On 01 July 2023 at 04:35 am, Michael Schmitz wrote:
Making 'blk' sector_t (i.e. 64 bit if LBD support is active)
fails the 'blk>0' test in the partition block loop if a
value of (signed int) -1 is used to mark the end of the
partition block list.
This bug was introduced in patch 3 of my prior Amiga partition
support fixes series, and spotted by Christian Zigotzky when
testing the latest block updates.
Explicitly cast 'blk' to signed int to allow use of -1 to
terminate the partition block linked list.
Reported-by: Christian Zigotzky <chzigotzky@xxxxxxxxxxx>
Fixes: b6f3f28f60 ("Linux 6.4")
Message-ID: 024ce4fa-cc6d-50a2-9aae-3701d0ebf668@xxxxxxxxxxx
Cc: <stable@xxxxxxxxxxxxxxx> # 6.4
Link: https://lore.kernel.org/r/024ce4fa-cc6d-50a2-9aae-3701d0ebf668@xxxxxxxxxxx
Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
---
block/partitions/amiga.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/partitions/amiga.c b/block/partitions/amiga.c
index ed222b9c901b..506921095412 100644
--- a/block/partitions/amiga.c
+++ b/block/partitions/amiga.c
@@ -90,7 +90,7 @@ int amiga_partition(struct parsed_partitions *state)
}
blk = be32_to_cpu(rdb->rdb_PartitionList);
put_dev_sector(sect);
- for (part = 1; blk>0 && part<=16; part++, put_dev_sector(sect)) {
+ for (part = 1; (s32) blk>0 && part<=16; part++, put_dev_sector(sect)) {
/* Read in terms partition table understands */
if (check_mul_overflow(blk, (sector_t) blksize, &blk)) {
pr_err("Dev %s: overflow calculating partition block %llu! Skipping partitions %u and beyond\n",
Hello Michael,
Thanks for your patch.
I patched the latest git kernel source code with your patch today but
unfortunately the kernel has reported a bad geometry. (EXT4-fs (sda4):
bad geometry: block count ...)
dmesg | grep -i sda
[ 4.025449] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks:
(2.00 TB/1.82 TiB)
[ 4.071978] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.119333] sd 0:0:0:0: [sda] Write Protect is off
[ 4.165958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.212921] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.259469] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 4.502519] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2
(SFS^B)(res 2 spb 1) sda3 (SFS^B)(res 2 spb 2) sda4 ((res 2 spb 1)
[ 4.551981] sd 0:0:0:0: [sda] Attached SCSI disk
[ 82.421727] EXT4-fs (sda4): bad geometry: block count 319655862
exceeds size of device (317690430 blocks)
I can't mount the ext4 partition on the RDB disk and booting isn't
possible as well.
Thanks,
Christian
