Re: [PATCH] mtd: nand: Add support for M5441x NFC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jean-Michel,

On 21/6/24 02:25, Jean-Michel Hautbois wrote:
The vf610_nfc driver is also the one which should be used for the
coldfire series. Sadly, these device don't support device-tree and so we
need to do a few modifications:
- Adapt the probe to use pdata if available
- Add a new variant as there is a small part to adapt in
   vf610_nfc_select_target()
- Add the corresponding missing register definitions

Tested successfully on a 54418 custom board with a raw NAND:
[    2.640000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[    2.650000] nand: Micron MT29F4G08ABADAWP
[    2.650000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxx>
---
  arch/m68k/include/asm/m5441xsim.h |  7 ++++

I can take this ColdFire part via the m68knommu/coldfire tree if you like?

Regards
Greg


  drivers/mtd/nand/raw/Kconfig      |  2 +-
  drivers/mtd/nand/raw/vf610_nfc.c  | 79 ++++++++++++++++++++++++++++++++++-----
  3 files changed, 77 insertions(+), 11 deletions(-)

diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h
index f48cf63bd782..d4ee1eab7c4a 100644
--- a/arch/m68k/include/asm/m5441xsim.h
+++ b/arch/m68k/include/asm/m5441xsim.h
@@ -99,6 +99,7 @@
  #define MCFINT2_PIT1		14
  #define MCFINT2_PIT2		15
  #define MCFINT2_PIT3		16
+#define MCFINT2_NFC		25
  #define MCFINT2_RTC		26
/*
@@ -333,4 +334,10 @@
  #define MCF_IRQ_BOFF1		(MCFINT1_VECBASE + MCFINT1_FLEXCAN1_BOFF)
  #define MCF_IRQ_ERR1		(MCFINT1_VECBASE + MCFINT1_FLEXCAN1_ERR)
+/*
+ * Flash module
+ */
+#define MCF_NFC_BASE		0xfc0fc000
+#define MCF_NFC_SIZE		(0xfc0fff3b - 0xfc0fc000)
+#define MCF_NFC_ISR		(MCFINT2_VECBASE + MCFINT2_NFC)
  #endif /* m5441xsim_h */
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index cbf8ae85e1ae..2ea3ee32a540 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -252,7 +252,7 @@ config MTD_NAND_FSL_UPM
config MTD_NAND_VF610_NFC
  	tristate "Freescale VF610/MPC5125 NAND controller"
-	depends on (SOC_VF610 || COMPILE_TEST)
+	depends on (SOC_VF610 || COMPILE_TEST || M5441x)
  	depends on HAS_IOMEM
  	help
  	  Enables support for NAND Flash Controller on some Freescale
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index f31d23219f91..06f1ed5433c8 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -146,6 +146,7 @@
enum vf610_nfc_variant {
  	NFC_VFC610 = 1,
+	NFC_M54418 = 2,
  };
struct vf610_nfc {
@@ -486,10 +487,24 @@ static void vf610_nfc_select_target(struct nand_chip *chip, unsigned int cs)
  	if (nfc->variant != NFC_VFC610)
  		return;
- tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
-	tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
-	tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
-	tmp |= BIT(cs) << ROW_ADDR_CHIP_SEL_SHIFT;
+	if (nfc->variant == NFC_M54418) {
+		/*
+		 * According to the Reference Manual:
+		 * bit 24: Reserved, must be set (ROW_ADDR_CHIP_SEL_SHIFT)
+		 * bit 25-27: Reserved, must be cleared
+		 * bit 28: Reserved, must be set (ROW_ADDR_CHIP_SEL_RB_SHIFT)
+		 * bit 29-31: Reserved, must be cleared
+		 */
+		tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
+		tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
+		tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
+		tmp |= 1 << ROW_ADDR_CHIP_SEL_SHIFT;
+	} else {
+		tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
+		tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
+		tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
+		tmp |= BIT(cs) << ROW_ADDR_CHIP_SEL_SHIFT;
+	}
vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
  }
@@ -700,11 +715,26 @@ static int vf610_nfc_write_oob(struct nand_chip *chip, int page)
  	return nand_prog_page_end_op(chip);
  }
+#ifdef CONFIG_OF
  static const struct of_device_id vf610_nfc_dt_ids[] = {
  	{ .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
  	{ /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
+#endif
+
+static const struct platform_device_id vf610_nfc_id_table[] = {
+	{
+		.name = "mcf5441x-nfc",
+		.driver_data = (kernel_ulong_t)NFC_M54418,
+	}, {
+		.name = "vf610-nfc",
+		.driver_data = (kernel_ulong_t)NFC_VFC610,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(platform, vf610_nfc_id_table);
static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
  {
@@ -810,6 +840,7 @@ static int vf610_nfc_probe(struct platform_device *pdev)
  	struct vf610_nfc *nfc;
  	struct mtd_info *mtd;
  	struct nand_chip *chip;
+	struct nand_chip *pdata;
  	struct device_node *child;
  	int err;
  	int irq;
@@ -820,30 +851,53 @@ static int vf610_nfc_probe(struct platform_device *pdev)
nfc->dev = &pdev->dev;
  	chip = &nfc->chip;
+	pdata = dev_get_platdata(&pdev->dev);
+	if (pdata)
+		*chip = *pdata;
+
  	mtd = nand_to_mtd(chip);
mtd->owner = THIS_MODULE;
  	mtd->dev.parent = nfc->dev;
-	mtd->name = DRV_NAME;
+
+	/*
+	 * We keep the MTD name unchanged to avoid breaking platforms
+	 * where the MTD cmdline parser is used and the bootloader
+	 * has not been updated to use the new naming scheme.
+	 */
+	if (!nfc->dev->of_node)
+		mtd->name = "NAND";
+	else
+		mtd->name = DRV_NAME;
irq = platform_get_irq(pdev, 0);
  	if (irq < 0)
  		return irq;
nfc->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(nfc->regs))
+	if (IS_ERR(nfc->regs)) {
+		dev_err(nfc->dev, "Unable to map registers!\n");
  		return PTR_ERR(nfc->regs);
+	}
+#ifdef CONFIG_OF
  	nfc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
  	if (IS_ERR(nfc->clk)) {
  		dev_err(nfc->dev, "Unable to get and enable clock!\n");
  		return PTR_ERR(nfc->clk);
  	}
- nfc->variant = (enum vf610_nfc_variant)device_get_match_data(&pdev->dev);
-	if (!nfc->variant)
-		return -ENODEV;
+	const void *data = device_get_match_data(&pdev->dev);
+ nfc->variant = (enum vf610_nfc_variant)data;
+	if (!nfc->variant) {
+		dev_err(nfc->dev, "No variant data found!\n");
+		return -ENODEV;
+	}
+#else
+	nfc->variant = (enum vf610_nfc_variant)platform_get_device_id(pdev)->driver_data;
+#endif
+#ifdef CONFIG_OF
  	for_each_available_child_of_node(nfc->dev->of_node, child) {
  		if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
@@ -862,6 +916,10 @@ static int vf610_nfc_probe(struct platform_device *pdev)
  		dev_err(nfc->dev, "NAND chip sub-node missing!\n");
  		return -ENODEV;
  	}
+#else
+	nfc->clk = NULL;
+	mtd->dev.parent = &pdev->dev;
+#endif
chip->options |= NAND_NO_SUBPAGE_WRITE; @@ -937,11 +995,12 @@ static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
  static struct platform_driver vf610_nfc_driver = {
  	.driver		= {
  		.name	= DRV_NAME,
-		.of_match_table = vf610_nfc_dt_ids,
+		.of_match_table = of_match_ptr(vf610_nfc_dt_ids),
  		.pm	= &vf610_nfc_pm_ops,
  	},
  	.probe		= vf610_nfc_probe,
  	.remove_new	= vf610_nfc_remove,
+	.id_table = vf610_nfc_id_table,
  };
module_platform_driver(vf610_nfc_driver);

---
base-commit: e5b3efbe1ab1793bb49ae07d56d0973267e65112
change-id: 20240620-upstream-nfc-mcf5441x-82e23b45e286

Best regards,




[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux