Remove unused code for amber LED colour.
In case system LED color is "red", "orange" or "amber" same code is to
be used for colour setting.
Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx>
Reviewed-by: Michael Shych <michaelsh@xxxxxxxxxx>
---
drivers/leds/leds-mlxreg.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
index b7855c93bd72..916544e95e26 100644
--- a/drivers/leds/leds-mlxreg.c
+++ b/drivers/leds/leds-mlxreg.c
@@ -19,7 +19,6 @@
#define MLXREG_LED_IS_OFF 0x00 /* Off */
#define MLXREG_LED_RED_SOLID 0x05 /* Solid red */
#define MLXREG_LED_GREEN_SOLID 0x0D /* Solid green */
-#define MLXREG_LED_AMBER_SOLID 0x09 /* Solid amber */
#define MLXREG_LED_BLINK_3HZ 167 /* ~167 msec off/on - HW support */
#define MLXREG_LED_BLINK_6HZ 83 /* ~83 msec off/on - HW support */
#define MLXREG_LED_CAPABILITY_CLEAR GENMASK(31, 8) /* Clear mask */
@@ -218,13 +217,10 @@ static int mlxreg_led_config(struct mlxreg_led_priv_data *priv)
led_cdev = &led_data->led_cdev;
led_data->data_parent = priv;
- if (strstr(data->label, "red") ||
- strstr(data->label, "orange")) {
+ if (strstr(data->label, "red") || strstr(data->label, "orange") ||
+ strstr(data->label, "amber")) {
brightness = LED_OFF;
led_data->base_color = MLXREG_LED_RED_SOLID;
- } else if (strstr(data->label, "amber")) {
- brightness = LED_OFF;
- led_data->base_color = MLXREG_LED_AMBER_SOLID;
} else {
brightness = LED_OFF;
led_data->base_color = MLXREG_LED_GREEN_SOLID;
--
2.20.1
