On 09/01/12 00:05, Michael Schmitz wrote:
What buffers? Filesystem buffers should be fine in TT-RAM. atafb
buffer requirement could be reduced by using a low-res video mode
perhaps (just to get past this point initially).
O.k. I've managed to cut down the kernel and boot with atafb enabled and
it works, using the stram_pool option.
Next problem is the SCSI controller.
I get......
Atari SCSI: resetting the SCSI bus... done
scsi0: options CAN_QUEUE=16 CMD_PER_LUN=8 SCAT-GAT=128 TAGGED-QUEUING=no
HOSTID=7 generic options AUTOSENSE REAL DMA SCSI-2 TAGGED QUEUING
generic release=7
scsi0 : Atari native SCSI
scsi0: aborting command
scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 24 00
NCR5380 core release=7.
NCR5380: coroutine isn't running.
scsi0: no currently connected command
scsi0: issue_queue
scsi0: disconnected_queue
scsi0: destination target 0, lun 0
command = 18 (0x12) 00 00 00 24 00
NCR5380 core release=7.
NCR5380: coroutine isn't running.
scsi0: no currently connected command
scsi0: issue_queue
scsi0: disconnected_queue
scsi0: destination target 0, lun 0
command = 18 (0x12) 00 00 00 24 00
scsi 0:0:0:0: Device offlined - not ready after error recovery
I'll start poking at this.
Alan.
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
