Hans,
this is based on your tag "ib-pdx86-simatic-v6.6" as you requested.
Henning
Am Tue, 18 Jul 2023 12:52:13 +0200
schrieb Henning Schild <henning.schild@xxxxxxxxxxx>:
> Users without a Siemens Simatic IPC will not care about any of these
> drivers. Users who do care can enable the submenu and all drivers
> behind it will be enabled.
>
> Suggested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
> ---
> drivers/platform/x86/Kconfig | 59 +-------------
> drivers/platform/x86/Makefile | 6 +-
> drivers/platform/x86/siemens/Kconfig | 77
> +++++++++++++++++++ drivers/platform/x86/siemens/Makefile |
> 11 +++ .../simatic-ipc-batt-apollolake.c | 0
> .../simatic-ipc-batt-elkhartlake.c | 0
> .../{ => siemens}/simatic-ipc-batt-f7188x.c | 0
> .../x86/{ => siemens}/simatic-ipc-batt.c | 0
> .../x86/{ => siemens}/simatic-ipc-batt.h | 0
> .../platform/x86/{ => siemens}/simatic-ipc.c | 0
> 10 files changed, 90 insertions(+), 63 deletions(-)
> create mode 100644 drivers/platform/x86/siemens/Kconfig
> create mode 100644 drivers/platform/x86/siemens/Makefile
> rename drivers/platform/x86/{ =>
> siemens}/simatic-ipc-batt-apollolake.c (100%) rename
> drivers/platform/x86/{ => siemens}/simatic-ipc-batt-elkhartlake.c
> (100%) rename drivers/platform/x86/{ =>
> siemens}/simatic-ipc-batt-f7188x.c (100%) rename
> drivers/platform/x86/{ => siemens}/simatic-ipc-batt.c (100%) rename
> drivers/platform/x86/{ => siemens}/simatic-ipc-batt.h (100%) rename
> drivers/platform/x86/{ => siemens}/simatic-ipc.c (100%)
>
> diff --git a/drivers/platform/x86/Kconfig
> b/drivers/platform/x86/Kconfig index 487d3d8f4da9..f5fcb1ca1b63 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1074,64 +1074,7 @@ config INTEL_SCU_IPC_UTIL
> low level access for debug work and updating the firmware.
> Say N unless you will be doing this on an Intel MID platform.
>
> -config SIEMENS_SIMATIC_IPC
> - tristate "Siemens Simatic IPC Class driver"
> - help
> - This Simatic IPC class driver is the central of several
> drivers. It
> - is mainly used for system identification, after which
> drivers in other
> - classes will take care of driving specifics of those
> machines.
> - i.e. LEDs and watchdog.
> -
> - To compile this driver as a module, choose M here: the
> module
> - will be called simatic-ipc.
> -
> -config SIEMENS_SIMATIC_IPC_BATT
> - tristate "CMOS battery driver for Siemens Simatic IPCs"
> - depends on HWMON
> - depends on SIEMENS_SIMATIC_IPC
> - default SIEMENS_SIMATIC_IPC
> - help
> - This option enables support for monitoring the voltage of
> the CMOS
> - batteries of several Industrial PCs from Siemens.
> -
> - To compile this driver as a module, choose M here: the
> module
> - will be called simatic-ipc-batt.
> -
> -config SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE
> - tristate "CMOS Battery monitoring for Simatic IPCs based on
> Apollo Lake GPIO"
> - depends on PINCTRL_BROXTON
> - depends on SIEMENS_SIMATIC_IPC_BATT
> - default SIEMENS_SIMATIC_IPC_BATT
> - help
> - This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> - from Siemens based on Apollo Lake GPIO.
> -
> - To compile this driver as a module, choose M here: the
> module
> - will be called simatic-ipc-batt-apollolake.
> -
> -config SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE
> - tristate "CMOS Battery monitoring for Simatic IPCs based on
> Elkhart Lake GPIO"
> - depends on PINCTRL_ELKHARTLAKE
> - depends on SIEMENS_SIMATIC_IPC_BATT
> - default SIEMENS_SIMATIC_IPC_BATT
> - help
> - This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> - from Siemens based on Elkhart Lake GPIO.
> -
> - To compile this driver as a module, choose M here: the
> module
> - will be called simatic-ipc-batt-elkhartlake.
> -
> -config SIEMENS_SIMATIC_IPC_BATT_F7188X
> - tristate "CMOS Battery monitoring for Simatic IPCs based on
> Nuvoton GPIO"
> - depends on GPIO_F7188X
> - depends on SIEMENS_SIMATIC_IPC_BATT
> - default SIEMENS_SIMATIC_IPC_BATT
> - help
> - This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> - from Siemens based on Nuvoton GPIO.
> -
> - To compile this driver as a module, choose M here: the
> module
> - will be called simatic-ipc-batt-elkhartlake.
> +source "drivers/platform/x86/siemens/Kconfig"
>
> config WINMATE_FM07_KEYS
> tristate "Winmate FM07/FM07P front-panel keys driver"
> diff --git a/drivers/platform/x86/Makefile
> b/drivers/platform/x86/Makefile index 522da0d1584d..f3bf4b90b878
> 100644 --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -131,11 +131,7 @@ obj-$(CONFIG_INTEL_SCU_IPC_UTIL) +=
> intel_scu_ipcutil.o obj-$(CONFIG_X86_INTEL_LPSS) +=
> pmc_atom.o
> # Siemens Simatic Industrial PCs
> -obj-$(CONFIG_SIEMENS_SIMATIC_IPC) +=
> simatic-ipc.o -obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT)
> += simatic-ipc-batt.o
> -obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE) +=
> simatic-ipc-batt-apollolake.o
> -obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE) +=
> simatic-ipc-batt-elkhartlake.o
> -obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_F7188X) +=
> simatic-ipc-batt-f7188x.o
> +obj-$(CONFIG_X86_PLATFORM_DRIVERS_SIEMENS) +=
> siemens/ # Winmate obj-$(CONFIG_WINMATE_FM07_KEYS) +=
> winmate-fm07-keys.o diff --git a/drivers/platform/x86/siemens/Kconfig
> b/drivers/platform/x86/siemens/Kconfig new file mode 100644 index
> 000000000000..64479f83698c --- /dev/null +++
> b/drivers/platform/x86/siemens/Kconfig @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Siemens X86 Platform Specific Drivers
> +#
> +
> +menuconfig X86_PLATFORM_DRIVERS_SIEMENS
> + bool "Siemens X86 Platform Specific Device Drivers"
> + help
> + Say Y here to get to see options for device drivers for
> various
> + Siemens x86 platforms, mainly Simatic Industrial PCs.
> + This option alone does not add any kernel code.
> +
> + If you say N, all options in this submenu will be skipped
> and disabled. +
> +if X86_PLATFORM_DRIVERS_SIEMENS
> +
> +config SIEMENS_SIMATIC_IPC
> + tristate "Siemens Simatic IPC Class driver"
> + default m
> + help
> + This Simatic IPC class driver is the central of several
> drivers. It
> + is mainly used for system identification, after which
> drivers in other
> + classes will take care of driving specifics of those
> machines.
> + i.e. LEDs and watchdog.
> +
> + To compile this driver as a module, choose M here: the
> module
> + will be called simatic-ipc.
> +
> +config SIEMENS_SIMATIC_IPC_BATT
> + tristate "CMOS battery driver for Siemens Simatic IPCs"
> + depends on HWMON
> + depends on SIEMENS_SIMATIC_IPC
> + default SIEMENS_SIMATIC_IPC
> + help
> + This option enables support for monitoring the voltage of
> the CMOS
> + batteries of several Industrial PCs from Siemens.
> +
> + To compile this driver as a module, choose M here: the
> module
> + will be called simatic-ipc-batt.
> +
> +config SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE
> + tristate "CMOS Battery monitoring for Simatic IPCs based on
> Apollo Lake GPIO"
> + depends on PINCTRL_BROXTON
> + depends on SIEMENS_SIMATIC_IPC_BATT
> + default SIEMENS_SIMATIC_IPC_BATT
> + help
> + This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> + from Siemens based on Apollo Lake GPIO.
> +
> + To compile this driver as a module, choose M here: the
> module
> + will be called simatic-ipc-batt-apollolake.
> +
> +config SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE
> + tristate "CMOS Battery monitoring for Simatic IPCs based on
> Elkhart Lake GPIO"
> + depends on PINCTRL_ELKHARTLAKE
> + depends on SIEMENS_SIMATIC_IPC_BATT
> + default SIEMENS_SIMATIC_IPC_BATT
> + help
> + This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> + from Siemens based on Elkhart Lake GPIO.
> +
> + To compile this driver as a module, choose M here: the
> module
> + will be called simatic-ipc-batt-elkhartlake.
> +
> +config SIEMENS_SIMATIC_IPC_BATT_F7188X
> + tristate "CMOS Battery monitoring for Simatic IPCs based on
> Nuvoton GPIO"
> + depends on GPIO_F7188X
> + depends on SIEMENS_SIMATIC_IPC_BATT
> + default SIEMENS_SIMATIC_IPC_BATT
> + help
> + This option enables CMOS battery monitoring for Simatic
> Industrial PCs
> + from Siemens based on Nuvoton GPIO.
> +
> + To compile this driver as a module, choose M here: the
> module
> + will be called simatic-ipc-batt-elkhartlake.
> +
> +endif # X86_PLATFORM_DRIVERS_SIEMENS
> diff --git a/drivers/platform/x86/siemens/Makefile
> b/drivers/platform/x86/siemens/Makefile new file mode 100644
> index 000000000000..2b384b4cb8ba
> --- /dev/null
> +++ b/drivers/platform/x86/siemens/Makefile
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Makefile for linux/drivers/platform/x86/siemens
> +# Siemens x86 Platform-Specific Drivers
> +#
> +
> +obj-$(CONFIG_SIEMENS_SIMATIC_IPC) +=
> simatic-ipc.o +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT)
> += simatic-ipc-batt.o
> +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE) +=
> simatic-ipc-batt-apollolake.o
> +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE) +=
> simatic-ipc-batt-elkhartlake.o
> +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_BATT_F7188X) +=
> simatic-ipc-batt-f7188x.o diff --git
> a/drivers/platform/x86/simatic-ipc-batt-apollolake.c
> b/drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c
> similarity index 100% rename from
> drivers/platform/x86/simatic-ipc-batt-apollolake.c rename to
> drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c diff --git
> a/drivers/platform/x86/simatic-ipc-batt-elkhartlake.c
> b/drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c
> similarity index 100% rename from
> drivers/platform/x86/simatic-ipc-batt-elkhartlake.c rename to
> drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c diff
> --git a/drivers/platform/x86/simatic-ipc-batt-f7188x.c
> b/drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c similarity
> index 100% rename from drivers/platform/x86/simatic-ipc-batt-f7188x.c
> rename to drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c diff
> --git a/drivers/platform/x86/simatic-ipc-batt.c
> b/drivers/platform/x86/siemens/simatic-ipc-batt.c similarity index
> 100% rename from drivers/platform/x86/simatic-ipc-batt.c rename to
> drivers/platform/x86/siemens/simatic-ipc-batt.c diff --git
> a/drivers/platform/x86/simatic-ipc-batt.h
> b/drivers/platform/x86/siemens/simatic-ipc-batt.h similarity index
> 100% rename from drivers/platform/x86/simatic-ipc-batt.h rename to
> drivers/platform/x86/siemens/simatic-ipc-batt.h diff --git
> a/drivers/platform/x86/simatic-ipc.c
> b/drivers/platform/x86/siemens/simatic-ipc.c similarity index 100%
> rename from drivers/platform/x86/simatic-ipc.c rename to
> drivers/platform/x86/siemens/simatic-ipc.c
