *     Redirect msg to a sock in map using key as a lookup key for the
- *     sock in map.
- *     @map: pointer to sockmap
- *     @key: key to lookup sock in map
- *     @flags: reserved for future use
- *     Return: SK_PASS
- *
- * int bpf_bind(ctx, addr, addr_len)
- *     Bind socket to address. Only binding to IP is supported, no port can be
- *     set in addr.
- *     @ctx: pointer to context of type bpf_sock_addr
- *     @addr: pointer to struct sockaddr to bind socket to
- *     @addr_len: length of sockaddr structure
- *     Return: 0 on success or negative error code
- *
- * int bpf_xdp_adjust_tail(xdp_md, delta)
- *     Adjust the xdp_md.data_end by delta. Only shrinking of packet's
- *     size is supported.
- *     @xdp_md: pointer to xdp_md
- *     @delta: A negative integer to be added to xdp_md.data_end
- *     Return: 0 on success or negative on error
- *
- * int bpf_skb_get_xfrm_state(skb, index, xfrm_state, size, flags)
- *     retrieve XFRM state
- *     @skb: pointer to skb
- *     @index: index of the xfrm state in the secpath
- *     @key: pointer to 'struct bpf_xfrm_state'
- *     @size: size of 'struct bpf_xfrm_state'
- *     @flags: room for future extensions
- *     Return: 0 on success or negative error
+ * 	Description
+ * 		Copy a NUL terminated string from an unsafe address
+ * 		*unsafe_ptr* to *dst*. The *size* should include the
+ * 		terminating NUL byte. In case the string length is smaller than
+ * 		*size*, the target is not padded with further NUL bytes. If the
+ * 		string length is larger than *size*, just *size*-1 bytes are
+ * 		copied and the last byte is set to NUL.
+ *
+ * 		On success, the length of the copied string is returned. This
+ * 		makes this helper useful in tracing programs for reading
+ * 		strings, and more importantly to get its length at runtime. See
+ * 		the following snippet:
+ *
+ * 		::
+ *
+ * 			SEC("kprobe/sys_open")
+ * 			void bpf_sys_open(struct pt_regs *ctx)
+ * 			{
+ * 			        char buf[PATHLEN]; // PATHLEN is defined to 256
+ * 			        int res = bpf_probe_read_str(buf, sizeof(buf),
+ * 				                             ctx->di);
+ *
+ * 				// Consume buf, for example push it to
+ * 				// userspace via bpf_perf_event_output(); we
+ * 				// can use res (the string length) as event
+ * 				// size, after checking its boundaries.
+ * 			}
+ *
+ * 		In comparison, using **bpf_probe_read()** helper here instead
+ * 		to read the string would require to estimate the length at
+ * 		compile time, and would often result in copying more memory
+ * 		than necessary.
+ *
+ * 		Another useful use case is when parsing individual process
+ * 		arguments or individual environment variables navigating
+ * 		*current*\ **->mm->arg_start** and *current*\
+ * 		**->mm->env_start**: using this helper and the return value,
+ * 		one can quickly iterate at the right offset of the memory area.
+ * 	Return
+ * 		On success, the strictly positive length of the string,
+ * 		including the trailing NUL character. On error, a negative
+ * 		value.
+ *
+ * u64 bpf_get_socket_cookie(struct sk_buff *skb)
+ * 	Description
+ * 		If the **struct sk_buff** pointed by *skb* has a known socket,
+ * 		retrieve the cookie (generated by the kernel) of this socket.
+ * 		If no cookie has been set yet, generate a new cookie. Once
+ * 		generated, the socket cookie remains stable for the life of the
+ * 		socket. This helper can be useful for monitoring per socket
+ * 		networking traffic statistics as it provides a unique socket
+ * 		identifier per namespace.
+ * 	Return
+ * 		A 8-byte long non-decreasing number on success, or 0 if the
+ * 		socket field is missing inside *skb*.
+ *
+ * u32 bpf_get_socket_uid(struct sk_buff *skb)
+ * 	Return
+ * 		The owner UID of the socket associated to *skb*. If the socket
+ * 		is **NULL**, or if it is not a full socket (i.e. if it is a
+ * 		time-wait or a request socket instead), **overflowuid** value
+ * 		is returned (note that **overflowuid** might also be the actual
+ * 		UID value for the socket).
+ *
+ * u32 bpf_set_hash(struct sk_buff *skb, u32 hash)
+ * 	Description
+ * 		Set the full hash for *skb* (set the field *skb*\ **->hash**)
+ * 		to value *hash*.
+ * 	Return
+ * 		0
+ *
+ * int bpf_setsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen)
+ * 	Description
+ * 		Emulate a call to **setsockopt()** on the socket associated to
+ * 		*bpf_socket*, which must be a full socket. The *level* at
+ * 		which the option resides and the name *optname* of the option
+ * 		must be specified, see **setsockopt(2)** for more information.
+ * 		The option value of length *optlen* is pointed by *optval*.
+ *
+ * 		This helper actually implements a subset of **setsockopt()**.
+ * 		It supports the following *level*\ s:
+ *
+ * 		* **SOL_SOCKET**, which supports the following *optname*\ s:
+ * 		  **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
+ * 		  **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**.
+ * 		* **IPPROTO_TCP**, which supports the following *optname*\ s:
+ * 		  **TCP_CONGESTION**, **TCP_BPF_IW**,
+ * 		  **TCP_BPF_SNDCWND_CLAMP**.
+ * 		* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * 		* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_adjust_room(struct sk_buff *skb, u32 len_diff, u32 mode, u64 flags)
+ * 	Description
+ * 		Grow or shrink the room for data in the packet associated to
+ * 		*skb* by *len_diff*, and according to the selected *mode*.
+ *
+ * 		There is a single supported mode at this time:
+ *
+ * 		* **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
+ * 		  (room space is added or removed below the layer 3 header).
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the endpoint referenced by *map* at
+ * 		index *key*. Depending on its type, this *map* can contain
+ * 		references to net devices (for forwarding packets through other
+ * 		ports), or to CPUs (for redirecting XDP frames to another CPU;
+ * 		but this is only implemented for native XDP (with driver
+ * 		support) as of this writing).
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		When used to redirect packets to net devices, this helper
+ * 		provides a high performance increase over **bpf_redirect**\ ().
+ * 		This is due to various implementation details of the underlying
+ * 		mechanisms, one of which is the fact that **bpf_redirect_map**\
+ * 		() tries to send packet as a "bulk" to the device.
+ * 	Return
+ * 		**XDP_REDIRECT** on success, or **XDP_ABORTED** on error.
+ *
+ * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * 		egress interfaces can be used for redirection. The
+ * 		**BPF_F_INGRESS** value in *flags* is used to make the
+ * 		distinction (ingress path is selected if the flag is present,
+ * 		egress path otherwise). This is the only flag supported for now.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_sock_map_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
+ * 	Description
+ * 		Add an entry to, or update a *map* referencing sockets. The
+ * 		*skops* is used as a new value for the entry associated to
+ * 		*key*. *flags* is one of:
+ *
+ * 		**BPF_NOEXIST**
+ * 			The entry for *key* must not exist in the map.
+ * 		**BPF_EXIST**
+ * 			The entry for *key* must already exist in the map.
+ * 		**BPF_ANY**
+ * 			No condition on the existence of the entry for *key*.
+ *
+ * 		If the *map* has eBPF programs (parser and verdict), those will
+ * 		be inherited by the socket being added. If the socket is
+ * 		already attached to eBPF programs, this results in an error.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust the address pointed by *xdp_md*\ **->data_meta** by
+ * 		*delta* (which can be positive or negative). Note that this
+ * 		operation modifies the address stored in *xdp_md*\ **->data**,
+ * 		so the latter must be loaded only after the helper has been
+ * 		called.
+ *
+ * 		The use of *xdp_md*\ **->data_meta** is optional and programs
+ * 		are not required to use it. The rationale is that when the
+ * 		packet is processed with XDP (e.g. as DoS filter), it is
+ * 		possible to push further meta data along with it before passing
+ * 		to the stack, and to give the guarantee that an ingress eBPF
+ * 		program attached as a TC classifier on the same device can pick
+ * 		this up for further post-processing. Since TC works with socket
+ * 		buffers, it remains possible to set from XDP the **mark** or
+ * 		**priority** pointers, or other pointers for the socket buffer.
+ * 		Having this scratch space generic and programmable allows for
+ * 		more flexibility as the user is free to store whatever meta
+ * 		data they need.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size)
+ * 	Description
+ * 		Read the value of a perf event counter, and store it into *buf*
+ * 		of size *buf_size*. This helper relies on a *map* of type
+ * 		**BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
+ * 		counter is selected when *map* is updated with perf event file
+ * 		descriptors. The *map* is an array whose size is the number of
+ * 		available CPUs, and each cell contains a value relative to one
+ * 		CPU. The value to retrieve is indicated by *flags*, that
+ * 		contains the index of the CPU to look up, masked with
+ * 		**BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * 		**BPF_F_CURRENT_CPU** to indicate that the value for the
+ * 		current CPU should be retrieved.
+ *
+ * 		This helper behaves in a way close to
+ * 		**bpf_perf_event_read**\ () helper, save that instead of
+ * 		just returning the value observed, it fills the *buf*
+ * 		structure. This allows for additional data to be retrieved: in
+ * 		particular, the enabled and running times (in *buf*\
+ * 		**->enabled** and *buf*\ **->running**, respectively) are
+ * 		copied. In general, **bpf_perf_event_read_value**\ () is
+ * 		recommended over **bpf_perf_event_read**\ (), which has some
+ * 		ABI issues and provides fewer functionalities.
+ *
+ * 		These values are interesting, because hardware PMU (Performance
+ * 		Monitoring Unit) counters are limited resources. When there are
+ * 		more PMU based perf events opened than available counters,
+ * 		kernel will multiplex these events so each event gets certain
+ * 		percentage (but not all) of the PMU time. In case that
+ * 		multiplexing happens, the number of samples or counter value
+ * 		will not reflect the case compared to when no multiplexing
+ * 		occurs. This makes comparison between different runs difficult.
+ * 		Typically, the counter value should be normalized before
+ * 		comparing to other experiments. The usual normalization is done
+ * 		as follows.
+ *
+ * 		::
+ *
+ * 			normalized_counter = counter * t_enabled / t_running
+ *
+ * 		Where t_enabled is the time enabled for event and t_running is
+ * 		the time running for event since last normalization. The
+ * 		enabled and running times are accumulated since the perf event
+ * 		open. To achieve scaling factor between two invocations of an
+ * 		eBPF program, users can can use CPU id as the key (which is
+ * 		typical for perf array usage model) to remember the previous
+ * 		value and do the calculation inside the eBPF program.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_perf_prog_read_value(struct bpf_perf_event_data_kern *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
+ * 	Description
+ * 		For en eBPF program attached to a perf event, retrieve the
+ * 		value of the event counter associated to *ctx* and store it in
+ * 		the structure pointed by *buf* and of size *buf_size*. Enabled
+ * 		and running times are also stored in the structure (see
+ * 		description of helper **bpf_perf_event_read_value**\ () for
+ * 		more details).
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_getsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen)
+ * 	Description
+ * 		Emulate a call to **getsockopt()** on the socket associated to
+ * 		*bpf_socket*, which must be a full socket. The *level* at
+ * 		which the option resides and the name *optname* of the option
+ * 		must be specified, see **getsockopt(2)** for more information.
+ * 		The retrieved value is stored in the structure pointed by
+ * 		*opval* and of length *optlen*.
+ *
+ * 		This helper actually implements a subset of **getsockopt()**.
+ * 		It supports the following *level*\ s:
+ *
+ * 		* **IPPROTO_TCP**, which supports *optname*
+ * 		  **TCP_CONGESTION**.
+ * 		* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * 		* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_override_return(struct pt_reg *regs, u64 rc)
+ * 	Description
+ * 		Used for error injection, this helper uses kprobes to override
+ * 		the return value of the probed function, and to set it to *rc*.
+ * 		The first argument is the context *regs* on which the kprobe
+ * 		works.
+ *
+ * 		This helper works by setting setting the PC (program counter)
+ * 		to an override function which is run in place of the original
+ * 		probed function. This means the probed function is not run at
+ * 		all. The replacement function just returns with the required
+ * 		value.
+ *
+ * 		This helper has security implications, and thus is subject to
+ * 		restrictions. It is only available if the kernel was compiled
+ * 		with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
+ * 		option, and in this case it only works on functions tagged with
+ * 		**ALLOW_ERROR_INJECTION** in the kernel code.
+ *
+ * 		Also, the helper is only available for the architectures having
+ * 		the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
+ * 		x86 architecture is the only one to support this feature.
+ * 	Return
+ * 		0
+ *
+ * int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops_kern *bpf_sock, int argval)
+ * 	Description
+ * 		Attempt to set the value of the **bpf_sock_ops_cb_flags** field
+ * 		for the full TCP socket associated to *bpf_sock_ops* to
+ * 		*argval*.
+ *
+ * 		The primary use of this field is to determine if there should
+ * 		be calls to eBPF programs of type
+ * 		**BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
+ * 		code. A program of the same type can change its value, per
+ * 		connection and as necessary, when the connection is
+ * 		established. This field is directly accessible for reading, but
+ * 		this helper must be used for updates in order to return an
+ * 		error if an eBPF program tries to set a callback that is not
+ * 		supported in the current kernel.
+ *
+ * 		The supported callback values that *argval* can combine are:
+ *
+ * 		* **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
+ * 		* **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
+ * 		* **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
+ *
+ * 		Here are some examples of where one could call such eBPF
+ * 		program:
+ *
+ * 		* When RTO fires.
+ * 		* When a packet is retransmitted.
+ * 		* When the connection terminates.
+ * 		* When a packet is sent.
+ * 		* When a packet is received.
+ * 	Return
+ * 		Code **-EINVAL** if the socket is not a full TCP socket;
+ * 		otherwise, a positive number containing the bits that could not
+ * 		be set is returned (which comes down to 0 if all bits were set
+ * 		as required).
+ *
+ * int bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		This helper is used in programs implementing policies at the
+ * 		socket level. If the message *msg* is allowed to pass (i.e. if
+ * 		the verdict eBPF program returns **SK_PASS**), redirect it to
+ * 		the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * 		egress interfaces can be used for redirection. The
+ * 		**BPF_F_INGRESS** value in *flags* is used to make the
+ * 		distinction (ingress path is selected if the flag is present,
+ * 		egress path otherwise). This is the only flag supported for now.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, apply the verdict of the eBPF program to
+ * 		the next *bytes* (number of bytes) of message *msg*.
+ *
+ * 		For example, this helper can be used in the following cases:
+ *
+ * 		* A single **sendmsg**\ () or **sendfile**\ () system call
+ * 		  contains multiple logical messages that the eBPF program is
+ * 		  supposed to read and for which it should apply a verdict.
+ * 		* An eBPF program only cares to read the first *bytes* of a
+ * 		  *msg*. If the message has a large payload, then setting up
+ * 		  and calling the eBPF program repeatedly for all bytes, even
+ * 		  though the verdict is already known, would create unnecessary
+ * 		  overhead.
+ *
+ * 		When called from within an eBPF program, the helper sets a
+ * 		counter internal to the BPF infrastructure, that is used to
+ * 		apply the last verdict to the next *bytes*. If *bytes* is
+ * 		smaller than the current data being processed from a
+ * 		**sendmsg**\ () or **sendfile**\ () system call, the first
+ * 		*bytes* will be sent and the eBPF program will be re-run with
+ * 		the pointer for start of data pointing to byte number *bytes*
+ * 		**+ 1**. If *bytes* is larger than the current data being
+ * 		processed, then the eBPF verdict will be applied to multiple
+ * 		**sendmsg**\ () or **sendfile**\ () calls until *bytes* are
+ * 		consumed.
+ *
+ * 		Note that if a socket closes with the internal counter holding
+ * 		a non-zero value, this is not a problem because data is not
+ * 		being buffered for *bytes* and is sent as it is received.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, prevent the execution of the verdict eBPF
+ * 		program for message *msg* until *bytes* (byte number) have been
+ * 		accumulated.
+ *
+ * 		This can be used when one needs a specific number of bytes
+ * 		before a verdict can be assigned, even if the data spans
+ * 		multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
+ * 		case would be a user calling **sendmsg**\ () repeatedly with
+ * 		1-byte long message segments. Obviously, this is bad for
+ * 		performance, but it is still valid. If the eBPF program needs
+ * 		*bytes* bytes to validate a header, this helper can be used to
+ * 		prevent the eBPF program to be called again until *bytes* have
+ * 		been accumulated.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
+ * 	Description
+ * 		For socket policies, pull in non-linear data from user space
+ * 		for *msg* and set pointers *msg*\ **->data** and *msg*\
+ * 		**->data_end** to *start* and *end* bytes offsets into *msg*,
+ * 		respectively.
+ *
+ * 		If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
+ * 		*msg* it can only parse data that the (**data**, **data_end**)
+ * 		pointers have already consumed. For **sendmsg**\ () hooks this
+ * 		is likely the first scatterlist element. But for calls relying
+ * 		on the **sendpage** handler (e.g. **sendfile**\ ()) this will
+ * 		be the range (**0**, **0**) because the data is shared with
+ * 		user space and by default the objective is to avoid allowing
+ * 		user space to modify data while (or after) eBPF verdict is
+ * 		being decided. This helper can be used to pull in data and to
+ * 		set the start and end pointer to given values. Data will be
+ * 		copied if necessary (i.e. if data was not linear and if start
+ * 		and end pointers do not point to the same chunk).
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_bind(struct bpf_sock_addr_kern *ctx, struct sockaddr *addr, int addr_len)
+ * 	Description
+ * 		Bind the socket associated to *ctx* to the address pointed by
+ * 		*addr*, of length *addr_len*. This allows for making outgoing
+ * 		connection from the desired IP address, which can be useful for
+ * 		example when all processes inside a cgroup should use one
+ * 		single IP address on a host that has multiple IP configured.
+ *
+ * 		This helper works for IPv4 and IPv6, TCP and UDP sockets. The
+ * 		domain (*addr*\ **->sa_family**) must be **AF_INET** (or
+ * 		**AF_INET6**). Looking for a free port to bind to can be
+ * 		expensive, therefore binding to port is not permitted by the
+ * 		helper: *addr*\ **->sin_port** (or **sin6_port**, respectively)
+ * 		must be set to zero.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
+ * 		only possible to shrink the packet as of this writing,
+ * 		therefore *delta* must be a negative integer.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags)
+ * 	Description
+ * 		Retrieve the XFRM state (IP transform framework, see also
+ * 		**ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
+ *
+ * 		The retrieved value is stored in the **struct bpf_xfrm_state**
+ * 		pointed by *xfrm_state* and of length *size*.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		This helper is available only if the kernel was compiled with
+ * 		**CONFIG_XFRM** configuration option.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Documentation]     [Netdev]     [Linux Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux