This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
drivers/scsi/Kconfig | 8 ---
drivers/scsi/Makefile | 1 -
drivers/scsi/mvme147.c | 151 -------------------------------------------------
drivers/scsi/mvme147.h | 25 --------
drivers/scsi/wd33c93.c | 5 --
5 files changed, 190 deletions(-)
delete mode 100644 drivers/scsi/mvme147.c
delete mode 100644 drivers/scsi/mvme147.h
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 11e89e56b865..a95084008fe0 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1390,14 +1390,6 @@ config SCSI_MAC_ESP
To compile this driver as a module, choose M here: the module
will be called mac_esp.
-config MVME147_SCSI
- bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI=y
- select SCSI_SPI_ATTRS
- help
- Support for the on-board SCSI controller on the Motorola MVME147
- single-board computer.
-
config MVME16x_SCSI
tristate "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index d5135efbf9cd..9575f291acda 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -51,7 +51,6 @@ obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
-obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
deleted file mode 100644
index e6b2b681fda3..000000000000
--- a/drivers/scsi/mvme147.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mvme147hw.h>
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "wd33c93.h"
-#include "mvme147.h"
-
-#include <linux/stat.h>
-
-
-static irqreturn_t mvme147_intr(int irq, void *data)
-{
- struct Scsi_Host *instance = data;
-
- if (irq == MVME147_IRQ_SCSI_PORT)
- wd33c93_intr(instance);
- else
- m147_pcc->dma_intr = 0x89; /* Ack and enable ints */
- return IRQ_HANDLED;
-}
-
-static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
-{
- struct Scsi_Host *instance = cmd->device->host;
- struct WD33C93_hostdata *hdata = shost_priv(instance);
- unsigned char flags = 0x01;
- unsigned long addr = virt_to_bus(cmd->SCp.ptr);
-
- /* setup dma direction */
- if (!dir_in)
- flags |= 0x04;
-
- /* remember direction */
- hdata->dma_dir = dir_in;
-
- if (dir_in) {
- /* invalidate any cache */
- cache_clear(addr, cmd->SCp.this_residual);
- } else {
- /* push any dirty cache */
- cache_push(addr, cmd->SCp.this_residual);
- }
-
- /* start DMA */
- m147_pcc->dma_bcr = cmd->SCp.this_residual | (1 << 24);
- m147_pcc->dma_dadr = addr;
- m147_pcc->dma_cntrl = flags;
-
- /* return success */
- return 0;
-}
-
-static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
- int status)
-{
- m147_pcc->dma_cntrl = 0;
-}
-
-int mvme147_detect(struct scsi_host_template *tpnt)
-{
- static unsigned char called = 0;
- struct Scsi_Host *instance;
- wd33c93_regs regs;
- struct WD33C93_hostdata *hdata;
-
- if (!MACH_IS_MVME147 || called)
- return 0;
- called++;
-
- tpnt->proc_name = "MVME147";
- tpnt->show_info = wd33c93_show_info,
- tpnt->write_info = wd33c93_write_info,
-
- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (!instance)
- goto err_out;
-
- instance->base = 0xfffe4000;
- instance->irq = MVME147_IRQ_SCSI_PORT;
- regs.SASR = (volatile unsigned char *)0xfffe4000;
- regs.SCMD = (volatile unsigned char *)0xfffe4001;
- hdata = shost_priv(instance);
- hdata->no_sync = 0xff;
- hdata->fast = 0;
- hdata->dma_mode = CTRL_DMA;
- wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
-
- if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
- "MVME147 SCSI PORT", instance))
- goto err_unregister;
- if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
- "MVME147 SCSI DMA", instance))
- goto err_free_irq;
-#if 0 /* Disabled; causes problems booting */
- m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */
- udelay(100);
- m147_pcc->scsi_interrupt = 0x00; /* Negate SCSI bus reset */
- udelay(2000);
- m147_pcc->scsi_interrupt = 0x40; /* Clear bus reset interrupt */
-#endif
- m147_pcc->scsi_interrupt = 0x09; /* Enable interrupt */
-
- m147_pcc->dma_cntrl = 0x00; /* ensure DMA is stopped */
- m147_pcc->dma_intr = 0x89; /* Ack and enable ints */
-
- return 1;
-
-err_free_irq:
- free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
-err_unregister:
- scsi_unregister(instance);
-err_out:
- return 0;
-}
-
-static struct scsi_host_template driver_template = {
- .proc_name = "MVME147",
- .name = "MVME147 built-in SCSI",
- .detect = mvme147_detect,
- .release = mvme147_release,
- .queuecommand = wd33c93_queuecommand,
- .eh_abort_handler = wd33c93_abort,
- .eh_host_reset_handler = wd33c93_host_reset,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-int mvme147_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- /* XXX Make sure DMA is stopped! */
- free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
- free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr);
-#endif
- return 1;
-}
diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h
deleted file mode 100644
index f75ff58ddcd0..000000000000
--- a/drivers/scsi/mvme147.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MVME147_H
-
-/* $Id: mvme147.h,v 1.4 1997/01/19 23:07:10 davem Exp $
- *
- * Header file for the MVME147 built-in SCSI controller for Linux
- *
- * Written and (C) 1993, Hamish Macdonald, see mvme147.c for more info
- *
- */
-
-#include <linux/types.h>
-
-int mvme147_detect(struct scsi_host_template *);
-int mvme147_release(struct Scsi_Host *);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
-#endif /* MVME147_H */
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 74be04f2357c..00a53cf138d1 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1540,11 +1540,6 @@ reset_wd33c93(struct Scsi_Host *instance)
DEFAULT_SX_OFF, 0, hostdata->sx_table));
write_wd33c93(regs, WD_COMMAND, WD_CMD_RESET);
-
-#ifdef CONFIG_MVME147_SCSI
- udelay(25); /* The old wd33c93 on MVME147 needs this, at least */
-#endif
-
while (!(read_aux_stat(regs) & ASR_INT))
;
sr = read_wd33c93(regs, WD_SCSI_STATUS);
--
2.14.2
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
