On Thu, 13 Jun 2024, Thomas Weißschuh wrote:
> The ChromeOS Embedded Controller exposes an LED control command.
> Expose its functionality through the leds subsystem.
>
> The LEDs are exposed as multicolor devices.
> A hardware trigger, which is active by default, is provided to let the
> EC itself take over control over the LED.
>
> The driver is designed to be probed via the cros_ec mfd device.
>
> Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 5 +
> drivers/leds/Kconfig | 15 +++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-cros_ec.c | 299 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 320 insertions(+)
Mostly fine. Couple of points.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aacccb376c28..8bc3491a08af 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5135,6 +5135,11 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> F: sound/soc/codecs/cros_ec_codec.*
>
> +CHROMEOS EC LED DRIVER
> +M: Thomas Weißschuh <thomas@xxxxxxxxxxxxxx>
> +S: Maintained
> +F: drivers/leds/leds-cros_ec.c
> +
> CHROMEOS EC SUBDRIVERS
> M: Benson Leung <bleung@xxxxxxxxxxxx>
> R: Guenter Roeck <groeck@xxxxxxxxxxxx>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 05e6af88b88c..aa2fec9a34ed 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -179,6 +179,21 @@ config LEDS_CR0014114
> To compile this driver as a module, choose M here: the module
> will be called leds-cr0014114.
>
> +config LEDS_CROS_EC
> + tristate "LED Support for ChromeOS EC"
> + depends on MFD_CROS_EC_DEV
> + depends on LEDS_CLASS_MULTICOLOR
> + select LEDS_TRIGGERS
> + default MFD_CROS_EC_DEV
> + help
> + This option enables support for LEDs managed by ChromeOS ECs.
> + All LEDs exposed by the EC are supported in multicolor mode.
> + A hardware trigger to switch back to the automatic behaviour is
> + provided.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called leds-cros_ec.
> +
> config LEDS_EL15203000
> tristate "LED Support for Crane EL15203000"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index effdfc6f1e95..3491904e13f7 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
> obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
> obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o
> +obj-$(CONFIG_LEDS_CROS_EC) += leds-cros_ec.o
> obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
> obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o
> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
> diff --git a/drivers/leds/leds-cros_ec.c b/drivers/leds/leds-cros_ec.c
> new file mode 100644
> index 000000000000..7bb21a587713
> --- /dev/null
> +++ b/drivers/leds/leds-cros_ec.c
> @@ -0,0 +1,299 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ChromeOS EC LED Driver
> + *
> + * Copyright (C) 2024 Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> +
> +#define DRV_NAME "cros-ec-led"
Please refrain from defining device names. Use the string in-place.
> +static const char * const cros_ec_led_functions[] = {
> + [EC_LED_ID_BATTERY_LED] = LED_FUNCTION_CHARGING,
> + [EC_LED_ID_POWER_LED] = LED_FUNCTION_POWER,
> + [EC_LED_ID_ADAPTER_LED] = "adapter",
> + [EC_LED_ID_LEFT_LED] = "left",
> + [EC_LED_ID_RIGHT_LED] = "right",
> + [EC_LED_ID_RECOVERY_HW_REINIT_LED] = "recovery-hw-reinit",
> + [EC_LED_ID_SYSRQ_DEBUG_LED] = "sysrq-debug",
> +};
> +
> +static_assert(ARRAY_SIZE(cros_ec_led_functions) == EC_LED_ID_COUNT);
What does this do? Result in a build failure?
> +static const int cros_ec_led_to_linux_id[] = {
> + [EC_LED_COLOR_RED] = LED_COLOR_ID_RED,
> + [EC_LED_COLOR_GREEN] = LED_COLOR_ID_GREEN,
> + [EC_LED_COLOR_BLUE] = LED_COLOR_ID_BLUE,
> + [EC_LED_COLOR_YELLOW] = LED_COLOR_ID_YELLOW,
> + [EC_LED_COLOR_WHITE] = LED_COLOR_ID_WHITE,
> + [EC_LED_COLOR_AMBER] = LED_COLOR_ID_AMBER,
> +};
> +
> +static_assert(ARRAY_SIZE(cros_ec_led_to_linux_id) == EC_LED_COLOR_COUNT);
> +
> +static const int cros_ec_linux_to_ec_id[] = {
> + [LED_COLOR_ID_RED] = EC_LED_COLOR_RED,
> + [LED_COLOR_ID_GREEN] = EC_LED_COLOR_GREEN,
> + [LED_COLOR_ID_BLUE] = EC_LED_COLOR_BLUE,
> + [LED_COLOR_ID_YELLOW] = EC_LED_COLOR_YELLOW,
> + [LED_COLOR_ID_WHITE] = EC_LED_COLOR_WHITE,
> + [LED_COLOR_ID_AMBER] = EC_LED_COLOR_AMBER,
> +};
> +
> +struct cros_ec_led_priv {
> + struct led_classdev_mc led_mc_cdev;
> + struct cros_ec_device *cros_ec;
> + enum ec_led_id led_id;
> +};
> +
> +static inline struct cros_ec_led_priv *cros_ec_led_cdev_to_priv(struct led_classdev *led_cdev)
> +{
> + return container_of(lcdev_to_mccdev(led_cdev), struct cros_ec_led_priv, led_mc_cdev);
> +}
> +
> +union cros_ec_led_cmd_data {
> + struct ec_params_led_control req;
> + struct ec_response_led_control resp;
> +} __packed;
> +
> +static int cros_ec_led_send_cmd(struct cros_ec_device *cros_ec,
> + union cros_ec_led_cmd_data *arg)
> +{
> + int ret;
> + struct {
> + struct cros_ec_command msg;
> + union cros_ec_led_cmd_data data;
> + } __packed buf = {
> + .msg = {
> + .version = 1,
> + .command = EC_CMD_LED_CONTROL,
> + .insize = sizeof(arg->resp),
> + .outsize = sizeof(arg->req),
> + },
> + .data.req = arg->req
> + };
> +
> + ret = cros_ec_cmd_xfer_status(cros_ec, &buf.msg);
> + if (ret < 0)
> + return ret;
> +
> + arg->resp = buf.data.resp;
> +
> + return 0;
> +}
> +
> +static int cros_ec_led_trigger_activate(struct led_classdev *led_cdev)
> +{
> + struct cros_ec_led_priv *priv = cros_ec_led_cdev_to_priv(led_cdev);
> + union cros_ec_led_cmd_data arg = {};
> +
> + arg.req.led_id = priv->led_id;
> + arg.req.flags = EC_LED_FLAGS_AUTO;
> +
> + return cros_ec_led_send_cmd(priv->cros_ec, &arg);
> +}
> +
> +static struct led_hw_trigger_type cros_ec_led_trigger_type;
> +
> +static struct led_trigger cros_ec_led_trigger = {
> + .name = "chromeos-auto",
> + .trigger_type = &cros_ec_led_trigger_type,
> + .activate = cros_ec_led_trigger_activate,
> +};
> +
> +static int cros_ec_led_brightness_set_blocking(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct cros_ec_led_priv *priv = cros_ec_led_cdev_to_priv(led_cdev);
> + union cros_ec_led_cmd_data arg = {};
> + enum ec_led_colors led_color;
> + struct mc_subled *subled;
> + size_t i;
> +
> + led_mc_calc_color_components(&priv->led_mc_cdev, brightness);
> +
> + arg.req.led_id = priv->led_id;
> +
> + for (i = 0; i < priv->led_mc_cdev.num_colors; i++) {
> + subled = &priv->led_mc_cdev.subled_info[i];
> + led_color = cros_ec_linux_to_ec_id[subled->color_index];
> + arg.req.brightness[led_color] = subled->brightness;
> + }
> +
> + return cros_ec_led_send_cmd(priv->cros_ec, &arg);
> +}
> +
> +static int cros_ec_led_count_subleds(struct device *dev,
> + struct ec_response_led_control *resp,
> + unsigned int *max_brightness)
> +{
> + unsigned int range, common_range = 0;
> + int num_subleds = 0;
> + size_t i;
> +
> + for (i = 0; i < EC_LED_COLOR_COUNT; i++) {
> + range = resp->brightness_range[i];
> +
> + if (!range)
> + continue;
> +
> + num_subleds++;
> +
> + if (!common_range)
> + common_range = range;
> +
> + if (common_range != range) {
> + /* The multicolor LED API expects a uniform max_brightness */
> + dev_warn(dev, "Inconsistent LED brightness values\n");
You shouldn't print a warning then return an error.
Please upgrade to dev_err().
> + return -EINVAL;
> + }
> + }
> +
> + if (!num_subleds)
> + return -EINVAL;
> +
> + *max_brightness = common_range;
> + return num_subleds;
> +}
> +
> +static const char *cros_ec_led_get_color_name(struct led_classdev_mc *led_mc_cdev)
> +{
> + int color;
> +
> + if (led_mc_cdev->num_colors == 1)
> + color = led_mc_cdev->subled_info[0].color_index;
> + else
> + color = LED_COLOR_ID_MULTI;
> +
> + return led_get_color_name(color);
> +}
> +
> +static int cros_ec_led_probe_led(struct device *dev, struct cros_ec_device *cros_ec,
Odd naming choice.
How about cros_ec_led_probe_one() or cros_ec_led_init()?
> + enum ec_led_id id)
> +{
> + union cros_ec_led_cmd_data arg = {};
> + struct cros_ec_led_priv *priv;
> + struct led_classdev *led_cdev;
> + struct mc_subled *subleds;
> + int ret, num_subleds;
> + size_t i, subled;
Why size_t for the iterator?
> + arg.req.led_id = id;
> + arg.req.flags = EC_LED_FLAGS_QUERY;
> + ret = cros_ec_led_send_cmd(cros_ec, &arg);
> + /* Unknown LED, skip */
Place the comment inside the if() or next to the return.
> + if (ret == -EINVAL)
> + return 0;
> + if (ret == -EOPNOTSUPP)
> + return -ENODEV;
> + if (ret < 0)
> + return ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + num_subleds = cros_ec_led_count_subleds(dev, &arg.resp,
> + &priv->led_mc_cdev.led_cdev.max_brightness);
> + if (num_subleds < 0)
> + return num_subleds;
> +
> + priv->cros_ec = cros_ec;
> + priv->led_id = id;
> +
> + subleds = devm_kcalloc(dev, num_subleds, sizeof(*subleds), GFP_KERNEL);
> + if (!subleds)
> + return -ENOMEM;
> +
> + subled = 0;
> + for (i = 0; i < EC_LED_COLOR_COUNT; i++) {
> + if (!arg.resp.brightness_range[i])
> + continue;
> +
> + subleds[subled].color_index = cros_ec_led_to_linux_id[i];
> + if (subled == 0)
> + subleds[subled].intensity = 100;
> + subled++;
> + }
> +
> + priv->led_mc_cdev.subled_info = subleds;
> + priv->led_mc_cdev.num_colors = num_subleds;
> +
> + led_cdev = &priv->led_mc_cdev.led_cdev;
> + led_cdev->brightness_set_blocking = cros_ec_led_brightness_set_blocking;
> + led_cdev->trigger_type = &cros_ec_led_trigger_type;
> + led_cdev->default_trigger = cros_ec_led_trigger.name;
> + led_cdev->hw_control_trigger = cros_ec_led_trigger.name;
> +
> + led_cdev->name = devm_kasprintf(dev, GFP_KERNEL, "chromeos:%s:%s",
> + cros_ec_led_get_color_name(&priv->led_mc_cdev),
> + cros_ec_led_functions[id]);
> + if (!led_cdev->name)
> + return -ENOMEM;
> +
> + return devm_led_classdev_multicolor_register(dev, &priv->led_mc_cdev);
> +}
> +
> +static int cros_ec_led_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
> + struct cros_ec_device *cros_ec = ec_dev->ec_dev;
> + int ret = 0;
> + size_t i;
> +
> + for (i = 0; i < EC_LED_ID_COUNT; i++) {
> + ret = cros_ec_led_probe_led(dev, cros_ec, i);
> + if (ret)
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct platform_device_id cros_ec_led_id[] = {
> + { DRV_NAME, 0 },
> + {}
> +};
> +
> +static struct platform_driver cros_ec_led_driver = {
> + .driver.name = DRV_NAME,
> + .probe = cros_ec_led_probe,
> + .id_table = cros_ec_led_id,
> +};
> +
> +static int __init cros_ec_led_init(void)
> +{
> + int ret;
> +
> + ret = led_trigger_register(&cros_ec_led_trigger);
> + if (ret)
> + return ret;
This has to be done before probe?
> + ret = platform_driver_register(&cros_ec_led_driver);
> + if (ret)
> + led_trigger_unregister(&cros_ec_led_trigger);
> +
> + return ret;
> +};
> +module_init(cros_ec_led_init);
> +
> +static void __exit cros_ec_led_exit(void)
> +{
> + platform_driver_unregister(&cros_ec_led_driver);
> + led_trigger_unregister(&cros_ec_led_trigger);
> +};
> +module_exit(cros_ec_led_exit);
> +
> +MODULE_DEVICE_TABLE(platform, cros_ec_led_id);
> +MODULE_DESCRIPTION("ChromeOS EC LED Driver");
> +MODULE_AUTHOR("Thomas Weißschuh <linux@xxxxxxxxxxxxxx");
> +MODULE_LICENSE("GPL");
>
> --
> 2.45.2
>
--
Lee Jones [李琼斯]
