Currently, all LED LPG devices will call lpg_{set,clear}_pbs_trigger()
when setting brightness regardless of if they support PPG and have PBS
triggers. Check if device supports PPG before setting/clearing PBS
triggers.
Fixes: 6ab1f766a80a ("leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM")
Fixes: 5e9ff626861a ("leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM")
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
drivers/leds/rgb/leds-qcom-lpg.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 9467c796bd04..e74b2ceed1c2 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -2,7 +2,7 @@
/*
* Copyright (c) 2017-2022 Linaro Ltd
* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/bits.h>
#include <linux/bitfield.h>
@@ -254,6 +254,9 @@ static int lpg_clear_pbs_trigger(struct lpg *lpg, unsigned int lut_mask)
u8 val = 0;
int rc;
+ if (!lpg->lpg_chan_sdam)
+ return 0;
+
lpg->pbs_en_bitmap &= (~lut_mask);
if (!lpg->pbs_en_bitmap) {
rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
@@ -276,6 +279,9 @@ static int lpg_set_pbs_trigger(struct lpg *lpg, unsigned int lut_mask)
u8 val = PBS_SW_TRIG_BIT;
int rc;
+ if (!lpg->lpg_chan_sdam)
+ return 0;
+
if (!lpg->pbs_en_bitmap) {
rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
if (rc < 0)
--
2.34.1
