Revisit support for the 100 Mbit APNE PCMCIA card variants, again. Add a new ISA type for these cards, and switch to that type from the APNE probe code in case 16 bit IO support is noted the PCMCIA config table data. A module parameter or kernel can be used to enable 16 bit IO as a fallback option. Support for the 16 bit 10/100 Mbit cards is now included by default. The first two patches enable the use of core PCMCIA code to parse config table entries. The remaining two patches add 16 bit IO support to the m68k low-level IO access code, and switch the APNE driver to use 16 bit IO on cards that support it (the 100 Mbit cards). I'm in two minds about enabling CONFIG_PCMCIA - the alternative is to duplicate the cftable parser in amiga/pcmcia.c (which has been tested and works just as well). Feedback welcome. Tested by Alex on a 100 Mbit card. Not yet tested on 10 Mbit cards - if any of those also have the 16 bit IO feature set in their config table, this patch series would break on those cards. Note that only patch 4 has been sent to netdev. Please CC linux-m68k when providing comments. Cheers, Michael
