Fix the mac_scsi interrupt edge trigger on non-RBV PowerBooks. This
doesn't appear to help my PowerBook 520 but the NetBSD source reveals
that the PowerBook 500 series is different than the others.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
Re-sending unchanged. Still needs the right ack.
Index: linux-m68k/arch/m68k/mac/via.c
===================================================================
--- linux-m68k.orig/arch/m68k/mac/via.c 2011-10-22 23:02:39.000000000 +1100
+++ linux-m68k/arch/m68k/mac/via.c 2011-10-23 00:51:01.000000000 +1100
@@ -252,22 +252,28 @@ void __init via_init(void)
via2[vACR] &= ~0x03; /* disable port A & B latches */
}
+ /* Everything below this point is VIA2 only... */
+
+ if (rbv_present)
+ return;
+
/*
- * Set vPCR for control line interrupts (but not on RBV)
+ * Set vPCR for control line interrupts.
+ *
+ * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger.
+ *
+ * Macs with ESP SCSI have a negative edge triggered SCSI interrupt.
+ * Testing reveals that PowerBooks do too. However, the SE/30
+ * schematic diagram shows an active high NCR5380 IRQ line.
*/
- if (!rbv_present) {
- /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
- * are made negative edge triggered here.
- */
- if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
- /* CB2 (IRQ) indep. input, positive edge */
- /* CA2 (DRQ) indep. input, positive edge */
- via2[vPCR] = 0x66;
- } else {
- /* CB2 (IRQ) indep. input, negative edge */
- /* CA2 (DRQ) indep. input, negative edge */
- via2[vPCR] = 0x22;
- }
+
+ pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]);
+ if (macintosh_config->via_type == MAC_VIA_II) {
+ /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */
+ via2[vPCR] = 0x66;
+ } else {
+ /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */
+ via2[vPCR] = 0x22;
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
