Re: [PATCH 1/1] ARCH/M68K/AMIGA: convert printk to pr_foo()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CC linux-m68k

Hi Fabian

Thanks for your patch. A few comments below.

On Thu, May 1, 2014 at 9:02 AM, Fabian Frederick <fabf@xxxxxxxxx> wrote:
-no level printk converted to pr_warn/pr_info
-fixed a small identation problem

This is untested

Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Fabian Frederick <fabf@xxxxxxxxx>
---
 arch/m68k/amiga/amisound.c |  2 +-
 arch/m68k/amiga/config.c   | 20 ++++++++++----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c
index 2559eef..90a60d7 100644
--- a/arch/m68k/amiga/amisound.c
+++ b/arch/m68k/amiga/amisound.c
@@ -51,7 +51,7 @@ void __init amiga_init_sound(void)

        snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res);
        if (!snd_data) {
-               printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n");
+               pr_crit("amiga init_sound: failed to allocate chipmem\n");
                return;
        }
        memcpy (snd_data, sine_data, sizeof(sine_data));
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 9625b71..024d7f9 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -183,7 +183,7 @@ int __init amiga_parse_bootinfo(const struct bi_record *record)
                        dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
                        dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
                } else
-                       printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+                       pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
                break;

@@ -209,9 +209,9 @@ static void __init amiga_identify(void)

        memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));

-       printk("Amiga hardware found: ");
+       pr_info("Amiga hardware found: ");
        if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-               printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+               pr_info("[%s] ", amiga_models[amiga_model-AMI_500]);

This should use pr_cont(), as the previous print didn't have a trailing newline.

                strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
        }

@@ -322,7 +322,7 @@ static void __init amiga_identify(void)

 #define AMIGAHW_ANNOUNCE(name, str)            \
        if (AMIGAHW_PRESENT(name))              \
-               printk(str)
+               pr_info(str)

Llikewise.

        AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
        AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
@@ -354,8 +354,8 @@ static void __init amiga_identify(void)
        AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
        AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
        if (AMIGAHW_PRESENT(ZORRO))
-               printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-       printk("\n");
+               pr_info("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");

Likewise

+       pr_info("\n");

Likewise

 #undef AMIGAHW_ANNOUNCE
 }
@@ -424,7 +424,7 @@ void __init config_amiga(void)
                        if (m68k_memory[i].addr < 16*1024*1024) {
                                if (i == 0) {
                                        /* don't cut off the branch we're sitting on */
-                                       printk("Warning: kernel runs in Zorro II memory\n");
+                                       pr_warn("Warning: kernel runs in Zorro II memory\n");
                                        continue;
                                }
                                disabled_z2mem += m68k_memory[i].size;
@@ -435,8 +435,8 @@ void __init config_amiga(void)
                        }
                }
                if (disabled_z2mem)
-               printk("%dK of Zorro II memory will not be used as system memory\n",
-               disabled_z2mem>>10);
+                       pr_info("%dK of Zorro II memory will not be used as system memory\n",
+                               disabled_z2mem>>10);
        }

        /* request all RAM */
@@ -475,7 +475,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
        jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);

        if (request_resource(&mb_resources._ciab, &sched_res))
-               printk("Cannot allocate ciab.ta{lo,hi}\n");
+               pr_warn("Cannot allocate ciab.ta{lo,hi}\n");
        ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
        ciab.talo = jiffy_ticks % 256;
        ciab.tahi = jiffy_ticks / 256;
--
1.9.1

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux