From e5b176bc75f24063f00e42ddf8594c43925bf2c9 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@xxxxxxxxxx>
Date: Mon, 30 Apr 2012 19:22:36 +1200
Subject: [PATCH 02/11] [m68k] Atari: declare original EtherNEC driver obsolete
---
drivers/net/Space.c | 2 +-
drivers/net/ethernet/8390/Kconfig | 4 ++--
drivers/net/ethernet/8390/Makefile | 2 +-
drivers/net/ethernet/8390/atari_ethernec.c | 6 +++---
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 5acb70a..779ba83 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -245,7 +245,7 @@ static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
{atarilance_probe, 0},
#endif
-#ifdef CONFIG_ATARI_ETHERNEC /* NE2000 based ROM port ethernet cards */
+#ifdef CONFIG_ATARI_ETHERNEC_OLD /* NE2000 based ROM port ethernet cards */
{atari_ethernec_probe, 0},
#endif
#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index b801056..4501c75 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -223,8 +223,8 @@ config APNE
To compile this driver as a module, choose M here: the module
will be called apne.
-config ATARI_ETHERNEC
- tristate "Atari EtherNEC Ethernet support"
+config ATARI_ETHERNEC_OLD
+ tristate "Atari EtherNEC Ethernet support - obsolete driver"
depends on ATARI_ROM_ISA
help
Say Y to include support for the EtherNEC network adapter for the
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index d896466..8513e8d 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
-obj-$(CONFIG_ATARI_ETHERNEC) += atari_ethernec.o 8390.o
+obj-$(CONFIG_ATARI_ETHERNEC_OLD) += atari_ethernec.o 8390.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_E2100) += e2100.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390p.o
diff --git a/drivers/net/ethernet/8390/atari_ethernec.c b/drivers/net/ethernet/8390/atari_ethernec.c
index 4b1b953..69af404 100644
--- a/drivers/net/ethernet/8390/atari_ethernec.c
+++ b/drivers/net/ethernet/8390/atari_ethernec.c
@@ -184,13 +184,13 @@ bad_clone_list[] __initdata = {
# define DCR_VAL 0x4b
#elif defined(CONFIG_PLAT_OAKS32R) || \
defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) || \
- defined(CONFIG_ATARI_ETHERNEC) || defined(CONFIG_ATARI_ETHERNEC_MODULE)
+ defined(CONFIG_ATARI_ETHERNEC_OLD) || defined(CONFIG_ATARI_ETHERNEC_OLD_MODULE)
# define DCR_VAL 0x48 /* 8-bit mode */
#else
# define DCR_VAL 0x49
#endif
-#if defined(CONFIG_ATARI_ETHERNEC) || defined(CONFIG_ATARI_ETHERNEC_MODULE)
+#if defined(CONFIG_ATARI_ETHERNEC_OLD) || defined(CONFIG_ATARI_ETHERNEC_OLD_MODULE)
# define ETHERNEC_RTL_8019_BASE 0x300
# define ETHERNEC_RTL_8019_IRQ IRQ_MFP_TIMD
#endif
@@ -356,7 +356,7 @@ struct net_device * __init atari_ethernec_probe(int unit)
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
-#if defined(CONFIG_ATARI_ETHERNEC)
+#if defined(CONFIG_ATARI_ETHERNEC_OLD)
dev->base_addr = ETHERNEC_RTL_8019_BASE;
dev->irq = ETHERNEC_RTL_8019_IRQ;
#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
