On 2015/1/17 7:16, Yinghai Lu wrote:
On Fri, Jan 16, 2015 at 3:15 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
On Thu, Jan 15, 2015 at 5:43 PM, Yijing Wang <wangyijing@xxxxxxxxxx> wrote:
Pci_bus_add_devices() should not be placed in pci_scan_bus().
Now pci device will be added to driver core once its
creation. All things left in pci_bus_add_devices() are
driver attachment and other trivial sysfs things.
Pci_scan_bus() should be the function responsible for
scanning PCI devices, not including driver attachment.
Other, some callers(m68k,unicore32,alpha) of pci_scan_bus()
will call pci_bus_size_bridges() and pci_bus_assign_resources()
after pci_scan_bus().
E.g.
In m68k
mcf_pci_init()
pci_scan_bus()
...
pci_bus_add_devices() --- try to attach driver
pci_fixup_irqs()
pci_bus_size_bridges()
pci_bus_assign_resources()
It is not correct, resources should be assigned correctly
before attaching driver.
No, for booting path, at that time pci drivers are *NOT* loaded yet.
Hi Yinghai, I knew code flow here would not cause problems, sorry the log
confused you, I will refresh it. But I think pci_scan_bus()/pci_scan_root_bus()
which could only be used during system boot up(before module_init) make
the pci scan logic obscure. Because most callers additionally call
pci_bus_size_bridges() and pci_bus_assign_resources() later,
so rip out pci_bus_add_devices() from pci_scan_bus()/pci_scan_root_bus()
make code have better readability.
Thanks!
Yijing.
Thanks
Yinghai
.
--
Thanks!
Yijing
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
