On Fri, 28 Feb 2025, Matthias Fend wrote:
> The TPS61310/TPS61311 is a flash LED driver with I2C interface. Its power
> stage is capable of supplying a maximum total current of roughly 1500mA.
> The TPS6131x provides three constant-current sinks, capable of sinking up
> to 2 × 400mA (LED1 and LED3) and 800mA (LED2) in flash mode. In torch mode
> each sink (LED1, LED2, LED3) supports currents up to 175mA.
>
> Signed-off-by: Matthias Fend <matthias.fend@xxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/leds/flash/Kconfig | 11 +
> drivers/leds/flash/Makefile | 1 +
> drivers/leds/flash/leds-tps6131x.c | 798 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 817 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0fa7c5728f1e64d031f4a47b6fce1db484ce0fc2..d2ca840647b566cfee4d8ded1f787e32be4aa163 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -23225,6 +23225,13 @@ F: Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> F: Documentation/hwmon/tps23861.rst
> F: drivers/hwmon/tps23861.c
>
> +TEXAS INSTRUMENTS TPS6131X FLASH LED DRIVER
> +M: Matthias Fend <matthias.fend@xxxxxxxxx>
> +L: linux-leds@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/leds/ti,tps6131x.yaml
> +F: drivers/leds/flash/leds-tps6131x.c
> +
> TEXAS INSTRUMENTS' DAC7612 DAC DRIVER
> M: Ricardo Ribalda <ribalda@xxxxxxxxxx>
> L: linux-iio@xxxxxxxxxxxxxxx
> diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
> index f39f0bfe6eefcd376405d9d35dc36e323a485002..55ca663ca506ad8be627f58f6d6308368ea2b928 100644
> --- a/drivers/leds/flash/Kconfig
> +++ b/drivers/leds/flash/Kconfig
> @@ -132,4 +132,15 @@ config LEDS_SY7802
>
> This driver can be built as a module, it will be called "leds-sy7802".
>
> +config LEDS_TPS6131X
> + tristate "LED support for TI TPS6131x flash LED driver"
> + depends on I2C && OF
> + depends on GPIOLIB
> + select REGMAP_I2C
> + help
> + This option enables support for Texas Instruments TPS61310/TPS61311
> + flash LED driver.
> +
> + This driver can be built as a module, it will be called "leds-tps6131x".
> +
> endif # LEDS_CLASS_FLASH
> diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
> index 48860eeced79513a0ed303e4af3db9bfe9724b7e..712fb737a428e42747e1aa339058dc4306ade9c8 100644
> --- a/drivers/leds/flash/Makefile
> +++ b/drivers/leds/flash/Makefile
> @@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS_RT4505) += leds-rt4505.o
> obj-$(CONFIG_LEDS_RT8515) += leds-rt8515.o
> obj-$(CONFIG_LEDS_SGM3140) += leds-sgm3140.o
> obj-$(CONFIG_LEDS_SY7802) += leds-sy7802.o
> +obj-$(CONFIG_LEDS_TPS6131X) += leds-tps6131x.o
> diff --git a/drivers/leds/flash/leds-tps6131x.c b/drivers/leds/flash/leds-tps6131x.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..5fca542ac88da1db755a75e982dee8e3dde06373
> --- /dev/null
> +++ b/drivers/leds/flash/leds-tps6131x.c
> @@ -0,0 +1,798 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Texas Instruments TPS61310/TPS61311 flash LED driver with I2C interface
> + *
> + * Copyright 2025 Matthias Fend <matthias.fend@xxxxxxxxx>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <media/v4l2-flash-led-class.h>
> +
> +/* Registers */
> +
> +#define TPS6131X_REG_0 0x00
> +#define TPS6131X_REG_0_RESET BIT(7)
> +#define TPS6131X_REG_0_DCLC13 GENMASK(5, 3)
> +#define TPS6131X_REG_0_DCLC13_SHIFT 3
> +#define TPS6131X_REG_0_DCLC2 GENMASK(2, 0)
> +#define TPS6131X_REG_0_DCLC2_SHIFT 0
> +
> +#define TPS6131X_REG_1 0x01
> +#define TPS6131X_REG_1_MODE GENMASK(7, 6)
> +#define TPS6131X_REG_1_MODE_SHIFT 6
> +#define TPS6131X_REG_1_FC2 GENMASK(5, 0)
> +#define TPS6131X_REG_1_FC2_SHIFT 0
> +
> +#define TPS6131X_REG_2 0x02
> +#define TPS6131X_REG_2_MODE GENMASK(7, 6)
> +#define TPS6131X_REG_2_MODE_SHIFT 6
> +#define TPS6131X_REG_2_ENVM BIT(5)
> +#define TPS6131X_REG_2_FC13 GENMASK(4, 0)
> +#define TPS6131X_REG_2_FC13_SHIFT 0
> +
> +#define TPS6131X_REG_3 0x03
> +#define TPS6131X_REG_3_STIM GENMASK(7, 5)
> +#define TPS6131X_REG_3_STIM_SHIFT 5
> +#define TPS6131X_REG_3_HPFL BIT(4)
> +#define TPS6131X_REG_3_SELSTIM_TO BIT(3)
> +#define TPS6131X_REG_3_STT BIT(2)
> +#define TPS6131X_REG_3_SFT BIT(1)
> +#define TPS6131X_REG_3_TXMASK BIT(0)
> +
> +#define TPS6131X_REG_4 0x04
> +#define TPS6131X_REG_4_PG BIT(7)
> +#define TPS6131X_REG_4_HOTDIE_HI BIT(6)
> +#define TPS6131X_REG_4_HOTDIE_LO BIT(5)
> +#define TPS6131X_REG_4_ILIM BIT(4)
> +#define TPS6131X_REG_4_INDC GENMASK(3, 0)
> +#define TPS6131X_REG_4_SHIFT 0
> +
> +#define TPS6131X_REG_5 0x05
> +#define TPS6131X_REG_5_SELFCAL BIT(7)
> +#define TPS6131X_REG_5_ENPSM BIT(6)
> +#define TPS6131X_REG_5_STSTRB1_DIR BIT(5)
> +#define TPS6131X_REG_5_GPIO BIT(4)
> +#define TPS6131X_REG_5_GPIOTYPE BIT(3)
> +#define TPS6131X_REG_5_ENLED3 BIT(2)
> +#define TPS6131X_REG_5_ENLED2 BIT(1)
> +#define TPS6131X_REG_5_ENLED1 BIT(0)
> +
> +#define TPS6131X_REG_6 0x06
> +#define TPS6131X_REG_6_ENTS BIT(7)
> +#define TPS6131X_REG_6_LEDHOT BIT(6)
> +#define TPS6131X_REG_6_LEDWARN BIT(5)
> +#define TPS6131X_REG_6_LEDHDR BIT(4)
> +#define TPS6131X_REG_6_OV GENMASK(3, 0)
> +#define TPS6131X_REG_6_OV_SHIFT 0
> +
> +#define TPS6131X_REG_7 0x07
> +#define TPS6131X_REG_7_ENBATMON BIT(7)
> +#define TPS6131X_REG_7_BATDROOP GENMASK(6, 4)
> +#define TPS6131X_REG_7_BATDROOP_SHIFT 4
> +#define TPS6131X_REG_7_REVID GENMASK(2, 0)
> +#define TPS6131X_REG_7_REVID_SHIFT 0
> +
> +/* Constants */
> +
> +#define TPS6131X_MAX_CHANNELS 3
> +
> +#define TPS6131X_FLASH_MAX_I_CHAN13_MA 400
> +#define TPS6131X_FLASH_MAX_I_CHAN2_MA 800
> +#define TPS6131X_FLASH_STEP_I_MA 25
> +
> +#define TPS6131X_TORCH_MAX_I_CHAN13_MA 175
> +#define TPS6131X_TORCH_MAX_I_CHAN2_MA 175
> +#define TPS6131X_TORCH_STEP_I_MA 25
> +
> +#define TPS6131X_TORCH_REFRESH_INTERVAL_JIFFIES msecs_to_jiffies(10000)
> +
> +struct tps6131x {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct gpio_desc *reset_gpio;
> + struct mutex lock; /* */
?
> + struct delayed_work torch_refresh_work;
> + bool valley_current_limit;
> + bool chan1_en;
> + bool chan2_en;
> + bool chan3_en;
> + struct fwnode_handle *led_node;
> + u32 max_flash_current_ma;
> + u32 step_flash_current_ma;
> + u32 max_torch_current_ma;
> + u32 step_torch_current_ma;
> + u32 max_timeout_us;
> + struct led_classdev_flash fled_cdev;
> + struct v4l2_flash *v4l2_flash;
> +};
> +
> +static struct tps6131x *fled_cdev_to_tps6131x(struct led_classdev_flash *fled_cdev)
> +{
> + return container_of(fled_cdev, struct tps6131x, fled_cdev);
> +}
> +
> +static const struct reg_default tps6131x_regmap_defaults[] = {
> + { TPS6131X_REG_0, 0x0A },
> + { TPS6131X_REG_1, 0x10 },
> + { TPS6131X_REG_2, 0x08 },
> + { TPS6131X_REG_3, 0xC1 },
> + { TPS6131X_REG_4, 0x00 },
> + { TPS6131X_REG_5, 0x6A },
> + { TPS6131X_REG_6, 0x00 },
> + { TPS6131X_REG_7, 0x46 },
I'm not a big fan of blind register patching.
These would be better either defined (preferred) or commented.
> +};
> +
> +/*
> + * These registers contain flags that are reset when read. Ensure that these registers are not read
> + * outside of a call from the driver.
> + */
> +static bool tps6131x_regmap_precious(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case TPS6131X_REG_3:
> + case TPS6131X_REG_4:
> + case TPS6131X_REG_6:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config tps6131x_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = TPS6131X_REG_7,
> + .reg_defaults = tps6131x_regmap_defaults,
> + .num_reg_defaults = ARRAY_SIZE(tps6131x_regmap_defaults),
> + .cache_type = REGCACHE_FLAT,
> + .precious_reg = &tps6131x_regmap_precious,
> +};
> +
> +struct tps6131x_timer_config {
> + u8 val;
> + u8 range;
> + u32 time_us;
> +};
> +
> +static const struct tps6131x_timer_config tps6131x_timer_configs[] = {
> + { .val = 0, .range = 1, .time_us = 5300 },
> + { .val = 1, .range = 1, .time_us = 10700 },
> + { .val = 2, .range = 1, .time_us = 16000 },
> + { .val = 3, .range = 1, .time_us = 21300 },
> + { .val = 4, .range = 1, .time_us = 26600 },
> + { .val = 5, .range = 1, .time_us = 32000 },
> + { .val = 6, .range = 1, .time_us = 37300 },
> + { .val = 0, .range = 0, .time_us = 68200 },
> + { .val = 7, .range = 1, .time_us = 71500 },
> + { .val = 1, .range = 0, .time_us = 102200 },
> + { .val = 2, .range = 0, .time_us = 136300 },
> + { .val = 3, .range = 0, .time_us = 170400 },
> + { .val = 4, .range = 0, .time_us = 204500 },
> + { .val = 5, .range = 0, .time_us = 340800 },
> + { .val = 6, .range = 0, .time_us = 579300 },
> + { .val = 7, .range = 0, .time_us = 852000 },
> +};
> +
> +static const struct tps6131x_timer_config *tps6131x_find_closest_timer_config(u32 timeout_us)
> +{
> + const struct tps6131x_timer_config *timer_config = &tps6131x_timer_configs[0];
> + u32 diff, min_diff = U32_MAX;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(tps6131x_timer_configs); i++) {
> + diff = abs(tps6131x_timer_configs[i].time_us - timeout_us);
> + if (diff < min_diff) {
> + timer_config = &tps6131x_timer_configs[i];
> + min_diff = diff;
> + if (!min_diff)
> + break;
> + }
> + }
> +
> + return timer_config;
> +}
> +
> +static int tps6131x_reset_chip(struct tps6131x *tps6131x)
> +{
> + int ret;
> +
> + if (IS_ERR_OR_NULL(tps6131x->reset_gpio)) {
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_0, TPS6131X_REG_0_RESET,
> + TPS6131X_REG_0_RESET);
> + if (ret)
> + return ret;
No delay required for this path?
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_0, TPS6131X_REG_0_RESET, 0);
> + if (ret)
> + return ret;
> + } else {
> + gpiod_set_value_cansleep(tps6131x->reset_gpio, 1);
> + fsleep(10);
> + gpiod_set_value_cansleep(tps6131x->reset_gpio, 0);
> + }
> +
> + return 0;
> +}
> +
> +static int tps6131x_init_chip(struct tps6131x *tps6131x)
> +{
> + u32 reg4, reg5, reg6;
> + int ret;
> +
> + reg4 = tps6131x->valley_current_limit ? TPS6131X_REG_4_ILIM : 0;
> + ret = regmap_write(tps6131x->regmap, TPS6131X_REG_4, reg4);
> + if (ret)
> + return ret;
> +
> + reg5 = TPS6131X_REG_5_ENPSM | TPS6131X_REG_5_STSTRB1_DIR | TPS6131X_REG_5_GPIOTYPE;
> + if (tps6131x->chan1_en)
> + reg5 |= TPS6131X_REG_5_ENLED1;
> +
> + if (tps6131x->chan2_en)
> + reg5 |= TPS6131X_REG_5_ENLED2;
> +
> + if (tps6131x->chan3_en)
> + reg5 |= TPS6131X_REG_5_ENLED3;
> + ret = regmap_write(tps6131x->regmap, TPS6131X_REG_5, reg5);
> + if (ret)
> + return ret;
> +
> + reg6 = TPS6131X_REG_6_ENTS;
> + ret = regmap_write(tps6131x->regmap, TPS6131X_REG_6, reg6);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +enum tps6131x_mode {
> + TPS6131X_MODE_SHUTDOWN,
> + TPS6131X_MODE_TORCH,
> + TPS6131X_MODE_FLASH,
> +};
> +
> +static int tps6131x_set_mode(struct tps6131x *tps6131x, enum tps6131x_mode mode, bool force)
> +{
> + u8 val;
> +
> + switch (mode) {
> + case TPS6131X_MODE_FLASH:
> + val = 2 << TPS6131X_REG_1_MODE_SHIFT;
> + break;
> + case TPS6131X_MODE_TORCH:
> + val = 1 << TPS6131X_REG_1_MODE_SHIFT;
> + break;
> + case TPS6131X_MODE_SHUTDOWN:
> + default:
> + val = 0 << TPS6131X_REG_1_MODE_SHIFT;
> + break;
> + }
What about:
val = mode << TPS6131X_REG_1_MODE_SHIFT;
> +
> + return regmap_update_bits_base(tps6131x->regmap, TPS6131X_REG_1, TPS6131X_REG_1_MODE, val,
> + NULL, false, force);
> +}
> +
> +static void tps6131x_torch_refresh_handler(struct work_struct *work)
> +{
> + struct tps6131x *tps6131x = container_of(work, struct tps6131x, torch_refresh_work.work);
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + tps6131x_set_mode(tps6131x, TPS6131X_MODE_TORCH, true);
> +
> + schedule_delayed_work(&tps6131x->torch_refresh_work,
> + TPS6131X_TORCH_REFRESH_INTERVAL_JIFFIES);
> +}
> +
> +static int tps6131x_brightness_set(struct led_classdev *cdev, enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + int ret;
> + u8 reg0;
> + u32 steps_remaining, steps_chan13, steps_chan2;
> + unsigned int num_chans = tps6131x->chan1_en + tps6131x->chan2_en + tps6131x->chan3_en;
It would quell my OCD if you reversed these 4 lines.
> + cancel_delayed_work_sync(&tps6131x->torch_refresh_work);
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + /*
> + * The brightness parameter uses the number of current steps as the unit (not the current
> + * value itself). Since the reported step size can vary depending on the configuration,
> + * this value must be converted into actual register steps.
> + */
> + steps_remaining = (brightness * tps6131x->step_torch_current_ma) / TPS6131X_TORCH_STEP_I_MA;
> +
> + /*
> + * The currents are distributed as evenly as possible across the activated channels.
> + * Since channels 1 and 3 share the same register setting, they always use the same current
> + * value. Channel 2 supports higher currents and thus takes over the remaining additional
> + * portion that cannot be covered by the other channels.
> + */
> + steps_chan13 = min_t(u32, steps_remaining / num_chans,
> + TPS6131X_TORCH_MAX_I_CHAN13_MA / TPS6131X_TORCH_STEP_I_MA);
> + if (tps6131x->chan1_en)
> + steps_remaining -= steps_chan13;
> + if (tps6131x->chan3_en)
> + steps_remaining -= steps_chan13;
> +
> + steps_chan2 = min_t(u32, steps_remaining,
> + TPS6131X_TORCH_MAX_I_CHAN2_MA / TPS6131X_TORCH_STEP_I_MA);
> +
> + reg0 = (steps_chan13 << TPS6131X_REG_0_DCLC13_SHIFT) |
> + (steps_chan2 << TPS6131X_REG_0_DCLC2_SHIFT);
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_0,
> + TPS6131X_REG_0_DCLC13 | TPS6131X_REG_0_DCLC2, reg0);
> + if (ret < 0)
> + return ret;
> +
> + ret = tps6131x_set_mode(tps6131x, brightness ? TPS6131X_MODE_TORCH : TPS6131X_MODE_SHUTDOWN,
> + true);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * In order to use both the flash and the video light functions purely via the I2C
> + * interface, STRB1 must be low. If STRB1 is low, then the video light watchdog timer
> + * is also active, which puts the device into the shutdown state after around 13 seconds.
> + * To prevent this, the mode must be refreshed within the watchdog timeout.
> + */
> + if (brightness)
> + schedule_delayed_work(&tps6131x->torch_refresh_work,
> + TPS6131X_TORCH_REFRESH_INTERVAL_JIFFIES);
> +
> + return 0;
> +}
> +
> +static int tps6131x_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
> +{
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + int ret;
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + ret = tps6131x_set_mode(tps6131x, state ? TPS6131X_MODE_FLASH : TPS6131X_MODE_SHUTDOWN,
> + true);
> + if (ret < 0)
> + return ret;
> +
> + if (state) {
> + ret = regmap_update_bits_base(tps6131x->regmap, TPS6131X_REG_3, TPS6131X_REG_3_SFT,
> + TPS6131X_REG_3_SFT, NULL, false, true);
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_update_bits_base(tps6131x->regmap, TPS6131X_REG_3, TPS6131X_REG_3_SFT, 0, NULL,
> + false, true);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int tps6131x_flash_brightness_set(struct led_classdev_flash *fled_cdev, u32 brightness)
> +{
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + u32 steps_remaining, steps_chan13, steps_chan2, num_chans;
> + int ret;
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + steps_remaining = brightness / TPS6131X_FLASH_STEP_I_MA;
> + num_chans = tps6131x->chan1_en + tps6131x->chan2_en + tps6131x->chan3_en;
> +
> + steps_chan13 = min_t(u32, steps_remaining / num_chans,
> + TPS6131X_FLASH_MAX_I_CHAN13_MA / TPS6131X_FLASH_STEP_I_MA);
> + if (tps6131x->chan1_en)
> + steps_remaining -= steps_chan13;
> + if (tps6131x->chan3_en)
> + steps_remaining -= steps_chan13;
> + steps_chan2 = min_t(u32, steps_remaining,
> + TPS6131X_FLASH_MAX_I_CHAN2_MA / TPS6131X_FLASH_STEP_I_MA);
> +
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_2, TPS6131X_REG_2_FC13,
> + steps_chan13 << TPS6131X_REG_2_FC13_SHIFT);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_1, TPS6131X_REG_1_FC2,
> + steps_chan2 << TPS6131X_REG_1_FC2_SHIFT);
> + if (ret < 0)
> + return ret;
> +
> + fled_cdev->brightness.val = brightness;
> +
> + return 0;
> +}
> +
> +static int tps6131x_flash_timeout_set(struct led_classdev_flash *fled_cdev, u32 timeout_us)
> +{
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + int ret;
> + u8 reg3;
> + const struct tps6131x_timer_config *timer_config;
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + timer_config = tps6131x_find_closest_timer_config(timeout_us);
> +
> + reg3 = timer_config->val << TPS6131X_REG_3_STIM_SHIFT;
> + if (timer_config->range)
> + reg3 |= TPS6131X_REG_3_SELSTIM_TO;
> +
> + ret = regmap_update_bits(tps6131x->regmap, TPS6131X_REG_3,
> + TPS6131X_REG_3_STIM | TPS6131X_REG_3_SELSTIM_TO, reg3);
> + if (ret < 0)
> + return ret;
> +
> + fled_cdev->timeout.val = timer_config->time_us;
> +
> + return 0;
> +}
> +
> +static int tps6131x_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
> +{
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + unsigned int reg3;
> + int ret;
> +
> + guard(mutex)(&tps6131x->lock);
> +
> + ret = regmap_read_bypassed(tps6131x->regmap, TPS6131X_REG_3, ®3);
> + if (ret)
> + return ret;
> +
> + *state = !!(reg3 & TPS6131X_REG_3_SFT);
> +
> + return 0;
> +}
> +
> +static int tps6131x_flash_fault_get(struct led_classdev_flash *fled_cdev, u32 *fault)
> +{
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> + unsigned int reg3, reg4, reg6;
> + int ret;
> +
> + *fault = 0;
> +
> + ret = regmap_read_bypassed(tps6131x->regmap, TPS6131X_REG_3, ®3);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_read_bypassed(tps6131x->regmap, TPS6131X_REG_4, ®4);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_read_bypassed(tps6131x->regmap, TPS6131X_REG_6, ®6);
> + if (ret < 0)
> + return ret;
> +
> + if (reg3 & TPS6131X_REG_3_HPFL)
> + *fault |= LED_FAULT_SHORT_CIRCUIT;
> +
> + if (reg3 & TPS6131X_REG_3_SELSTIM_TO)
> + *fault |= LED_FAULT_TIMEOUT;
> +
> + if (reg4 & TPS6131X_REG_4_HOTDIE_HI)
> + *fault |= LED_FAULT_OVER_TEMPERATURE;
> +
> + if (reg6 & (TPS6131X_REG_6_LEDHOT | TPS6131X_REG_6_LEDWARN))
> + *fault |= LED_FAULT_LED_OVER_TEMPERATURE;
> +
> + if (!(reg6 & TPS6131X_REG_6_LEDHDR))
> + *fault |= LED_FAULT_UNDER_VOLTAGE;
> +
> + if (reg6 & TPS6131X_REG_6_LEDHOT) {
> + ret = regmap_update_bits_base(tps6131x->regmap, TPS6131X_REG_6,
> + TPS6131X_REG_6_LEDHOT, 0, NULL, false, true);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct led_flash_ops flash_ops = {
> + .flash_brightness_set = tps6131x_flash_brightness_set,
> + .strobe_set = tps6131x_strobe_set,
> + .strobe_get = tps6131x_strobe_get,
> + .timeout_set = tps6131x_flash_timeout_set,
> + .fault_get = tps6131x_flash_fault_get,
> +};
> +
> +static int tps6131x_parse_node(struct tps6131x *tps6131x)
> +{
> + struct device *dev = &tps6131x->client->dev;
> + int ret;
> + u32 current_ua, timeout_us;
> + const struct tps6131x_timer_config *timer_config;
> + u32 flash_max_i_ma, torch_max_i_ma;
> + u32 current_step_multiplier;
> + u32 channels[TPS6131X_MAX_CHANNELS];
> + unsigned int num_channels;
> + int i;
There doesn't appear to be any ordering of these variables at all
*twitch*
Please employ some kind of structure - I don't mind which.
> +
> + tps6131x->valley_current_limit = device_property_read_bool(dev, "ti,valley-current-limit");
> +
> + tps6131x->led_node = fwnode_get_next_available_child_node(dev->fwnode, NULL);
> + if (!tps6131x->led_node) {
> + dev_err(dev, "Missing LED node\n");
> + return -EINVAL;
> + }
> +
> + num_channels = fwnode_property_count_u32(tps6131x->led_node, "led-sources");
> + if (num_channels <= 0) {
> + dev_err(dev, "Failed to read led-sources property\n");
> + return -EINVAL;
> + }
> +
> + if (num_channels > TPS6131X_MAX_CHANNELS) {
> + dev_err(dev, "led-sources count %u exceeds maximum channel count %u\n",
> + num_channels, TPS6131X_MAX_CHANNELS);
> + return -EINVAL;
> + }
> +
> + ret = fwnode_property_read_u32_array(tps6131x->led_node, "led-sources", channels,
> + num_channels);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read led-sources property\n");
> + return ret;
> + }
> +
> + flash_max_i_ma = 0;
> + torch_max_i_ma = 0;
> + for (i = 0; i < num_channels; i++) {
> + switch (channels[i]) {
> + case 1:
> + tps6131x->chan1_en = true;
> + flash_max_i_ma += TPS6131X_FLASH_MAX_I_CHAN13_MA;
> + torch_max_i_ma += TPS6131X_TORCH_MAX_I_CHAN13_MA;
> + break;
> + case 2:
> + tps6131x->chan2_en = true;
> + flash_max_i_ma += TPS6131X_FLASH_MAX_I_CHAN2_MA;
> + torch_max_i_ma += TPS6131X_TORCH_MAX_I_CHAN2_MA;
> + break;
> + case 3:
> + tps6131x->chan3_en = true;
> + flash_max_i_ma += TPS6131X_FLASH_MAX_I_CHAN13_MA;
> + torch_max_i_ma += TPS6131X_TORCH_MAX_I_CHAN13_MA;
> + break;
> + default:
> + dev_err(dev, "led-source out of range [1-3]\n");
> + return -EINVAL;
> + }
> + }
> +
> + /*
> + * If only channels 1 and 3 are used, the step size is doubled because the two channels
> + * share the same current control register.
> + */
> + current_step_multiplier =
> + (tps6131x->chan1_en && tps6131x->chan3_en && !tps6131x->chan2_en) ? 2 : 1;
> + tps6131x->step_flash_current_ma = current_step_multiplier * TPS6131X_FLASH_STEP_I_MA;
> + tps6131x->step_torch_current_ma = current_step_multiplier * TPS6131X_TORCH_STEP_I_MA;
> +
> + ret = fwnode_property_read_u32(tps6131x->led_node, "led-max-microamp", ¤t_ua);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read led-max-microamp property\n");
> + return ret;
> + }
> +
> + tps6131x->max_torch_current_ma = current_ua / 1000;
There should be a MACRO for these types of conversions.
> +
> + if (!tps6131x->max_torch_current_ma || tps6131x->max_torch_current_ma > torch_max_i_ma ||
> + (tps6131x->max_torch_current_ma % tps6131x->step_torch_current_ma)) {
> + dev_err(dev, "led-max-microamp out of range or not a multiple of %u\n",
> + tps6131x->step_torch_current_ma);
> + return -EINVAL;
> + }
> +
> + ret = fwnode_property_read_u32(tps6131x->led_node, "flash-max-microamp", ¤t_ua);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read flash-max-microamp property\n");
> + return ret;
> + }
> +
> + tps6131x->max_flash_current_ma = current_ua / 1000;
> +
> + if (!tps6131x->max_flash_current_ma || tps6131x->max_flash_current_ma > flash_max_i_ma ||
> + (tps6131x->max_flash_current_ma % tps6131x->step_flash_current_ma)) {
> + dev_err(dev, "flash-max-microamp out of range or not a multiple of %u\n",
> + tps6131x->step_flash_current_ma);
> + return -EINVAL;
> + }
> +
> + ret = fwnode_property_read_u32(tps6131x->led_node, "flash-max-timeout-us", &timeout_us);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read flash-max-timeout-us property\n");
> + return ret;
> + }
> +
> + timer_config = tps6131x_find_closest_timer_config(timeout_us);
> + tps6131x->max_timeout_us = timer_config->time_us;
> +
> + if (tps6131x->max_timeout_us != timeout_us)
> + dev_warn(dev, "flash-max-timeout-us %u not supported (using %u)\n", timeout_us,
> + tps6131x->max_timeout_us);
> +
> + return 0;
> +}
> +
> +static int tps6131x_led_class_setup(struct tps6131x *tps6131x)
> +{
> + struct led_classdev *led_cdev;
> + struct led_flash_setting *setting;
> + struct led_init_data init_data = {};
> + static const struct tps6131x_timer_config *timer_config;
> + int ret;
> +
> + tps6131x->fled_cdev.ops = &flash_ops;
> +
> + setting = &tps6131x->fled_cdev.timeout;
> + timer_config = tps6131x_find_closest_timer_config(0);
> + setting->min = timer_config->time_us;
> + setting->max = tps6131x->max_timeout_us;
> + setting->step = 1; /* Only some specific time periods are supported. No fixed step size. */
> + setting->val = setting->min;
> +
> + setting = &tps6131x->fled_cdev.brightness;
> + setting->min = tps6131x->step_flash_current_ma;
> + setting->max = tps6131x->max_flash_current_ma;
> + setting->step = tps6131x->step_flash_current_ma;
> + setting->val = setting->min;
> +
> + led_cdev = &tps6131x->fled_cdev.led_cdev;
> + led_cdev->brightness_set_blocking = tps6131x_brightness_set;
> + led_cdev->max_brightness = tps6131x->max_torch_current_ma;
> + led_cdev->flags |= LED_DEV_CAP_FLASH;
> +
> + init_data.fwnode = tps6131x->led_node;
> + init_data.devicename = NULL;
> + init_data.default_label = NULL;
> + init_data.devname_mandatory = false;
> +
> + ret = devm_led_classdev_flash_register_ext(&tps6131x->client->dev, &tps6131x->fled_cdev,
> + &init_data);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
Not keen on #ifery in C files.
Can you use is_defined() and return early instead?
I see that there is a precedent for this already. :(
> +static int tps6131x_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
> +{
> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
> + struct tps6131x *tps6131x = fled_cdev_to_tps6131x(fled_cdev);
> +
> + guard(mutex)(&tps6131x->lock);
> +
/> + return tps6131x_set_mode(tps6131x, enable ? TPS6131X_MODE_FLASH : TPS6131X_MODE_SHUTDOWN,
> + false);
> +}
> +
> +static const struct v4l2_flash_ops tps6131x_v4l2_flash_ops = {
> + .external_strobe_set = tps6131x_flash_external_strobe_set,
> +};
> +
> +static int tps6131x_v4l2_setup(struct tps6131x *tps6131x)
> +{
> + struct v4l2_flash_config v4l2_cfg = { 0 };
> + struct led_flash_setting *intensity = &v4l2_cfg.intensity;
> +
> + intensity->min = tps6131x->step_torch_current_ma;
> + intensity->max = tps6131x->max_torch_current_ma;
> + intensity->step = tps6131x->step_torch_current_ma;
> + intensity->val = intensity->min;
> +
> + strscpy(v4l2_cfg.dev_name, tps6131x->fled_cdev.led_cdev.dev->kobj.name,
tps6131x->client->dev?
> + sizeof(v4l2_cfg.dev_name));
> +
> + v4l2_cfg.has_external_strobe = true;
> + v4l2_cfg.flash_faults = LED_FAULT_TIMEOUT | LED_FAULT_OVER_TEMPERATURE |
> + LED_FAULT_SHORT_CIRCUIT | LED_FAULT_UNDER_VOLTAGE |
> + LED_FAULT_LED_OVER_TEMPERATURE;
> +
> + tps6131x->v4l2_flash = v4l2_flash_init(&tps6131x->client->dev, tps6131x->led_node,
> + &tps6131x->fled_cdev, &tps6131x_v4l2_flash_ops,
> + &v4l2_cfg);
> + if (IS_ERR(tps6131x->v4l2_flash)) {
> + dev_err(&tps6131x->client->dev, "v4l2_flash_init failed\n");
"Failed to initialise V4L2 flash LED" ?
> + return PTR_ERR(tps6131x->v4l2_flash);
> + }
> +
> + return 0;
> +}
> +
> +#else
> +
> +static int tps6131x_v4l2_setup(struct tps6131x *tps6131x)
> +{
> + return 0;
> +}
> +
> +#endif
> +
> +static int tps6131x_probe(struct i2c_client *client)
> +{
> + struct tps6131x *tps6131x;
> + int ret;
> +
> + tps6131x = devm_kzalloc(&client->dev, sizeof(*tps6131x), GFP_KERNEL);
> + if (!tps6131x)
> + return -ENOMEM;
> +
> + tps6131x->client = client;
What are you planning on using client for?
> + i2c_set_clientdata(client, tps6131x);
How are you going to _get_ this without client?
Why not save dev and reduce the amount of dereferencing levels required.
> + mutex_init(&tps6131x->lock);
> + INIT_DELAYED_WORK(&tps6131x->torch_refresh_work, tps6131x_torch_refresh_handler);
> +
> + ret = tps6131x_parse_node(tps6131x);
> + if (ret)
> + return -ENODEV;
> +
> + tps6131x->regmap = devm_regmap_init_i2c(client, &tps6131x_regmap);
> + if (IS_ERR(tps6131x->regmap)) {
> + ret = PTR_ERR(tps6131x->regmap);
> + dev_err(&client->dev, "Failed to allocate register map\n");
> + return ret;
> + }
> +
> + tps6131x->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
> + ret = tps6131x_reset_chip(tps6131x);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to reset LED controller\n");
How do you manage the optional part?
> + ret = tps6131x_init_chip(tps6131x);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to initialize LED controller\n");
> +
> + ret = tps6131x_led_class_setup(tps6131x);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to setup led class\n");
Always "LED"
> + ret = tps6131x_v4l2_setup(tps6131x);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to setup v4l2 flash\n");
> +
> + return 0;
> +}
> +
> +static void tps6131x_remove(struct i2c_client *client)
> +{
> + struct tps6131x *tps6131x = i2c_get_clientdata(client);
> +
> + v4l2_flash_release(tps6131x->v4l2_flash);
> +
> + cancel_delayed_work_sync(&tps6131x->torch_refresh_work);
> +}
> +
> +static const struct of_device_id of_tps6131x_leds_match[] = {
> + { .compatible = "ti,tps61310" },
> + { .compatible = "ti,tps61311" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, of_tps6131x_leds_match);
> +
> +static struct i2c_driver tps6131x_i2c_driver = {
> + .driver = {
> + .name = "tps6131x",
> + .of_match_table = of_tps6131x_leds_match,
> + },
> + .probe = tps6131x_probe,
> + .remove = tps6131x_remove,
> +};
> +module_i2c_driver(tps6131x_i2c_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments TPS6131X flash LED driver");
> +MODULE_AUTHOR("Matthias Fend <matthias.fend@xxxxxxxxx>");
> +MODULE_LICENSE("GPL");
>
> --
> 2.34.1
>
--
Lee Jones [李琼斯]
