Re: [PATCH v1 1/1] gpiolib: Remove unused gpio_cansleep()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi andy,

On 2023/6/2 23:01, Andy Shevchenko wrote:
There is not a single user in the entire kernel of this deprecated API,
kill it for good.

Signed-off-by: Andy Shevchenko<andriy.shevchenko@xxxxxxxxxxxxxxx>
---
  Documentation/driver-api/gpio/legacy.rst           | 12 +-----------
  .../translations/zh_CN/driver-api/gpio/legacy.rst  | 14 +++-----------
  Documentation/translations/zh_TW/gpio.txt          | 14 +++-----------
  arch/m68k/include/asm/mcfgpio.h                    |  8 --------
  arch/mips/include/asm/mach-au1x00/gpio-au1000.h    |  5 -----
  arch/mips/include/asm/mach-au1x00/gpio-au1300.h    |  5 -----
  include/linux/gpio.h                               | 12 ------------
  7 files changed, 7 insertions(+), 63 deletions(-)

diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index 9eda54811faa..b6505914791c 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -165,8 +165,7 @@ Most GPIO controllers can be accessed with memory read/write instructions.
  Those don't need to sleep, and can safely be done from inside hard
  (nonthreaded) IRQ handlers and similar contexts.
-Use the following calls to access such GPIOs,
-for which gpio_cansleep() will always return false (see below)::
+Use the following calls to access such GPIOs::
/* GPIO INPUT: return zero or nonzero */
  	int gpio_get_value(unsigned gpio);
@@ -200,13 +199,6 @@ Some GPIO controllers must be accessed using message based busses like I2C
  or SPI.  Commands to read or write those GPIO values require waiting to
  get to the head of a queue to transmit a command and get its response.
  This requires sleeping, which can't be done from inside IRQ handlers.
-
-Platforms that support this type of GPIO distinguish them from other GPIOs
-by returning nonzero from this call (which requires a valid GPIO number,
-which should have been previously allocated with gpio_request)::
-
-	int gpio_cansleep(unsigned gpio);
-
  To access such GPIOs, a different set of accessors is defined::
/* GPIO INPUT: return zero or nonzero, might sleep */
@@ -215,7 +207,6 @@ To access such GPIOs, a different set of accessors is defined::
  	/* GPIO OUTPUT, might sleep */
  	void gpio_set_value_cansleep(unsigned gpio, int value);
-
  Accessing such GPIOs requires a context which may sleep,  for example
  a threaded IRQ handler, and those accessors must be used instead of
  spinlock-safe accessors without the cansleep() name suffix.
@@ -537,7 +528,6 @@ code, which always dispatches through the gpio_chip::
#define gpio_get_value __gpio_get_value
    #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
Fancier implementations could instead define those as inline functions with
  logic optimizing access to specific SOC-based GPIOs.  For example, if the
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index 1bddecf73670..1c939e352129 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -153,8 +153,7 @@ get/set(获取/设置)函数调用没法返回错误,且有可能是配置错误
  大多数 GPIO 控制器可以通过内存读/写指令来访问。这些指令不会休眠,可以
  安全地在硬(非线程)中断例程和类似的上下文中完成。
-对于那些用 gpio_cansleep()测试总是返回失败的 GPIO(见下文),使用
-以下的函数访问::
+对于那些 GPIO,使用 以下的函数访问::
对于那些 GPIO,使用以下的函数访问::
/* GPIO 输入:返回零或非零 */
  	int gpio_get_value(unsigned gpio);
@@ -186,11 +185,6 @@ GPIO值是布尔值,零表示低电平,非零表示高电平。当读取一
  GPIO 值的命令需要等待其信息排到队首才发送命令,再获得其反馈。期间需要
  休眠,这不能在 IRQ 例程(中断上下文)中执行。
-支持此类 GPIO 的平台通过以下函数返回非零值来区分出这种 GPIO。(此函数需要
-一个之前通过 gpio_request 分配到的有效 GPIO 编号)::
-
-	int gpio_cansleep(unsigned gpio);
-
  为了访问这种 GPIO,内核定义了一套不同的函数::
/* GPIO 输入:返回零或非零 ,可能会休眠 */
@@ -199,7 +193,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令,再获得其
  	/* GPIO 输出,可能会休眠 */
  	void gpio_set_value_cansleep(unsigned gpio, int value);
-
  访问这样的 GPIO 需要一个允许休眠的上下文,例如线程 IRQ 处理例程,并用以上的
  访问函数替换那些没有 cansleep()后缀的自旋锁安全访问函数。
@@ -483,8 +476,8 @@ GPIO 实现者的框架(可选) 为了支持这个框架,一个平台的 Kconfig 文件将会 "select"(选择)
  ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB,并让它的
-<asm/gpio.h> 包含 <asm-generic/gpio.h>,同时定义三个方法:
-gpio_get_value()、gpio_set_value()和 gpio_cansleep()。
+<asm/gpio.h> 包含 <asm-generic/gpio.h>,同时定义二个方法:
<asm/gpio.h> 包含 <asm-generic/gpio.h>,同时定义两个方法:
+gpio_get_value()、gpio_set_value()。
它也应提供一个 ARCH_NR_GPIOS 的定义值,这样可以更好地反映该平台 GPIO
  的实际数量,节省静态表的空间。(这个定义值应该包含片上系统内建 GPIO 和
@@ -502,7 +495,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB 意味着 gpiolib 核心默认关闭,且用户可以
#define gpio_get_value __gpio_get_value
    #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
这些定义可以用更理想的实现方法替代,那就是使用经过逻辑优化的内联函数来访问
  基于特定片上系统的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量“12”,
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index 66bc7f2bbe53..6d5188109f9f 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -161,8 +161,7 @@ get/set(獲取/設置)函數調用沒法返回錯誤,且有可能是配置錯誤
  大多數 GPIO 控制器可以通過內存讀/寫指令來訪問。這些指令不會休眠,可以
  安全地在硬(非線程)中斷例程和類似的上下文中完成。
-對於那些用 gpio_cansleep()測試總是返回失敗的 GPIO(見下文),使用
-以下的函數訪問:
+對於那些 GPIO,使用 以下的函數訪問:
對於那些 GPIO,使用以下的函數訪問:
/* GPIO 輸入:返回零或非零 */
  	int gpio_get_value(unsigned gpio);
@@ -193,11 +192,6 @@ GPIO值是布爾值,零表示低電平,非零表示高電平。當讀取一
  GPIO 值的命令需要等待其信息排到隊首才發送命令,再獲得其反饋。期間需要
  休眠,這不能在 IRQ 例程(中斷上下文)中執行。
-支持此類 GPIO 的平台通過以下函數返回非零值來區分出這種 GPIO。(此函數需要
-一個之前通過 gpio_request 分配到的有效 GPIO 編號):
-
-	int gpio_cansleep(unsigned gpio);
-
  爲了訪問這種 GPIO,內核定義了一套不同的函數:
/* GPIO 輸入:返回零或非零 ,可能會休眠 */
@@ -206,7 +200,6 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令,再獲得其
  	/* GPIO 輸出,可能會休眠 */
  	void gpio_set_value_cansleep(unsigned gpio, int value);
-
  訪問這樣的 GPIO 需要一個允許休眠的上下文,例如線程 IRQ 處理例程,並用以上的
  訪問函數替換那些沒有 cansleep()後綴的自旋鎖安全訪問函數。
@@ -449,8 +442,8 @@ GPIO 實現者的框架 (可選)
  -------
  爲了支持這個框架,一個平台的 Kconfig 文件將會 "select"(選擇)
  ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB,並讓它的
-<asm/gpio.h> 包含 <asm-generic/gpio.h>,同時定義三個方法:
-gpio_get_value()、gpio_set_value()和 gpio_cansleep()。
+<asm/gpio.h> 包含 <asm-generic/gpio.h>,同時定義兩個方法:
+gpio_get_value()、gpio_set_value()。
它也應提供一個 ARCH_NR_GPIOS 的定義值,這樣可以更好地反映該平台 GPIO
  的實際數量,節省靜態表的空間。(這個定義值應該包含片上系統內建 GPIO 和
@@ -468,7 +461,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB 意味著 gpiolib 核心默認關閉,且用戶可以
#define gpio_get_value __gpio_get_value
    #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
這些定義可以用更理想的實現方法替代,那就是使用經過邏輯優化的內聯函數來訪問
  基於特定片上系統的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量「12」,

Thanks,

Yanteng

diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
index 2cefe8445980..7abd322c019f 100644
--- a/arch/m68k/include/asm/mcfgpio.h
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -34,14 +34,6 @@ static inline void __gpio_set_value(unsigned gpio, int value)
  		__mcfgpio_set_value(gpio, value);
  }
-static inline int __gpio_cansleep(unsigned gpio)
-{
-	if (gpio < MCFGPIO_PIN_MAX)
-		return 0;
-	else
-		return -EINVAL;
-}
-
  static inline int __gpio_to_irq(unsigned gpio)
  {
  	return -EINVAL;
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index adde1fa5097e..82bc2766e2ec 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -500,11 +500,6 @@ static inline int alchemy_gpio_is_valid(int gpio)
  		alchemy_gpio1_is_valid(gpio);
  }
-static inline int alchemy_gpio_cansleep(int gpio)
-{
-	return 0;	/* Alchemy never gets tired */
-}
-
  static inline int alchemy_gpio_to_irq(int gpio)
  {
  	return (gpio >= ALCHEMY_GPIO2_BASE) ?
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
index d16add7ba49d..43d44f384f97 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -98,11 +98,6 @@ static inline int au1300_gpio_is_valid(unsigned int gpio)
  	return ret;
  }
-static inline int au1300_gpio_cansleep(unsigned int gpio)
-{
-	return 0;
-}
-
  /* hardware remembers gpio 0-63 levels on powerup */
  static inline int au1300_gpio_getinitlvl(unsigned int gpio)
  {
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 88efac969754..7ecc25c543ce 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -108,11 +108,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
  	return gpiod_set_raw_value(gpio_to_desc(gpio), value);
  }
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return gpiod_cansleep(gpio_to_desc(gpio));
-}
-
  static inline int gpio_to_irq(unsigned gpio)
  {
  	return gpiod_to_irq(gpio_to_desc(gpio));
@@ -195,13 +190,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
  	WARN_ON(1);
  }
-static inline int gpio_cansleep(unsigned gpio)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return 0;
-}
-
  static inline int gpio_get_value_cansleep(unsigned gpio)
  {
  	/* GPIO can never have been requested or set as {in,out}put */




[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux