On 22-06-18, 11:44, Angelo Dureghello wrote:
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
+obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
that makes kernel have two copies of common.o one in thsi driver and one
in previous one why not do:
CONFIG_FSL_COMMON += fsl-edma-common.o
CONFIG_FSL_EDMA += fsl-edma.o
CONFIG_MCF_EDMA += mcf-edma.o
and you select CONFIG_FSL_COMMON in both FSL and MCF Kconfig?
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
+// Copyright (c) 2017 Sysam, Angelo Dureghello <angelo@xxxxxxxx>
+/*
+ * drivers/dma/mcf-edma.c
+ *
+ * Driver for the Freescale ColdFire 64-ch eDMA implementation,
+ * derived from drivers/dma/fsl-edma.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
again, no need for text
+static irqreturn_t mcf_edma_tx_handler(int irq, void *dev_id)
+{
+ struct fsl_edma_engine *mcf_edma = dev_id;
+ struct edma_regs *regs = &mcf_edma->regs;
+ unsigned int ch;
+ struct fsl_edma_chan *mcf_chan;
+ u64 intmap;
+
+ intmap = ioread32(regs->inth);
+ intmap <<= 32;
+ intmap |= ioread32(regs->intl);
+ if (!intmap)
+ return IRQ_NONE;
+
+ for (ch = 0; ch < mcf_edma->n_chans; ch++) {
+ if (intmap & (0x1 << ch)) {
intmap & BIT(ch)
+static irqreturn_t mcf_edma_err_handler(int irq, void *dev_id)
+{
+ struct fsl_edma_engine *mcf_edma = dev_id;
+ struct edma_regs *regs = &mcf_edma->regs;
+ unsigned int err, ch;
+
+ err = ioread32(regs->errl);
+ if (!err)
+ return IRQ_NONE;
+
+ for (ch = 0; ch < (EDMA_CHANNELS / 2); ch++) {
+ if (err & (0x1 << ch)) {
here as well
+static int mcf_edma_remove(struct platform_device *pdev)
+{
+ struct fsl_edma_engine *mcf_edma = platform_get_drvdata(pdev);
+
+ fsl_edma_cleanup_vchan(&mcf_edma->dma_dev);
+ dma_async_device_unregister(&mcf_edma->dma_dev);
at this point your irqs are still registered and running. You vchan
tasklet maybe still pending to be eecuted and can be scheduled again
+static int __init mcf_edma_init(void)
+{
+ return platform_driver_register(&mcf_edma_driver);
+}
+subsys_initcall(mcf_edma_init);
why subsys_initcall?
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
