Hi Angelo, On 16/10/17 03:28, Angelo Dureghello wrote:
i was trying a file transfer with xmodem-1k and uClinux "rx" on the mcf54415 stnmark2 board side. This using a recent mainline kernel: / # cat /proc/version uClinux version 4.14.0-rc4stmark2-001-00118-g811fdbb62a9d / # So, as per xmodem-1k, i send 3 bytes header, a 1024 bytes block, and 2 bytes crc16. But "rx" timeouts waiting the block. Adding some traces to "rx", it timeouts since some bytes (5 to 10) randomly positioned in the block are not received. Of course they have been sent (scope checked).
Check if you are getting overruns on the port: cat /proc/tty/driver/mcf Regards Greg
The same 1024 bytes transfer in u-boot (y-modem) always succeed. Since mcf54415 has a 4 slots RX fifo UART, i was wondering if the mcf.c uart driver is not fast enough to read the data, or, where the "linux" limitation could be. Regards, Angelo Dureghello -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
-- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
