At least since the YAML conversion, the default-state property is described in leds/common.yaml, so there's no need to point to another file for its definition. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- v3: - Rebase on v6.3-rc6 v2: - https://lore.kernel.org/lkml/20221008131918.1235397-1-j.neuschaefer@xxxxxxx/ - Add Rob's ACK - Rebase on Marek Vasut's patch in -next --- Documentation/devicetree/bindings/leds/common.yaml | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 15e3f6645682e..c9b0dde44986c 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -83,8 +83,7 @@ properties: - enum: # LED will act as a back-light, controlled by the framebuffer system - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + # LED will turn on (see also "default-state" property) - default-on # LED "double" flashes at a load average based rate - heartbeat -- 2.39.2
