Hi! Let me introduce myself here as I have never contributed to this list before. My name is Standa Opichal and I am one of the guys from the ARAnyM team who was mostly working on the native FreeMiNT drivers for the emulator. I have been trying to build the 2.6.8-18 from the debian server provided linux-2.6_2.6.18.orig.tar.gz and linux-2.6_2.6.18-8.diff.gz. I am using crosstool-0.43 provided crosscompiler (gcc-3.4.5-glibc-2.3.6, see below for more details if needed). I wasn't completely sure about how to configure the source to build with the aranym extensions and so I used slightly modified debian/arch/m68k/config.atari as the all.config and run the 'allnoconfig' target to get complete .config (my all.config is attached). The build was successful and I am able to get aranym (the latest CVS version) booting the kernel. However I got some kernel panic and after few added lines I have got the output below where it seems that the IRQ 15 is already taken (failing on request_irq() in init_irq() in drivers/ide/ide-probe.c around line 1120 - see the complete output below). As I have no experience in Linux kernel hacking yet (this is hopefully going to change) I would kind like to ask you for some guidance like what to try next, some URLs to get the real bleeding edge sources and patches if that was fixed/changed. I just hope I am not too ignorant to local rules and that this mail is just a starting point for our further cooperation. Best Regards Standa Console output: NatFeats found Linux version 2.6.18 (standa@oxygen) (gcc version 3.4.5) #24 Tue Jan 23 19:48:11 EST 2007 Atari hardware found: VIDEL STDMA-SCSI ST_MFP STND_DMA YM2149 PCM CODEC DSP56K ANALOG_JOY Blitter tried to read byte from regist er ff8a00 at 00770e BLITTER IDE TT_CLK FDC_SPEED DIB_SetVideoMode: SDL_windowid 0 SDL_windowX 201, SDL_windowY 220 DIB_SetVideoMode2: SDL_windowid 0 SDL_windowX 201, SDL_windowY 220 DIB_SetVideoMode3: top -2 x 198, y 198 Built 2 zonelists. Total pages: 32256 Kernel command line: root=/dev/hda1 video=atafb:vga16 stram_swap=0 debug=par BOOT_IMAGE=vmlinux ST-DMA: floppy/ACSI/IDE/Falcon-SCSI: request_irq: IRQ 15 ST-DMA: floppy/ACSI/IDE/Falcon-SCSI: request_irq: IRQ 15 -> 0 PID hash table entries: 512 (order: 9, 2048 bytes) timer: request_irq: IRQ 13 timer: request_irq: IRQ 13 -> 0 Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 126136k/126136k available (1120k kernel code, 1692k data, 80k init) Mount-cache hash table entries: 512 NET: Registered protocol family 16 io scheduler noop registered (default) atafb_init: start atafb_init: initializing Falcon hw framebuffer/modeswitch: request_irq: IRQ 4 framebuffer/modeswitch: request_irq: IRQ 4 -> 0 atafb: screen_base 00380000 real_screen_base 00380000 screen_len 311296 Determined 640x480, depth 4 virtual 640x972 framebuffer vbl: request_irq: IRQ 4 framebuffer vbl: request_irq: IRQ 4 -> -16 Console: switching to colour frame buffer device 80x30 fb0: frame buffer device, using 304K of video memory Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Atari floppy driver: max. HD, track buffering Probing floppy drive(s): fd0 atari_nfeth.c:v0.3 10/12/2005 S.Opichal, M.Jurik, P.Stehlik http://aranym.atari.org/ ne.c:v1.10 9/23/94 Donald Becker (becker@xxxxxxxxx) atari_ethernec.c 11/10/06 Michael Schmitz (schmitz@xxxxxxxxxx) not found (no reset ack). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Falcon IDE interface hda: Etch m68k, ATA DISK drive ide: init_irq! ide: init_irq MAX_HWIFS > 1, hwif->irq = 15! ide: h->name = ide0, h->hwgroup = 00000000, h->irq = 15! ide: h->name = ide1, h->hwgroup = 00000000, h->irq = 0! ide: h->name = ide2, h->hwgroup = 00000000, h->irq = 0! ide: h->name = ide3, h->hwgroup = 00000000, h->irq = 0! ide: init_irq match = 00000000 ide: init_irq hwgroup = 0035dc70 ide: init_irq match->irq -5, hwif->irq = 15 ide: init_irq request_irq ide0: request_irq: IRQ 15 ide0: request_irq: IRQ 15 -> -16 ide: init_irq out_unlink! ide0: Disabled unable to get IRQ 15. mice: PS/2 mouse device common for all mice No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) The cross environment: standa@oxygen linuxm68k $ m68k-unknown-linux-gnu-gcc -v Reading specs from /local/opt/crosstool/gcc-3.4.5-glibc-2.3.6/m68k-unknown-linux-gnu/lib/gcc/m6 8k-unknown-linux-gnu/3.4.5/specs Configured with: /local/home/standa/linuxm68k/crosstool-0.43/build/m68k-unknown-linux-gnu/gcc -3.4.5-glibc-2.3.6/gcc-3.4.5/configure --target=m68k-unknown-linux-gnu --host=i686-host_pc-linux-gnu --prefix=/local/opt/crosstool/gcc-3.4.5-glibc-2.3.6/m68k-unknown-linux-gnu --with-headers=/local/opt/crosstool/gcc-3.4.5-glibc-2.3.6/m68k-unknown-linux -gnu/m68k-unknown-linux-gnu/include --with-local-prefix=/local/opt/crosstool/gcc-3.4.5-glibc-2.3.6/m68k-unknown- linux-gnu/m68k-unknown-linux-gnu --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-__cxa_atexit --enable-languages=c,c++ --enable-shared --enable-c99 --enable-long-long Thread model: posix gcc version 3.4.5 standa@oxygen bin $ m68k-unknown-linux-gnu-ld -v GNU ld version 2.15 ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
