Re: (subset) [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 05 Jul 2024 15:55:01 +0800, Fenglin Wu wrote:
> The flash module has status bits to indicate different thermal
> conditions which are called as OTSTx. For each OTSTx status,
> there is a recommended total flash current for all channels to
> prevent the flash module entering into higher thermal level.
> For example, the total flash current should be limited to 1000mA/500mA
> respectively when the HW reaches the OTST1/OTST2 thermal level.
> 
> [...]

Applied, thanks!

[1/1] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
      commit: 3db5127c28f8faa1c245588ab982f72d033e1de4

--
Lee Jones [李琼斯]





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux