The goldfish device always uses the same endianness as the architecture using it: https://android.googlesource.com/platform/external/qemu/+/refs/heads/emu-master-dev/hw/timer/goldfish_timer.c#177 On a big-endian machine, the device is also big-endian, on a little-endian machine the device is little-endian. So we need to use the right accessor to read/write values to the goldfish registers: ioread32()/iowrite32() on a little-endian machine, ioread32be()/iowrite32be() on a big-endian machine. This patch introduces goldfish_ioread32()/goldfish_iowrite32() that uses the expected accessor according to the machine endianness. Signed-off-by: Laurent Vivier <laurent@xxxxxxxxx> --- drivers/rtc/rtc-goldfish.c | 39 +++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/rtc/rtc-goldfish.c b/drivers/rtc/rtc-goldfish.c index 7ab95d052644..b0cae4729b03 100644 --- a/drivers/rtc/rtc-goldfish.c +++ b/drivers/rtc/rtc-goldfish.c @@ -23,6 +23,15 @@ #define TIMER_ALARM_STATUS 0x18 #define TIMER_CLEAR_INTERRUPT 0x1c +/* goldfish endianness depends on CPU endianness */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define goldfish_ioread32 ioread32be +#define goldfish_iowrite32 iowrite32be +#else +#define goldfish_ioread32 ioread32 +#define goldfish_iowrite32 iowrite32 +#endif + struct goldfish_rtc { void __iomem *base; int irq; @@ -41,8 +50,8 @@ static int goldfish_rtc_read_alarm(struct device *dev, rtcdrv = dev_get_drvdata(dev); base = rtcdrv->base; - rtc_alarm_low = readl(base + TIMER_ALARM_LOW); - rtc_alarm_high = readl(base + TIMER_ALARM_HIGH); + rtc_alarm_low = goldfish_ioread32(base + TIMER_ALARM_LOW); + rtc_alarm_high = goldfish_ioread32(base + TIMER_ALARM_HIGH); rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low; do_div(rtc_alarm, NSEC_PER_SEC); @@ -50,7 +59,7 @@ static int goldfish_rtc_read_alarm(struct device *dev, rtc_time64_to_tm(rtc_alarm, &alrm->time); - if (readl(base + TIMER_ALARM_STATUS)) + if (goldfish_ioread32(base + TIMER_ALARM_STATUS)) alrm->enabled = 1; else alrm->enabled = 0; @@ -71,18 +80,18 @@ static int goldfish_rtc_set_alarm(struct device *dev, if (alrm->enabled) { rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC; - writel((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH); - writel(rtc_alarm64, base + TIMER_ALARM_LOW); - writel(1, base + TIMER_IRQ_ENABLED); + goldfish_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH); + goldfish_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW); + goldfish_iowrite32(1, base + TIMER_IRQ_ENABLED); } else { /* * if this function was called with enabled=0 * then it could mean that the application is * trying to cancel an ongoing alarm */ - rtc_status_reg = readl(base + TIMER_ALARM_STATUS); + rtc_status_reg = goldfish_ioread32(base + TIMER_ALARM_STATUS); if (rtc_status_reg) - writel(1, base + TIMER_CLEAR_ALARM); + goldfish_iowrite32(1, base + TIMER_CLEAR_ALARM); } return 0; @@ -98,9 +107,9 @@ static int goldfish_rtc_alarm_irq_enable(struct device *dev, base = rtcdrv->base; if (enabled) - writel(1, base + TIMER_IRQ_ENABLED); + goldfish_iowrite32(1, base + TIMER_IRQ_ENABLED); else - writel(0, base + TIMER_IRQ_ENABLED); + goldfish_iowrite32(0, base + TIMER_IRQ_ENABLED); return 0; } @@ -110,7 +119,7 @@ static irqreturn_t goldfish_rtc_interrupt(int irq, void *dev_id) struct goldfish_rtc *rtcdrv = dev_id; void __iomem *base = rtcdrv->base; - writel(1, base + TIMER_CLEAR_INTERRUPT); + goldfish_iowrite32(1, base + TIMER_CLEAR_INTERRUPT); rtc_update_irq(rtcdrv->rtc, 1, RTC_IRQF | RTC_AF); @@ -128,8 +137,8 @@ static int goldfish_rtc_read_time(struct device *dev, struct rtc_time *tm) rtcdrv = dev_get_drvdata(dev); base = rtcdrv->base; - time_low = readl(base + TIMER_TIME_LOW); - time_high = readl(base + TIMER_TIME_HIGH); + time_low = goldfish_ioread32(base + TIMER_TIME_LOW); + time_high = goldfish_ioread32(base + TIMER_TIME_HIGH); time = (time_high << 32) | time_low; do_div(time, NSEC_PER_SEC); @@ -149,8 +158,8 @@ static int goldfish_rtc_set_time(struct device *dev, struct rtc_time *tm) base = rtcdrv->base; now64 = rtc_tm_to_time64(tm) * NSEC_PER_SEC; - writel((now64 >> 32), base + TIMER_TIME_HIGH); - writel(now64, base + TIMER_TIME_LOW); + goldfish_iowrite32((now64 >> 32), base + TIMER_TIME_HIGH); + goldfish_iowrite32(now64, base + TIMER_TIME_LOW); return 0; } -- 2.34.1
