Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/26/21 9:37 AM, Finn Thain wrote:> If you enable CONFIG_IDE and CONFIG_BLK_DEV_PLATFORM, Quadras and 
Powerbooks will use the kernel/drivers/ide/ide_platform.ko module.

If you enable CONFIG_ATA and CONFIG_PATA_PLATFORM, Quadras and
Powerbooks will use the kernel/drivers/ata/pata_platform.ko module.

(If you enable all of the above, you may need to use a blacklist to ensure 
that the preferred driver module gets loaded.)

Was macide the only IDE driver in Debian/m68k kernels without a libata 
alternative? If so, this patch would allow you to finally drop CONFIG_IDE.

That's great to hear. It means that systems using the Mac IDE drivers will
survive the legacy IDE removal if it ever comes.

So, thanks a lot for addressing this!

Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@xxxxxxxxxx
`. `'   Freie Universitaet Berlin - glaubitz@xxxxxxxxxxxxxxxxxxx
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913



[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux