Add NetUSBee to users of ATARI_ROM_ISA option (thanks Geert for spotting this in randconfig builds). Add note to ATARI_USB option to alert user to enable ATARI_ROM_ISA if they want support for the NetUSBee USB driver. Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx> --- arch/m68k/Kconfig.bus | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index b473f40..a934018 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -52,8 +52,10 @@ config ATARI_ROM_ISA This option enables support for the ROM port ISA adapter used to operate ISA cards on Atari. Only 8 bit cards are supported, and no interrupt lines are connected. - The only driver currently using this adapter is the EtherNEC - driver for RTL8019AS based NE2000 compatible network cards. + The only drivers currently using this adapter are the NE2000 ISA + driver for EtherNEC (RTL8019AS based NE2000 compatible network + cards), and drivers for the NetUSBee (RTL8019AS / ISP1160 ethernet/ + USB combo card). config ATARI_USB bool "Atari USB host controller support" @@ -64,6 +66,8 @@ config ATARI_USB the EtherNAT and NetUSBee cards for Atari. You will have to select an appropriate HCD driver in the USB section (the ISP1160 one is the most commonly used one). + Support for the NetUSBee in the ISP116x host controller driver also + requires the ATARI_ROM_ISA option to be set. config GENERIC_ISA_DMA def_bool ISA -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
