[PATCH v3 4/4] leds: pca9532: Change default blinking frequency to 1Hz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Default blinking period is set to 2s. This is too long to be handled by
the hardware (maximum is 1.69s).

Set the default blinking period to 1s to match what is done in the
other LED drivers.

Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
 drivers/leds/leds-pca9532.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 673d4d5b62bb..266f6e5001be 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -247,8 +247,8 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
 
 	if (*delay_on == 0 && *delay_off == 0) {
 		/* led subsystem ask us for a blink rate */
-		*delay_on = 1000;
-		*delay_off = 1000;
+		*delay_on = 500;
+		*delay_off = 500;
 	}
 
 	err = pca9532_update_hw_blink(led, *delay_on, *delay_off);
-- 
2.45.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux