There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/leds/leds-spi-byte.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/leds/leds-spi-byte.c b/drivers/leds/leds-spi-byte.c
index 985bbbed251b..d24d0ddf347c 100644
--- a/drivers/leds/leds-spi-byte.c
+++ b/drivers/leds/leds-spi-byte.c
@@ -56,13 +56,6 @@ static const struct spi_byte_chipdef ubnt_acb_spi_led_cdef = {
.max_value = 0x3F,
};
-static const struct of_device_id spi_byte_dt_ids[] = {
- { .compatible = "ubnt,acb-spi-led", .data = &ubnt_acb_spi_led_cdef },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, spi_byte_dt_ids);
-
static int spi_byte_brightness_set_blocking(struct led_classdev *dev,
enum led_brightness brightness)
{
@@ -122,6 +115,12 @@ static int spi_byte_probe(struct spi_device *spi)
return devm_led_classdev_register_ext(dev, &led->ldev, &init_data);
}
+static const struct of_device_id spi_byte_dt_ids[] = {
+ { .compatible = "ubnt,acb-spi-led", .data = &ubnt_acb_spi_led_cdef },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spi_byte_dt_ids);
+
static struct spi_driver spi_byte_driver = {
.probe = spi_byte_probe,
.driver = {
--
2.43.0.rc1.1336.g36b5255a03ac
