The mac8390 driver defines its own variants of memcpy_fromio() and
memcpy_toio(), using similar implementations, but different function
signatures.
Remove the custom definitions of memcpy_fromio() and memcpy_toio(), and
adjust all callers to the standard signatures.
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Acked-by: David S. Miller <davem@xxxxxxxxxxxxx>
---
This is a dependency for "m68k: Move mem*io define guards to
<asm/kmap.h>".
Untested on real hardware, assembler output compared.
v2:
- Add Acked-by.
---
drivers/net/ethernet/8390/mac8390.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
index b6d735bf80117e27..342ae08ec3c29832 100644
--- a/drivers/net/ethernet/8390/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -153,9 +153,6 @@ static void dayna_block_input(struct net_device *dev, int count,
static void dayna_block_output(struct net_device *dev, int count,
const unsigned char *buf, int start_page);
-#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
-
#define memcmp_withio(a, b, c) memcmp((a), (void *)(b), (c))
/* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
@@ -239,7 +236,7 @@ static enum mac8390_access mac8390_testio(unsigned long membase)
unsigned long outdata = 0xA5A0B5B0;
unsigned long indata = 0x00000000;
/* Try writing 32 bits */
- memcpy_toio(membase, &outdata, 4);
+ memcpy_toio((void __iomem *)membase, &outdata, 4);
/* Now compare them */
if (memcmp_withio(&outdata, membase, 4) == 0)
return ACCESS_32;
@@ -711,7 +708,7 @@ static void sane_get_8390_hdr(struct net_device *dev,
struct e8390_pkt_hdr *hdr, int ring_page)
{
unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
- memcpy_fromio(hdr, dev->mem_start + hdr_start, 4);
+ memcpy_fromio(hdr, (void __iomem *)dev->mem_start + hdr_start, 4);
/* Fix endianness */
hdr->count = swab16(hdr->count);
}
@@ -725,13 +722,16 @@ static void sane_block_input(struct net_device *dev, int count,
if (xfer_start + count > ei_status.rmem_end) {
/* We must wrap the input move. */
int semi_count = ei_status.rmem_end - xfer_start;
- memcpy_fromio(skb->data, dev->mem_start + xfer_base,
+ memcpy_fromio(skb->data,
+ (void __iomem *)dev->mem_start + xfer_base,
semi_count);
count -= semi_count;
- memcpy_fromio(skb->data + semi_count, ei_status.rmem_start,
- count);
+ memcpy_fromio(skb->data + semi_count,
+ (void __iomem *)ei_status.rmem_start, count);
} else {
- memcpy_fromio(skb->data, dev->mem_start + xfer_base, count);
+ memcpy_fromio(skb->data,
+ (void __iomem *)dev->mem_start + xfer_base,
+ count);
}
}
@@ -740,7 +740,7 @@ static void sane_block_output(struct net_device *dev, int count,
{
long shmem = (start_page - WD_START_PG)<<8;
- memcpy_toio(dev->mem_start + shmem, buf, count);
+ memcpy_toio((void __iomem *)dev->mem_start + shmem, buf, count);
}
/* dayna block input/output */
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
