From: Greg Ungerer <gerg@xxxxxxxxxxx>
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.
So modify the ColdFire 532x UART addressing so that:
. UARTs are numbered from 0 up
. use a common name for IRQs used
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
arch/m68k/include/asm/m532xsim.h | 10 +++++++---
arch/m68k/platform/532x/config.c | 12 ++++++------
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index ba4cc78..f963d64 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -25,6 +25,10 @@
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
+#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
+
#define MCF_WTM_WCR MCF_REG16(0xFC098000)
/*
@@ -82,9 +86,9 @@
/*
* UART module.
*/
-#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
-#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
-#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */
+#define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */
+#define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */
+#define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */
/*
* Timer module.
diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c
index ca51323..4aba0fa 100644
--- a/arch/m68k/platform/532x/config.c
+++ b/arch/m68k/platform/532x/config.c
@@ -35,16 +35,16 @@
static struct mcf_platform_uart m532x_uart_platform[] = {
{
- .mapbase = MCFUART_BASE1,
- .irq = MCFINT_VECBASE + MCFINT_UART0,
+ .mapbase = MCFUART_BASE0,
+ .irq = MCF_IRQ_UART0,
},
{
- .mapbase = MCFUART_BASE2,
- .irq = MCFINT_VECBASE + MCFINT_UART1,
+ .mapbase = MCFUART_BASE1,
+ .irq = MCF_IRQ_UART1,
},
{
- .mapbase = MCFUART_BASE3,
- .irq = MCFINT_VECBASE + MCFINT_UART2,
+ .mapbase = MCFUART_BASE2,
+ .irq = MCF_IRQ_UART2,
},
{ },
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
