From: Greg Ungerer <gerg@xxxxxxxxxxx>
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.
So modify the ColdFire 523x FEC addressing so that:
. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
arch/m68k/include/asm/m523xsim.h | 13 ++++++++++---
arch/m68k/platform/523x/config.c | 16 ++++++++--------
2 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 919d115..e1988dd 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -37,13 +37,20 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
-#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
+#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
+#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
+#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
+#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
+
/*
* SDRAM configuration registers.
*/
@@ -72,8 +79,8 @@
/*
* FEC ethernet module.
*/
-#define MCFFEC_BASE (MCF_IPSBAR + 0x1000)
-#define MCFFEC_SIZE 0x800
+#define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000)
+#define MCFFEC_SIZE0 0x800
/*
* GPIO module.
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
index 308aed1..5433c76 100644
--- a/arch/m68k/platform/523x/config.c
+++ b/arch/m68k/platform/523x/config.c
@@ -28,23 +28,23 @@
static struct resource m523x_fec_resources[] = {
{
- .start = MCFFEC_BASE,
- .end = MCFFEC_BASE + MCFFEC_SIZE - 1,
+ .start = MCFFEC_BASE0,
+ .end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
- .start = 64 + 23,
- .end = 64 + 23,
+ .start = MCF_IRQ_FECRX0,
+ .end = MCF_IRQ_FECRX0,
.flags = IORESOURCE_IRQ,
},
{
- .start = 64 + 27,
- .end = 64 + 27,
+ .start = MCF_IRQ_FECTX0,
+ .end = MCF_IRQ_FECTX0,
.flags = IORESOURCE_IRQ,
},
{
- .start = 64 + 29,
- .end = 64 + 29,
+ .start = MCF_IRQ_FECENTC0,
+ .end = MCF_IRQ_FECENTC0,
.flags = IORESOURCE_IRQ,
},
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
