[PATCH v2 2/5] m68k: add PCI bus support definitions for the ColdFire M54xx SoC family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Greg Ungerer <gerg@xxxxxxxxxxx>

Add all the required definitoins to support the ColdFire M54xx SoC PCI
hardware unit. These are strait out of the MCF5475 Reference Manual.

Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
 arch/m68k/include/asm/m54xxpci.h |  138 ++++++++++++++++++++++++++++++++++++++
 arch/m68k/include/asm/m54xxsim.h |    3 +
 2 files changed, 141 insertions(+), 0 deletions(-)
 create mode 100644 arch/m68k/include/asm/m54xxpci.h

diff --git a/arch/m68k/include/asm/m54xxpci.h b/arch/m68k/include/asm/m54xxpci.h
new file mode 100644
index 0000000..6fbf54f
--- /dev/null
+++ b/arch/m68k/include/asm/m54xxpci.h
@@ -0,0 +1,138 @@
+/****************************************************************************/
+
+/*
+ *	m54xxpci.h -- ColdFire 547x and 548x PCI bus support
+ *
+ *	(C) Copyright 2011,  Greg Ungerer <gerg@xxxxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/****************************************************************************/
+#ifndef	M54XXPCI_H
+#define	M54XXPCI_H
+/****************************************************************************/
+
+/*
+ *	The core set of PCI support registers are mapped into the MBAR region.
+ */
+#define	PCIIDR		(CONFIG_MBAR + 0xb00)	/* PCI device/vendor ID */
+#define	PCISCR		(CONFIG_MBAR + 0xb04)	/* PCI status/command */
+#define	PCICCRIR	(CONFIG_MBAR + 0xb08)	/* PCI class/revision */
+#define	PCICR1		(CONFIG_MBAR + 0xb0c)	/* PCI configuration 1 */
+#define	PCIBAR0		(CONFIG_MBAR + 0xb10)	/* PCI base address 0 */
+#define	PCIBAR1		(CONFIG_MBAR + 0xb14)	/* PCI base address 1 */
+#define	PCICCPR		(CONFIG_MBAR + 0xb28)	/* PCI cardbus CIS pointer */
+#define	PCISID		(CONFIG_MBAR + 0xb2c)	/* PCI subsystem IDs */
+#define	PCIERBAR	(CONFIG_MBAR + 0xb30)	/* PCI expansion ROM */
+#define	PCICPR		(CONFIG_MBAR + 0xb34)	/* PCI capabilities pointer */
+#define	PCICR2		(CONFIG_MBAR + 0xb3c)	/* PCI configuration 2 */
+
+#define	PCIGSCR		(CONFIG_MBAR + 0xb60)	/* Global status/control */
+#define	PCITBATR0	(CONFIG_MBAR + 0xb64)	/* Target base translation 0 */
+#define	PCITBATR1	(CONFIG_MBAR + 0xb68)	/* Target base translation 1 */
+#define	PCITCR		(CONFIG_MBAR + 0xb6c)	/* Target control */
+#define	PCIIW0BTAR	(CONFIG_MBAR + 0xb70)	/* Initiator window 0 */
+#define	PCIIW1BTAR	(CONFIG_MBAR + 0xb74)	/* Initiator window 1 */
+#define	PCIIW2BTAR	(CONFIG_MBAR + 0xb78)	/* Initiator window 2 */
+#define	PCIIWCR		(CONFIG_MBAR + 0xb80)	/* Initiator window config */
+#define	PCIICR		(CONFIG_MBAR + 0xb84)	/* Initiator control */
+#define	PCIISR		(CONFIG_MBAR + 0xb88)	/* Initiator status */
+#define	PCICAR		(CONFIG_MBAR + 0xbf8)	/* Configuration address */
+
+#define	PCITPSR		(CONFIG_MBAR + 0x8400)	/* TX packet size */
+#define	PCITSAR		(CONFIG_MBAR + 0x8404)	/* TX start address */
+#define	PCITTCR		(CONFIG_MBAR + 0x8408)	/* TX transaction control */
+#define	PCITER		(CONFIG_MBAR + 0x840c)	/* TX enables */
+#define	PCITNAR		(CONFIG_MBAR + 0x8410)	/* TX next address */
+#define	PCITLWR		(CONFIG_MBAR + 0x8414)	/* TX last word */
+#define	PCITDCR		(CONFIG_MBAR + 0x8418)	/* TX done counts */
+#define	PCITSR		(CONFIG_MBAR + 0x841c)	/* TX status */
+#define	PCITFDR		(CONFIG_MBAR + 0x8440)	/* TX FIFO data */
+#define	PCITFSR		(CONFIG_MBAR + 0x8444)	/* TX FIFO status */
+#define	PCITFCR		(CONFIG_MBAR + 0x8448)	/* TX FIFO control */
+#define	PCITFAR		(CONFIG_MBAR + 0x844c)	/* TX FIFO alarm */
+#define	PCITFRPR	(CONFIG_MBAR + 0x8450)	/* TX FIFO read pointer */
+#define	PCITFWPR	(CONFIG_MBAR + 0x8454)	/* TX FIFO write pointer */
+
+#define	PCIRPSR		(CONFIG_MBAR + 0x8480)	/* RX packet size */
+#define	PCIRSAR		(CONFIG_MBAR + 0x8484)	/* RX start address */
+#define	PCIRTCR		(CONFIG_MBAR + 0x8488)	/* RX transaction control */
+#define	PCIRER		(CONFIG_MBAR + 0x848c)	/* RX enables */
+#define	PCIRNAR		(CONFIG_MBAR + 0x8490)	/* RX next address */
+#define	PCIRDCR		(CONFIG_MBAR + 0x8498)	/* RX done counts */
+#define	PCIRSR		(CONFIG_MBAR + 0x849c)	/* RX status */
+#define	PCIRFDR		(CONFIG_MBAR + 0x84c0)	/* RX FIFO data */
+#define	PCIRFSR		(CONFIG_MBAR + 0x84c4)	/* RX FIFO status */
+#define	PCIRFCR		(CONFIG_MBAR + 0x84c8)	/* RX FIFO control */
+#define	PCIRFAR		(CONFIG_MBAR + 0x84cc)	/* RX FIFO alarm */
+#define	PCIRFRPR	(CONFIG_MBAR + 0x84d0)	/* RX FIFO read pointer */
+#define	PCIRFWPR	(CONFIG_MBAR + 0x84d4)	/* RX FIFO write pointer */
+
+#define	PACR		(CONFIG_MBAR + 0xc00)	/* PCI arbiter control */
+#define	PASR		(COFNIG_MBAR + 0xc04)	/* PCI arbiter status */
+
+/*
+ *	Definitions for the Global status and control register.
+ */
+#define	PCIGSCR_PE	0x20000000		/* Parity error detected */
+#define	PCIGSCR_SE	0x10000000		/* System error detected */
+#define	PCIGSCR_XCLKBIN	0x07000000		/* XLB2CLKIN mask */
+#define	PCIGSCR_PEE	0x00002000		/* Parity error intr enable */
+#define	PCIGSCR_SEE	0x00001000		/* System error intr enable */
+#define	PCIGSCR_RESET	0x00000001		/* Reset bit */
+
+/*
+ *	Bit definitions for the PCICAR configuration address register.
+ */
+#define	PCICAR_E	0x80000000		/* Enable config space */
+#define	PCICAR_BUSN	16			/* Move bus bits */
+#define	PCICAR_DEVFNN	8			/* Move devfn bits */
+#define	PCICAR_DWORDN	0			/* Move dword bits */
+
+/*
+ *	The initiator windows hold the memory and IO mapping information.
+ *	This macro creates the register values from the desired addresses.
+ */
+#define	WXBTAR(hostaddr, pciaddr, size)	\
+			(((hostaddr) & 0xff000000) | \
+			((((size) - 1) & 0xff000000) >> 8) | \
+			(((pciaddr) & 0xff000000) >> 16))
+
+#define	PCIIWCR_W0_MEM	0x00000000		/* Window 0 is memory */
+#define	PCIIWCR_W0_IO	0x08000000		/* Window 0 is IO */
+#define	PCIIWCR_W0_MRD	0x00000000		/* Window 0 memory read */
+#define	PCIIWCR_W0_MRDL	0x02000000		/* Window 0 memory read line */
+#define	PCIIWCR_W0_MRDM	0x04000000		/* Window 0 memory read mult */
+#define	PCIIWCR_W0_E	0x01000000		/* Window 0 enable */
+
+#define	PCIIWCR_W1_MEM	0x00000000		/* Window 0 is memory */
+#define	PCIIWCR_W1_IO	0x00080000		/* Window 0 is IO */
+#define	PCIIWCR_W1_MRD	0x00000000		/* Window 0 memory read */
+#define	PCIIWCR_W1_MRDL	0x00020000		/* Window 0 memory read line */
+#define	PCIIWCR_W1_MRDM	0x00040000		/* Window 0 memory read mult */
+#define	PCIIWCR_W1_E	0x00010000		/* Window 0 enable */
+
+/*
+ *	Bit definitions for the PCIBATR registers.
+ */
+#define	PCITBATR0_E	0x00000001		/* Enable window 0 */
+#define	PCITBATR1_E	0x00000001		/* Enable window 1 */
+
+/*
+ *	PCI arbiter support definitions and macros.
+ */
+#define	PACR_INTMPRI	0x00000001
+#define	PACR_EXTMPRI(x)	(((x) & 0x1f) << 1)
+#define	PACR_INTMINTE	0x00010000
+#define	PACR_EXTMINTE(x) (((x) & 0x1f) << 17)
+#define	PACR_PKMD	0x40000000
+#define	PACR_DS		0x80000000
+
+#define	PCICR1_CL(x)	((x) & 0xf)		/* Cacheline size field */
+#define	PCICR1_LT(x)	(((x) & 0xff) << 8)	/* Latency timer field */
+
+/****************************************************************************/
+#endif	/* M54XXPCI_H */
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index ae56b88..d3c5e0d 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -81,4 +81,7 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
+#define MCF_PAR_PCIBG		(CONFIG_MBAR + 0xa48)	/* PCI bus grant */
+#define MCF_PAR_PCIBR		(CONFIG_MBAR + 0xa4a)	/* PCI */
+
 #endif	/* m54xxsim_h */
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Video for Linux]     [Yosemite News]     [Linux S/390]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux