All the ColdFire IO access support code has been moved to io_no.h.
This means that all ColdFire support is at least now consistent no
matter whether the MMU is enabled or not for them.
Now that io_mm.h has reverted to only support the traditional m68k MMU
enabled processors we can remove the ColdFire specific definitions.
We can also remove the old ColdFire PCI bus IO access functions.
The new io_no.h uses asm-generic/io.h to provide all the basic support.
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxxxxx>
Reviewed-by: Angelo Dureghello <angelo@xxxxxxxx>
---
arch/m68k/coldfire/pci.c | 99 ++-----------------------------------------
arch/m68k/include/asm/io_mm.h | 51 +---------------------
2 files changed, 5 insertions(+), 145 deletions(-)
v2: rebase to v4.17-rc1
fix compilation warnings
drop read/write iomem() conversions
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 3097fa2..db709ad 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -23,20 +23,10 @@
/*
* Memory and IO mappings. We use a 1:1 mapping for local host memory to
- * PCI bus memory (no reason not to really). IO space doesn't matter, we
- * always use access functions for that. The device configuration space is
- * mapped over the IO map space when we enable it in the PCICAR register.
+ * PCI bus memory (no reason not to really). IO space is mapped in its own
+ * separate address region. The device configuration space is mapped over
+ * the IO map space when we enable it in the PCICAR register.
*/
-#define PCI_MEM_PA 0xf0000000 /* Host physical address */
-#define PCI_MEM_BA 0xf0000000 /* Bus physical address */
-#define PCI_MEM_SIZE 0x08000000 /* 128 MB */
-#define PCI_MEM_MASK (PCI_MEM_SIZE - 1)
-
-#define PCI_IO_PA 0xf8000000 /* Host physical address */
-#define PCI_IO_BA 0x00000000 /* Bus physical address */
-#define PCI_IO_SIZE 0x00010000 /* 64k */
-#define PCI_IO_MASK (PCI_IO_SIZE - 1)
-
static struct pci_bus *rootbus;
static unsigned long iospace;
@@ -144,89 +134,6 @@ static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
};
/*
- * IO address space access functions. Pretty strait forward, these are
- * directly mapped in to the IO mapping window. And that is mapped into
- * virtual address space.
- */
-u8 mcf_pci_inb(u32 addr)
-{
- return __raw_readb(iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_inb);
-
-u16 mcf_pci_inw(u32 addr)
-{
- return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK)));
-}
-EXPORT_SYMBOL(mcf_pci_inw);
-
-u32 mcf_pci_inl(u32 addr)
-{
- return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK)));
-}
-EXPORT_SYMBOL(mcf_pci_inl);
-
-void mcf_pci_insb(u32 addr, u8 *buf, u32 len)
-{
- for (; len; len--)
- *buf++ = mcf_pci_inb(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insb);
-
-void mcf_pci_insw(u32 addr, u16 *buf, u32 len)
-{
- for (; len; len--)
- *buf++ = mcf_pci_inw(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insw);
-
-void mcf_pci_insl(u32 addr, u32 *buf, u32 len)
-{
- for (; len; len--)
- *buf++ = mcf_pci_inl(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insl);
-
-void mcf_pci_outb(u8 v, u32 addr)
-{
- __raw_writeb(v, iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outb);
-
-void mcf_pci_outw(u16 v, u32 addr)
-{
- __raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outw);
-
-void mcf_pci_outl(u32 v, u32 addr)
-{
- __raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outl);
-
-void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len)
-{
- for (; len; len--)
- mcf_pci_outb(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsb);
-
-void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len)
-{
- for (; len; len--)
- mcf_pci_outw(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsw);
-
-void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len)
-{
- for (; len; len--)
- mcf_pci_outl(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsl);
-
-/*
* Initialize the PCI bus registers, and scan the bus.
*/
static struct resource mcf_pci_mem = {
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 21fba26..fe485f4 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -86,53 +86,7 @@
#endif /* ATARI_ROM_ISA */
-#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)
-
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET 0
-#define PIO_MASK 0xffff
-#define PIO_RESERVED 0x10000
-
-u8 mcf_pci_inb(u32 addr);
-u16 mcf_pci_inw(u32 addr);
-u32 mcf_pci_inl(u32 addr);
-void mcf_pci_insb(u32 addr, u8 *buf, u32 len);
-void mcf_pci_insw(u32 addr, u16 *buf, u32 len);
-void mcf_pci_insl(u32 addr, u32 *buf, u32 len);
-
-void mcf_pci_outb(u8 v, u32 addr);
-void mcf_pci_outw(u16 v, u32 addr);
-void mcf_pci_outl(u32 v, u32 addr);
-void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len);
-void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len);
-void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
-
-#define inb mcf_pci_inb
-#define inb_p mcf_pci_inb
-#define inw mcf_pci_inw
-#define inw_p mcf_pci_inw
-#define inl mcf_pci_inl
-#define inl_p mcf_pci_inl
-#define insb mcf_pci_insb
-#define insw mcf_pci_insw
-#define insl mcf_pci_insl
-
-#define outb mcf_pci_outb
-#define outb_p mcf_pci_outb
-#define outw mcf_pci_outw
-#define outw_p mcf_pci_outw
-#define outl mcf_pci_outl
-#define outl_p mcf_pci_outl
-#define outsb mcf_pci_outsb
-#define outsw mcf_pci_outsw
-#define outsl mcf_pci_outsl
-
-#define readb(addr) in_8(addr)
-#define writeb(v, addr) out_8((addr), (v))
-#define readw(addr) in_le16(addr)
-#define writew(v, addr) out_le16((addr), (v))
-
-#elif defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA)
+#if defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA)
#if MULTI_ISA == 0
#undef MULTI_ISA
@@ -415,8 +369,7 @@ static inline void isa_delay(void)
#define writew(val, addr) out_le16((addr), (val))
#endif /* CONFIG_ATARI_ROM_ISA */
-#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) && \
- !(defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE))
+#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
/*
* We need to define dummy functions for GENERIC_IOMAP support.
*/
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
