[PATCH v3 1/2] m68k: Handle __generic_copy_to_user faults more carefully

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As mentioned by Finn Thain in his patch to improve put_user
exception handling on 040, a similar problem exists on 030
processors.

A moves instruction that crosses a page boundary from a
mapped page into an unmapped one will cause a mid-instruction
bus error exception (frame format b), with the PC pointing
(usually) two instructions past the faulting movesl instruction.

Our exception handling in __generic_copy_to_user only covers
the instruction immediately following the faulting one. As
a result, fixup_exception in send_fault_sig does not detect
this case, and cause send_fault_sig to oops.

Extend the exception table to cover one additional instruction
beyond the moves[lwb] instructions.

Tested on 68030 (Atari Falcon 030) with transfers beginning
at one to six bytes offset from the end of a mapped page,
followed by further bytes on an unmapped page (testcase
derived from stress-ng sysbadaddr stressor by Finn Thain).

Tested on 68040 (Mac Quadra) and 68030 (Mac IIci) by Finn Thain.

A similar problem is present in __clear_user(); modify the
exception table for that function in the same way (tested by
Finn Thain).

Cc: Finn Thain <fthain@xxxxxxxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: linux-m68k@xxxxxxxxxxxxxxxxxxxx
Tested-by: Finn Thain <fthain@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/all/e0f23460779e6d16e2633486ac4841790ef2aca0.1713176294.git.fthain@xxxxxxxxxxxxxx
Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx>

---

Changes from RFC v2:

Finn Thain:

- add missing extension table entries and final NOP in
  __generic_copy_to_user faults in 040 tests

Michael Schmitz:

- add yet another exception table entry in __clear_user

Changes from RFC v1:

Michael Schmitz:

- use extended exception table instead of additional NOPs
---
 arch/m68k/lib/uaccess.c | 56 ++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 23 deletions(-)

diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 86b6fed5151c..e3ed893047f8 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -62,35 +62,42 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from,
 
 	asm volatile ("\n"
 		"	tst.l	%0\n"
-		"	jeq	4f\n"
+		"	jeq	5f\n"
 		"1:	move.l	(%1)+,%3\n"
 		"2:	"MOVES".l	%3,(%2)+\n"
 		"3:	subq.l	#1,%0\n"
-		"	jne	1b\n"
-		"4:	btst	#1,%5\n"
-		"	jeq	6f\n"
-		"	move.w	(%1)+,%3\n"
-		"5:	"MOVES".w	%3,(%2)+\n"
-		"6:	btst	#0,%5\n"
+		"4:	jne	1b\n"
+		"5:	btst	#1,%5\n"
 		"	jeq	8f\n"
-		"	move.b	(%1)+,%3\n"
-		"7:	"MOVES".b  %3,(%2)+\n"
-		"8:\n"
+		"6:	move.w	(%1)+,%3\n"
+		"7:	"MOVES".w	%3,(%2)+\n"
+		"8:	btst	#0,%5\n"
+		"9:	jeq	13f\n"
+		"10:	move.b	(%1)+,%3\n"
+		"11:	"MOVES".b	%3,(%2)+\n"
+		"12:	nop\n"
+		"13:\n"
 		"	.section .fixup,\"ax\"\n"
 		"	.even\n"
 		"20:	lsl.l	#2,%0\n"
 		"50:	add.l	%5,%0\n"
-		"	jra	8b\n"
+		"	jra	13b\n"
 		"	.previous\n"
 		"\n"
 		"	.section __ex_table,\"a\"\n"
 		"	.align	4\n"
+		"	.long	1b,20b\n"
 		"	.long	2b,20b\n"
 		"	.long	3b,20b\n"
-		"	.long	5b,50b\n"
+		"	.long	4b,20b\n"
+		"	.long	5b,20b\n"
 		"	.long	6b,50b\n"
 		"	.long	7b,50b\n"
 		"	.long	8b,50b\n"
+		"	.long	9b,50b\n"
+		"	.long	10b,50b\n"
+		"	.long	11b,50b\n"
+		"	.long	12b,50b\n"
 		"	.previous"
 		: "=d" (res), "+a" (from), "+a" (to), "=&d" (tmp)
 		: "0" (n / 4), "d" (n & 3));
@@ -109,32 +116,35 @@ unsigned long __clear_user(void __user *to, unsigned long n)
 
 	asm volatile ("\n"
 		"	tst.l	%0\n"
-		"	jeq	3f\n"
+		"	jeq	4f\n"
 		"1:	"MOVES".l	%2,(%1)+\n"
 		"2:	subq.l	#1,%0\n"
-		"	jne	1b\n"
-		"3:	btst	#1,%4\n"
-		"	jeq	5f\n"
-		"4:	"MOVES".w	%2,(%1)+\n"
-		"5:	btst	#0,%4\n"
-		"	jeq	7f\n"
-		"6:	"MOVES".b	%2,(%1)\n"
-		"7:\n"
+		"3:	jne	1b\n"
+		"4:	btst	#1,%4\n"
+		"	jeq	6f\n"
+		"5:	"MOVES".w	%2,(%1)+\n"
+		"6:	btst	#0,%4\n"
+		"7:	jeq	9f\n"
+		"8:	"MOVES".b	%2,(%1)\n"
+		"9:\n"
 		"	.section .fixup,\"ax\"\n"
 		"	.even\n"
 		"10:	lsl.l	#2,%0\n"
 		"40:	add.l	%4,%0\n"
-		"	jra	7b\n"
+		"	jra	9b\n"
 		"	.previous\n"
 		"\n"
 		"	.section __ex_table,\"a\"\n"
 		"	.align	4\n"
 		"	.long	1b,10b\n"
 		"	.long	2b,10b\n"
-		"	.long	4b,40b\n"
+		"	.long	3b,10b\n"
+		"	.long	4b,10b\n"
 		"	.long	5b,40b\n"
 		"	.long	6b,40b\n"
 		"	.long	7b,40b\n"
+		"	.long	8b,40b\n"
+		"	.long	9b,40b\n"
 		"	.previous"
 		: "=d" (res), "+a" (to)
 		: "d" (0), "0" (n / 4), "d" (n & 3));
-- 
2.17.1





[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux