On Sun, 6 Jun 2021, Michael Schmitz wrote:
This patch to io_mm.h (on top of my current patch), plus setting isa_type to
ISA_TPYE_AG100 using a module parameter, should do the trick:
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index f6b487b..6f79a5e 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -102,6 +102,11 @@
#define ISA_TYPE_AG (2)
#define ISA_TYPE_ENEC (3)
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+#define ISA_TYPE_AG100 (4) /* for 100 MBit APNE card */
IMHO this would be simpler if that #define was unconditional like the
others.
+#define MULTI_ISA 1
Hmm...
+#endif
+
#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
#define ISA_TYPE ISA_TYPE_Q40
#define ISA_SEX 0
@@ -135,6 +140,9 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
#ifdef CONFIG_Q40
case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
#endif
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+ case ISA_TYPE_AG100: fallthrough;
+#endif
I wonder whether that 'fallthrough' is needed. One would hope not...
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
@@ -153,6 +161,9 @@ static inline u16 __iomem *isa_itw(unsigned long addr)
#ifdef CONFIG_Q40
case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
#endif
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+ case ISA_TYPE_AG100: fallthrough;
+#endif
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
@@ -168,6 +179,9 @@ static inline u32 __iomem *isa_itl(unsigned long addr)
{
switch(ISA_TYPE)
{
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+ case ISA_TYPE_AG100: fallthrough;
+#endif
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
#endif
@@ -181,6 +195,9 @@ static inline u8 __iomem *isa_mtb(unsigned long addr)
#ifdef CONFIG_Q40
case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
#endif
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+ case ISA_TYPE_AG100: fallthrough;
+#endif
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
@@ -199,6 +216,9 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
#ifdef CONFIG_Q40
case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
#endif
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+ case ISA_TYPE_AG100: fallthrough;
+#endif
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
@@ -219,6 +239,11 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) :
out_le16(isa_itw(port),(val)))
#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) :
out_le32(isa_itl(port),(val)))
+#if defined(CONFIG_AMIGA_PCMCIA_100)
+#undef isa_inb
+#define isa_inb(port) ((ISA_TYPE == ISA_TYPE_AG100) ? ((port) & 1 ?
isa_inw((port) - 1) & 0xff : isa_inw(port) >> 8) : in_8(isa_itb(port))
+#endif
+
Would (port & ~1) be faster than (port - 1) here?
Also, I don't think you need '#if defined' here. When
!defined(CONFIG_AMIGA_PCMCIA_100), I think ISA_TYPE should be a
compile-time constant 0, and the dead code will get tossed out anyway.
#define isa_readb(p) in_8(isa_mtb((unsigned long)(p)))
#define isa_readw(p) \
(ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
(linebreak-mangled, sorry).
The card reset patch hunk from Alex' patch can probably go into the APNE
driver regardless?
It's been quite a while - can you still try and build/test this change, Alex?
Note that isa_type is never assigned to ISA_TYPE_AG100 in
arch/m68k/kernel/setup_mm.c which means (IIUC) this patch won't take
effect with MULTI_ISA == 1.
