No behavioural changes, just cleanups and better documentation.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
arch/m68k/mac/via.c | 79 +++++++++++++++++++++-------------------------------
1 files changed, 32 insertions(+), 47 deletions(-)
Index: linux-2.6.27-rc8/arch/m68k/mac/via.c
===================================================================
--- linux-2.6.27-rc8.orig/arch/m68k/mac/via.c
+++ linux-2.6.27-rc8/arch/m68k/mac/via.c
@@ -37,10 +37,6 @@
#include <asm/mac_psc.h>
volatile __u8 *via1, *via2;
-#if 0
-/* See note in mac_via.h about how this is possibly not useful */
-volatile long *via_memory_bogon=(long *)&via_memory_bogon;
-#endif
int rbv_present;
int via_alt_mapping;
EXPORT_SYMBOL(via_alt_mapping);
@@ -66,7 +62,7 @@
#define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF)
#define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8)
-/* To disable a NuBus slot on Quadras we make the slot IRQ lines outputs, set
+/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set
* high. On RBV we just use the slot interrupt enable register. On Macs with
* genuine VIA chips we must use nubus_disabled to keep track of disabled slot
* interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
@@ -180,7 +176,7 @@
via1[vT1CH] = 0;
via1[vT2CL] = 0;
via1[vT2CH] = 0;
- via1[vACR] &= 0x3F;
+ via1[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via1[vACR] &= ~0x03; /* disable port A & B latches */
/*
@@ -203,40 +199,41 @@
/* Everything below this point is VIA2/RBV only... */
- if (oss_present) return;
+ if (oss_present)
+ return;
-#if 1
/* Some machines support an alternate IRQ mapping that spreads */
/* Ethernet and Sound out to their own autolevel IRQs and moves */
/* VIA1 to level 6. A/UX uses this mapping and we do too. Note */
/* that the IIfx emulates this alternate mapping using the OSS. */
- switch(macintosh_config->ident) {
- case MAC_MODEL_P475:
- case MAC_MODEL_P475F:
- case MAC_MODEL_P575:
- case MAC_MODEL_Q605:
- case MAC_MODEL_Q605_ACC:
- case MAC_MODEL_C610:
- case MAC_MODEL_Q610:
- case MAC_MODEL_Q630:
- case MAC_MODEL_C650:
- case MAC_MODEL_Q650:
- case MAC_MODEL_Q700:
- case MAC_MODEL_Q800:
- case MAC_MODEL_Q900:
- case MAC_MODEL_Q950:
+ via_alt_mapping = 0;
+ if (macintosh_config->via_type == MAC_VIA_QUADRA)
+ switch (macintosh_config->ident) {
+ case MAC_MODEL_C660:
+ case MAC_MODEL_Q840:
+ /* not applicable */
+ break;
+ case MAC_MODEL_P588:
+ case MAC_MODEL_TV:
+ case MAC_MODEL_PB140:
+ case MAC_MODEL_PB145:
+ case MAC_MODEL_PB160:
+ case MAC_MODEL_PB165:
+ case MAC_MODEL_PB165C:
+ case MAC_MODEL_PB170:
+ case MAC_MODEL_PB180:
+ case MAC_MODEL_PB180C:
+ case MAC_MODEL_PB190:
+ case MAC_MODEL_PB520:
+ /* not yet tested */
+ break;
+ default:
via_alt_mapping = 1;
via1[vDirB] |= 0x40;
via1[vBufB] &= ~0x40;
break;
- default:
- via_alt_mapping = 0;
- break;
- }
-#else
- via_alt_mapping = 0;
-#endif
+ }
/*
* Now initialize VIA2. For RBV we just kill all interrupts;
@@ -252,14 +249,17 @@
via2[vT1CH] = 0;
via2[vT2CL] = 0;
via2[vT2CH] = 0;
- via2[vACR] &= 0x3F;
+ via2[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via2[vACR] &= ~0x03; /* disable port A & B latches */
}
/*
- * Set vPCR for SCSI interrupts (but not on RBV)
+ * Set vPCR for control line interrupts (but not on RBV)
*/
if (!rbv_present) {
+ /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
+ * are made negative edge triggered here.
+ */
if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
/* CB2 (IRQ) indep. input, positive edge */
/* CA2 (DRQ) indep. input, positive edge */
@@ -466,21 +466,6 @@
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
-
-#if 0 /* freakin' pmu is doing weird stuff */
- if (!oss_present) {
- /* This (still) seems to be necessary to get IDE
- working. However, if you enable VBL interrupts,
- you're screwed... */
- /* FIXME: should we check the SLOTIRQ bit before
- pulling this stunt? */
- /* No, it won't be set. that's why we're doing this. */
- via_irq_disable(IRQ_MAC_NUBUS);
- via_irq_clear(IRQ_MAC_NUBUS);
- m68k_handle_int(IRQ_MAC_NUBUS);
- via_irq_enable(IRQ_MAC_NUBUS);
- }
-#endif
return IRQ_HANDLED;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
