On 07.08.2018 14:14, Krzysztof Kozlowski wrote:
On 7 August 2018 at 10:08, Stefan Agner <stefan@xxxxxxxx> wrote:
On 03.08.2018 21:32, Angelo Dureghello wrote:
This patch adds a new fsl-edma-common module to allow new
mcf-edma module code to use most of the fsl-edma code.
Signed-off-by: Angelo Dureghello <angelo@xxxxxxxx>
---
Changes for v2:
- patch splitted into 4
- add mcf-edma as minimal different parts from fsl-edma
Changes for v3:
none
Changes for v4:
- patch simplified from 4/4 into 2/2
- collecting all the mcf-edma-related changes
Changes for v5:
none
Changes for v6:
- adjusted comment header
- fixed bit shift with BIT()
- we need to free the interrupts at remove(), so removed all devm_
interrupt related calls
Changes for v7:
none
Changes for v8:
- patch rewritten from scratch, splitted into 3, common code isolated,
minimal changes from the original Freescale code have been done.
The patch has been tested with both Iris + Colibri Vybrid VF50 and
stmark2/mcf54415 Coldfire boards.
---
drivers/dma/Makefile | 2 +-
drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
drivers/dma/fsl-edma-common.h | 196 ++++++++++
drivers/dma/fsl-edma.c | 697 +---------------------------------
4 files changed, 774 insertions(+), 697 deletions(-)
create mode 100644 drivers/dma/fsl-edma-common.c
create mode 100644 drivers/dma/fsl-edma-common.h
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 203a99d68315..66022f59fca4 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
obj-$(CONFIG_DW_DMAC_CORE) += dw/
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
-obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
+obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
obj-$(CONFIG_FSL_RAID) += fsl_raid.o
obj-$(CONFIG_HSU_DMA) += hsu/
obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
new file mode 100644
index 000000000000..0ae7094f477a
--- /dev/null
+++ b/drivers/dma/fsl-edma-common.c
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
+// Copyright (c) 2017 Sysam, Angelo Dureghello <angelo@xxxxxxxx>
+
+#include <linux/dmapool.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "fsl-edma-common.h"
+
+/*
+ * R/W functions for big- or little-endian registers:
+ * The eDMA controller's endian is independent of the CPU core's endian.
+ * For the big-endian IP module, the offset for 8-bit or 16-bit registers
+ * should also be swapped opposite to that in little-endian IP.
+ */
+u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
+{
+ if (edma->big_endian)
+ return ioread32be(addr);
+ else
+ return ioread32(addr);
+}
+EXPORT_SYMBOL_GPL(edma_readl);
In 3/3 you link the common object into the two modules individually:
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
Therefor you do not access those functions from another module (they are
within the module). No exporting should be necessary. Drop all those
exports.
The fsl-edma-common will be its own module so the exports are
necessary for proper linking/modpost.
Hm, oh I see, I got that wrong.
We could use
fsl-edma-all-y = fsl-edma.o fsl-edma-common.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma-all.o
mcf-edma-all-y = mcf-edma.o fsl-edma-common.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma-all.o
to create two modules but that duplicates some code. It probably
wouldn't matter in practise since the two IPs are used on different
architecture...
However, if we stay with the three modules approach, we should introduce
a hidden config symbol, e.g.
config FSL_EDMA_COMMON
tristate
In FSL_EDMA/MCF_EDMA use
select FSL_EDMA_COMMON
And in the Makefile
obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
However, I do not like that the compiler can no longer inline simple
acesors like edma_(readl|writel). So if we stay with the three modules
approach then move at least the accesors and
to_fsl_edma_chan/to_fsl_edma_desc as inline functions to the header
file.
--
Stefan
Best regards,
Krzysztof
If possible I would prefer if you start with cleanup/conversions, then
split-up and finally add functionality.
So ideally:
1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
2. Split
3. Add EDMA macros etc.
4. Add ColdFire mcf5441x edma support
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
